1,972 research outputs found

    A family of asymptotically stable control laws for flexible robots based on a passivity approach

    Get PDF
    A general family of asymptotically stabilizing control laws is introduced for a class of nonlinear Hamiltonian systems. The inherent passivity property of this class of systems and the Passivity Theorem are used to show the closed-loop input/output stability which is then related to the internal state space stability through the stabilizability and detectability condition. Applications of these results include fully actuated robots, flexible joint robots, and robots with link flexibility

    Passivity/Lyapunov based controller design for trajectory tracking of flexible joint manipulators

    Get PDF
    A passivity and Lyapunov based approach for the control design for the trajectory tracking problem of flexible joint robots is presented. The basic structure of the proposed controller is the sum of a model-based feedforward and a model-independent feedback. Feedforward selection and solution is analyzed for a general model for flexible joints, and for more specific and practical model structures. Passivity theory is used to design a motor state-based controller in order to input-output stabilize the error system formed by the feedforward. Observability conditions for asymptotic stability are stated and verified. In order to accommodate for modeling uncertainties and to allow for the implementation of a simplified feedforward compensation, the stability of the system is analyzed in presence of approximations in the feedforward by using a Lyapunov based robustness analysis. It is shown that under certain conditions, e.g., the desired trajectory is varying slowly enough, stability is maintained for various approximations of a canonical feedforward

    Self-motion control of kinematically redundant robot manipulators

    Get PDF
    Thesis (Master)--Izmir Institute of Technology, Mechanical Engineering, Izmir, 2012Includes bibliographical references (leaves: 88-92)Text in English; Abstract: Turkish and Englishxvi,92 leavesRedundancy in general provides space for optimization in robotics. Redundancy can be defined as sensor/actuator redundancy or kinematic redundancy. The redundancy considered in this thesis is the kinematic redundancy where the total degrees-of-freedom of the robot is more than the total degrees-of-freedom required for the task to be executed. This provides infinite number of solutions to perform the same task, thus, various subtasks can be carried out during the main-task execution. This work utilizes the property of self-motion for kinematically redundant robot manipulators by designing the general subtask controller that controls the joint motion in the null-space of the Jacobian matrix. The general subtask controller is implemented for various subtasks in this thesis. Minimizing the total joint motion, singularity avoidance, posture optimization for static impact force objectives, which include maximizing/minimizing the static impact force magnitude, and static and moving obstacle (point to point) collision avoidance are the subtasks considered in this thesis. New control architecture is developed to accomplish both the main-task and the previously mentioned subtasks. In this architecture, objective function for each subtask is formed. Then, the gradient of the objective function is used in the subtask controller to execute subtask objective while tracking a given end-effector trajectory. The tracking of the end-effector is called main-task. The SCHUNK LWA4-Arm robot arm with seven degrees-of-freedom is developed first in SolidWorks® as a computer-aided-design (CAD) model. Then, the CAD model is converted to MATLAB® Simulink model using SimMechanics CAD translator to be used in the simulation tests of the controller. Kinematics and dynamics equations of the robot are derived to be used in the controllers. Simulation test results are presented for the kinematically redundant robot manipulator operating in 3D space carrying out the main-task and the selected subtasks for this study. The simulation test results indicate that the developed controller’s performance is successful for all the main-task and subtask objectives

    Output-feedback adaptive control for the global regulation of robot manipulators with bounded inputs

    Get PDF
    "In this paper, an output-feedback adaptive scheme for the global position stabilization of robot manipulators with bounded inputs is proposed. Compared to the previous output-feedback adaptive approaches developed in a bounded-input context, the proposed free-of-velocity feedback controller guarantees the adaptive regulation objective: globally, avoiding discontinuities throughout the scheme, preventing the inputs to reach their natural saturation bounds, and imposing no saturation-avoidance restriction on the control gains. Moreover, the developed scheme is not restricted to the use of a specific saturation function to achieve the required boundedness, but may involve any one within a set of smooth and non-smooth (Lipschitz-continuous) bounded passive functions that include the hyperbolic tangent and the conventional saturation as particular cases. Experimental results corroborate the efficiency of the proposed scheme.

    Performance Investigations of an Improved Backstepping Operational space Position Tracking Control of a Mobile Manipulator

    Get PDF
    This article implies an improved backstepping control technique for the operational-space position tracking of a kinematically redundant mobile manipulator. The mobile manipulator thought-out for the analysis has a vehicle base with four mecanum wheels and a serial manipulator arm with three rotary actuated joints. The recommended motion controller provides a safeguard against the system dynamic variations owing to the parameter uncertainties, unmodelled system dynamics and unknown exterior disturbances. The Lyapunov’s direct method assists in designing and authenticating the system’s closed-loop stability and tracking ability of the suggested control strategy. The feasibility, effectiveness and robustness of the recommended controller are demonstrated and investigated numerically with the help of computer based simulations. The mathematical model used for the computer-based simulations is derived based on a real-time mobile manipulator and the derived model is further verified with an inbuilt gazebo model in a robot operating system (ROS) environment. In addition, the proposed scheme is verified on an in-house fabricated mobile manipulator system. Further, the recommended controller performance is correlated with the conventional backstepping control design in both computer-based simulations and in real-time experiments

    Adaptive tracking control of Euler-Lagrange systems with bounded controls

    Get PDF
    "We solve the simultaneous closed?loop identification and tracking?control problems for fully actuated Euler-Lagrange systems under input constraints. We use a nonlinear adaptive controller reminiscent of computed?torque?type controllers in which linear correction terms are saturated in order to comply with the imposed bounds on the control inputs. Adaptation, reminiscent of gradient methods, is used also with saturation. With respect to related literature, our contribution consists in establishing uniform global asymptotic stability. Therefore, our control scheme ensures robustness with respect to bounded perturbations and uniform convergence of the estimation errors for any initial conditions.

    Adaptive computed reference computed torque control of flexible manipulators

    Get PDF
    • …
    corecore