Active microwave sensing of the atmosphere, chapter 4

The use of active microwave systems to study atmospheric phenomena is studied. Atmospheric pollution, weather prediction, climate and weather modification, weather danger and disaster warning, and atmospheric processes and interactions are covered

A model for the micro-doppler effect of the quadrupedal body motion

In radar returns from quadrupedal body motion the micro-Doppler effect is present. This effect can be used to identify and distinguish this motion from others. In this work the model for the micro-Doppler effect due to quadrupedal motion is developed from Maxwell’s equations. The common gait for all quadrupedal mammal motion is described and analyzed. The radar crossection of quadrupedal motion backscattering is discussed. Quadrupedal motion is simulated and the radar returns are analyzed. The micro-Doppler signatures are decomposed and kinematic parameters are extracte

Behind-wall target detection using micro-doppler effects

Abstract: During the last decade technology for seeing through walls and through dense vegetation has interested many researchers. This technology offers excellent opportunities for military and police applications, though applications are not limited to the military and police; they go beyond those applications to where detecting a target behind an obstacle is needed. To be able to disclose the location and velocity of obscured targets, scientists’ resort to electromagnetic wave propagation. Thus, through-the-wall radar (TWR) is technology used to propagate electromagnetic waves towards a target through a wall. Though TWR is a promising technology, it has been reported that TWR imaging (TWRI) poses a range of ambiguities in target characterisation and detection. These ambiguities are related to the thickness and electric properties of walls. It has been reported that the mechanical and electric properties of the wall defocus the target image rendered by the radar. The defocusing problem is the phenomenon of displacing the target away from its true location when the image is rendered. Thus, the operator of the TWR will have a wrong position, not the real position of the target. Defocusing is not the only problem observed while the signal is travelling through the wall. Target classification, wall modelling and others are areas that need investigation...D.Ing. (Electrical and Electronic Engineering

An introduction to radar Automatic Target Recognition (ATR) technology in ground-based radar systems

This paper presents a brief examination of Automatic Target Recognition (ATR) technology within ground-based radar systems. It offers a lucid comprehension of the ATR concept, delves into its historical milestones, and categorizes ATR methods according to different scattering regions. By incorporating ATR solutions into radar systems, this study demonstrates the expansion of radar detection ranges and the enhancement of tracking capabilities, leading to superior situational awareness. Drawing insights from the Russo-Ukrainian War, the paper highlights three pressing radar applications that urgently necessitate ATR technology: detecting stealth aircraft, countering small drones, and implementing anti-jamming measures. Anticipating the next wave of radar ATR research, the study predicts a surge in cognitive radar and machine learning (ML)-driven algorithms. These emerging methodologies aspire to confront challenges associated with system adaptation, real-time recognition, and environmental adaptability. Ultimately, ATR stands poised to revolutionize conventional radar systems, ushering in an era of 4D sensing capabilities

Airborne Doppler radar detection of low altitude windshear

As part of an integrated windshear program, the Federal Aviation Administration, jointly with NASA, is sponsoring a research effort to develop airborne sensor technology for the detection of low altitude windshear during aircraft take-off and landing. One sensor being considered is microwave Doppler radar operating at X-band or above. Using a Microburst/Clutter/Radar simulation program, a preliminary feasibility study was conducted to assess the performance of Doppler radars for this application. Preliminary results from this study are presented. Analysis show, that using bin-to-bin Automatic Gain Control (AGC), clutter filtering, limited detection range, and suitable antenna tilt management, windshear from a wet microburst can be accurately detected 10 to 65 seconds (.75 to 5 km) in front of the aircraft. Although a performance improvement can be obtained at higher frequency, the baseline X-band system that was simulated detected the presence of a windshear hazard for the dry microburst. Although this study indicates the feasibility of using an airborne Doppler radar to detect low altitude microburst windshear, further detailed studies, including future flight experiments, will be required to completely characterize the capabilities and limitations

UWB Pulse Radar for Human Imaging and Doppler Detection Applications

We were motivated to develop new technologies capable of identifying human life through walls. Our goal is to pinpoint multiple people at a time, which could pay dividends during military operations, disaster rescue efforts, or assisted-living. Such system requires the combination of two features in one platform: seeing-through wall localization and vital signs Doppler detection. Ultra-wideband (UWB) radar technology has been used due to its distinct advantages, such as ultra-low power, fine imaging resolution, good penetrating through wall characteristics, and high performance in noisy environment. Not only being widely used in imaging systems and ground penetrating detection, UWB radar also targets Doppler sensing, precise positioning and tracking, communications and measurement, and etc. A robust UWB pulse radar prototype has been developed and is presented here. The UWB pulse radar prototype integrates seeing-through imaging and Doppler detection features in one platform. Many challenges existing in implementing such a radar have been addressed extensively in this dissertation. Two Vivaldi antenna arrays have been designed and fabricated to cover 1.5-4.5 GHz and 1.5-10 GHz, respectively. A carrier-based pulse radar transceiver has been implemented to achieve a high dynamic range of 65dB. A 100 GSPS data acquisition module is prototyped using the off-the-shelf field-programmable gate array (FPGA) and analog-to-digital converter (ADC) based on a low cost solution: equivalent time sampling scheme. Ptolemy and transient simulation tools are used to accurately emulate the linear and nonlinear components in the comprehensive simulation platform, incorporated with electromagnetic theory to account for through wall effect and radar scattering. Imaging and Doppler detection examples have been given to demonstrate that such a “Biometrics-at-a-glance” would have a great impact on the security, rescuing, and biomedical applications in the future