3,251 research outputs found
A DHCP-based IP address autoconfiguration for MANETs
Mobile Ad hoc Networks (MANETs) are expected to become more
and more important in the upcoming years, playing a significant role in 4G networks.
In order to enable the deployment of IP services in such networks, IP
address autoconfiguration mechanisms are required. Although the ad hoc topic
has been a very intense research area, with a plethora of published papers about
routing, there is a lack of proposals of address autoconfiguration with enough
support from the technical community. This paper presents a mechanism suited
for MANETs connected to the Internet, reusing existing and widely deployed address
autoconfiguration protocols, such as DHCPv6 and Router Advertisements
Adoption of vehicular ad hoc networking protocols by networked robots
This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan
On the Experimental Evaluation of Vehicular Networks: Issues, Requirements and Methodology Applied to a Real Use Case
One of the most challenging fields in vehicular communications has been the
experimental assessment of protocols and novel technologies. Researchers
usually tend to simulate vehicular scenarios and/or partially validate new
contributions in the area by using constrained testbeds and carrying out minor
tests. In this line, the present work reviews the issues that pioneers in the
area of vehicular communications and, in general, in telematics, have to deal
with if they want to perform a good evaluation campaign by real testing. The
key needs for a good experimental evaluation is the use of proper software
tools for gathering testing data, post-processing and generating relevant
figures of merit and, finally, properly showing the most important results. For
this reason, a key contribution of this paper is the presentation of an
evaluation environment called AnaVANET, which covers the previous needs. By
using this tool and presenting a reference case of study, a generic testing
methodology is described and applied. This way, the usage of the IPv6 protocol
over a vehicle-to-vehicle routing protocol, and supporting IETF-based network
mobility, is tested at the same time the main features of the AnaVANET system
are presented. This work contributes in laying the foundations for a proper
experimental evaluation of vehicular networks and will be useful for many
researchers in the area.Comment: in EAI Endorsed Transactions on Industrial Networks and Intelligent
Systems, 201
A survey on subjecting electronic product code and non-ID objects to IP identification
Over the last decade, both research on the Internet of Things (IoT) and
real-world IoT applications have grown exponentially. The IoT provides us with
smarter cities, intelligent homes, and generally more comfortable lives.
However, the introduction of these devices has led to several new challenges
that must be addressed. One of the critical challenges facing interacting with
IoT devices is to address billions of devices (things) around the world,
including computers, tablets, smartphones, wearable devices, sensors, and
embedded computers, and so on. This article provides a survey on subjecting
Electronic Product Code and non-ID objects to IP identification for IoT
devices, including their advantages and disadvantages thereof. Different
metrics are here proposed and used for evaluating these methods. In particular,
the main methods are evaluated in terms of their: (i) computational overhead,
(ii) scalability, (iii) adaptability, (iv) implementation cost, and (v) whether
applicable to already ID-based objects and presented in tabular format.
Finally, the article proves that this field of research will still be ongoing,
but any new technique must favorably offer the mentioned five evaluative
parameters.Comment: 112 references, 8 figures, 6 tables, Journal of Engineering Reports,
Wiley, 2020 (Open Access
Supporting Cyber-Physical Systems with Wireless Sensor Networks: An Outlook of Software and Services
Sensing, communication, computation and control technologies are the essential building blocks of a cyber-physical system (CPS). Wireless sensor networks (WSNs) are a way to support CPS as they provide fine-grained spatial-temporal sensing, communication and computation at a low premium of cost and power. In this article, we explore the fundamental concepts guiding the design and implementation of WSNs. We report the latest developments in WSN software and services for meeting existing requirements and newer demands; particularly in the areas of: operating system, simulator and emulator, programming abstraction, virtualization, IP-based communication and security, time and location, and network monitoring and management. We also reflect on the ongoing
efforts in providing dependable assurances for WSN-driven CPS. Finally, we report on its applicability with a case-study on smart buildings
A BLE-based multi-gateway network infrastructure with handover support for mobile BLE peripherals
Bluetooth Low Energy (BLE) is a popular technology within the Internet of Things. It allows low-power, star networks to be set up between a BLE gateway and multiple, power-constrained BLE devices. However, these networks tend to be static, not supporting BLE devices that can freely move around in an environment of multiple interconnected BLE gateways and perform handovers whenever necessary. This work proposes two alternative network architectures for mobile BLE peripherals. One leverages on IPv6 over BLE, whereas the other combines default BLE mechanisms with an additional custom controller. On top, we study in detail the handover mechanism that must be present in both architectures and compare the performance of both a passive and active handover approach. The passive handover approach can be set up without any extra implementation, but an active handover approach offers more proactive handover decisions and can provide a much lower handover latency. All proposed solutions have been implemented and validated on real hardware, showing the feasibility of having future infrastructures with support for mobile BLE devices
- …