Low-Density Parity-Check Code Decoder Design and Error Characterization on an FPGA Based Framework

Low-Density Parity-Check (LDPC) codes have gained popularity in communication systems and standards due to their capacity approaching error correction performance. Among all the hard-decision based LDPC decoders, Gallager B (GaB), due to simplicity of its operations, poses as the most hardware friendly algorithm and an attractive solution for meeting the high-throughput demand in communication systems. However, GaB sufferers from poor error correction performance. In this work, we first propose a resource efficient GaB hardware architecture that delivers the best throughput while using fewest Field Programmable Gate Array (FPGA) resources with respect to the state of the art comparable LDPC decoding algorithms. We then introduce a Probabilistic GaB (PGaB) algorithm that disturbs the decisions made during the decoding iterations randomly with a probability value determined based on experimental studies. We achieve up to four orders of magnitude better error correction performance than the GaB with a 3.4% improvement in normalized throughput performance. PGaB requires around 40% less energy than GaB as the probabilistic execution results with reducing the average iteration count by up to 62% compared to the GaB. We also show that our PGaB consistently results with an improvement in maximum operational clock rate compared to the state of the art implementations. In this dissertation, we also present a high throughput FPGA based framework to accelerate error characterization of the LDPC codes. Our flexible framework allows the end user adjust the simulation parameters and rapidly study various LDPC codes and decoders. We first show that the connection intensive bipartite graph based LDPC decoder hardware architecture creates routing stress for longer codewords that are utilized in today's communications systems and standards. We address this problem by partitioning each processing element (PE) in the bipartite graph in such a way that the inputs of a PE are evenly distributed over its partitions. This allows depopulating the Loo Up Table (LUT) resources utilized for the decoder architecture by spreading the logic across the FPGA. We show that even though LUT usage increases, critical path delay reduces with the depopulation. More importantly, with the depopulation technique an unroutable design becomes routable, which allows longer codewords to be mapped on the FPGA. We then conduct two experiments on error correction performance analysis for the GaB and PGaB algorithms, demonstrate our framework's ability to reach a resolution level that is not attainable with general purpose processor (GPP) based simulations, which reduces the time scale of simulations to 24 hours from an estimated 199 years. We finally conduct the first study on identifying all possible codewords that are not correctable by the GaB for the case where a codeword has four errors. We reduce the time scale of this simulation that requires processing 117 billion codewords to 4 hours and 38 minutes with our framework from an estimated 7800 days on a single GPP

Mixed Precision Multi-frame Parallel Low-Density Parity-Check Code Decoder

As the demand for high speed and high quality connectivity is increasing exponentially, channels are getting more and more crowded. The need for a high performance and low error floor channel decoder is apparent. Low-density parity-check code (LDPC) is a linear error correction code that can reach near Shannon limit. In this work, LDPC code construction and decoding algorithms are discussed, the LDPC decoder, in fully parallel and partial parallel, was implemented, and the features and issues related to corresponding architecture are analyzed. Furthermore, a multi-frame processing approach, based on pipelining and out-of-order processing, is proposed. The implemented decoder achieves 12.6 Gbps at 3.0 dB SNR. The mixed precision scheme is explored by adding precision control and alignment units before and after check node units (CNU) to improve performance, as well as error floor. By mixing the 6-bit and 5-bit precision CNUs at 1:1 ratio, the decoder reaches ~0.5 dB lower FER and BER while retaining a low error floor

Mixed Precision Multi-frame Parallel Low-Density Parity-Check Code Decoder

As the demand for high speed and high quality connectivity is increasing exponentially, channels are getting more and more crowded. The need for a high performance and low error floor channel decoder is apparent. Low-density parity-check code (LDPC) is a linear error correction code that can reach near Shannon limit. In this work, LDPC code construction and decoding algorithms are discussed, the LDPC decoder, in fully parallel and partial parallel, was implemented, and the features and issues related to corresponding architecture are analyzed. Furthermore, a multi-frame processing approach, based on pipelining and out-of-order processing, is proposed. The implemented decoder achieves 12.6 Gbps at 3.0 dB SNR. The mixed precision scheme is explored by adding precision control and alignment units before and after check node units (CNU) to improve performance, as well as error floor. By mixing the 6-bit and 5-bit precision CNUs at 1:1 ratio, the decoder reaches ~0.5 dB lower FER and BER while retaining a low error floor

An improvement and a fast DSP implementation of the bit flipping algorithms for low density parity check decoder

For low density parity check (LDPC) decoding, hard-decision algorithms are sometimes more suitable than the soft-decision ones. Particularly in the high throughput and high speed applications. However, there exists a considerable gap in performances between these two classes of algorithms in favor of soft-decision algorithms.  In order to reduce this gap, in this work we introduce two new improved versions of the hard-decision algorithms, the adaptative gradient descent bit-flipping (AGDBF) and adaptative reliability ratio weighted GDBF (ARRWGDBF).  An adaptative weighting and correction factor is introduced in each case to improve the performances of the two algorithms allowing an important gain of bit error rate. As a second contribution of this work a real time implementation of the proposed solutions on a digital signal processors (DSP) is performed in order to optimize and improve the performance of these new approchs. The results of numerical simulations and DSP implementation reveal a faster convergence with a low processing time and a reduction in consumed memory resources when compared to soft-decision algorithms. For the irregular LDPC code, our approachs achieves gains of 0.25 and 0.15 dB respectively for the AGDBF and ARRWGDBF algorithms

Decoding of Decode and Forward (DF) Relay Protocol using Min-Sum Based Low Density Parity Check (LDPC) System

Decoding high complexity is a major issue to design a decode and forward (DF) relay protocol. Thus, the establishment of low complexity decoding system would beneficial to assist decode and forward relay protocol. This paper reviews existing methods for the min-sum based LDPC decoding system as the low complexity decoding system. Reference lists of chosen articles were further reviewed for associated publications. This paper introduces comprehensive system model representing and describing the methods developed for LDPC based for DF relay protocol. It is consists of a number of components: (1) encoder and modulation at the source node, (2) demodulation, decoding, encoding and modulation at relay node, and (3) demodulation and decoding at the destination node. This paper also proposes a new taxonomy for min-sum based LDPC decoding techniques, highlights some of the most important components such as data used, result performances and profiles the Variable and Check Node (VCN) operation methods that have the potential to be used in DF relay protocol. Min-sum based LDPC decoding methods have the potential to provide an objective measure the best tradeoff between low complexities decoding process and the decoding error performance, and emerge as a cost-effective solution for practical application