Airborne photogrammetry and LIDAR for DSM extraction and 3D change detection over an urban area : a comparative study

A digital surface model (DSM) extracted from stereoscopic aerial images, acquired in March 2000, is compared with a DSM derived from airborne light detection and ranging (lidar) data collected in July 2009. Three densely built-up study areas in the city centre of Ghent, Belgium, are selected, each covering approximately 0.4 km(2). The surface models, generated from the two different 3D acquisition methods, are compared qualitatively and quantitatively as to what extent they are suitable in modelling an urban environment, in particular for the 3D reconstruction of buildings. Then the data sets, which are acquired at two different epochs t(1) and t(2), are investigated as to what extent 3D (building) changes can be detected and modelled over the time interval. A difference model, generated by pixel-wise subtracting of both DSMs, indicates changes in elevation. Filters are proposed to differentiate 'real' building changes from false alarms provoked by model noise, outliers, vegetation, etc. A final 3D building change model maps all destructed and newly constructed buildings within the time interval t(2) - t(1). Based on the change model, the surface and volume of the building changes can be quantified

"Last-Mile" preparation for a potential disaster

Extreme natural events, like e.g. tsunamis or earthquakes, regularly lead to catastrophes with dramatic consequences. In recent years natural disasters caused hundreds of thousands of deaths, destruction of infrastructure, disruption of economic activity and loss of billions of dollars worth of property and thus revealed considerable deficits hindering their effective management: Needs for stakeholders, decision-makers as well as for persons concerned include systematic risk identification and evaluation, a way to assess countermeasures, awareness raising and decision support systems to be employed before, during and after crisis situations. The overall goal of this study focuses on interdisciplinary integration of various scientific disciplines to contribute to a tsunami early warning information system. In comparison to most studies our focus is on high-end geometric and thematic analysis to meet the requirements of small-scale, heterogeneous and complex coastal urban systems. Data, methods and results from engineering, remote sensing and social sciences are interlinked and provide comprehensive information for disaster risk assessment, management and reduction. In detail, we combine inundation modeling, urban morphology analysis, population assessment, socio-economic analysis of the population and evacuation modeling. The interdisciplinary results eventually lead to recommendations for mitigation strategies in the fields of spatial planning or coping capacity

Training of Crisis Mappers and Map Production from Multi-sensor Data: Vernazza Case Study (Cinque Terre National Park, Italy)

This aim of paper is to presents the development of a multidisciplinary project carried out by the cooperation between Politecnico di Torino and ITHACA (Information Technology for Humanitarian Assistance, Cooperation and Action). The goal of the project was the training in geospatial data acquiring and processing for students attending Architecture and Engineering Courses, in order to start up a team of "volunteer mappers". Indeed, the project is aimed to document the environmental and built heritage subject to disaster; the purpose is to improve the capabilities of the actors involved in the activities connected in geospatial data collection, integration and sharing. The proposed area for testing the training activities is the Cinque Terre National Park, registered in the World Heritage List since 1997. The area was affected by flood on the 25th of October 2011. According to other international experiences, the group is expected to be active after emergencies in order to upgrade maps, using data acquired by typical geomatic methods and techniques such as terrestrial and aerial Lidar, close-range and aerial photogrammetry, topographic and GNSS instruments etc.; or by non conventional systems and instruments such us UAV, mobile mapping etc. The ultimate goal is to implement a WebGIS platform to share all the data collected with local authorities and the Civil Protectio

Developing a three-dimensional city modeling with the absence of elevation data

The past few decades have witnessed steady innovations in remote sensing technologies; however, elevation data needed for creating 3D city models are not reachable for several regions in all over the world. Many developed states still without proper nationwide elevation measurements dataset for developing sufficient 3D city models. The current paper addresses the possibility of producing 3D models for areas without elevation data but with footprints, measurements collected from government departments and volunteered individuals. The study aims to investigate and evaluate a different approach to create three-dimensional city models based on data that existed in open-source maps when elevation measurements are not available. The proposed approach can be divided into two stages: footprint and shadow data collection, and height estimation. At first, the footprint information and shadow area are manually gathered from satellite images, then the building height is predicted based on rooftop and shadow data. SketchUp, a 3D design software, is employed as an efficient tool for creating the 3D virtual city model. To develop such a model, the software utilizes procedural modeling in addition to an image-based approach. The developed model can produce a satisfactory and realistic virtual scene within a short time and for a large area. The 3D city modeling resulted from estimated heights is considered as a rational provisional solution at areas where elevation data are not available or are out-dated

Seafloor characterization using airborne hyperspectral co-registration procedures independent from attitude and positioning sensors

The advance of remote-sensing technology and data-storage capabilities has progressed in the last decade to commercial multi-sensor data collection. There is a constant need to characterize, quantify and monitor the coastal areas for habitat research and coastal management. In this paper, we present work on seafloor characterization that uses hyperspectral imagery (HSI). The HSI data allows the operator to extend seafloor characterization from multibeam backscatter towards land and thus creates a seamless ocean-to-land characterization of the littoral zone

Mass-Market Receiver for Static Positioning: Tests and Statistical Analyses

Nowadays, there are several low cost GPS receivers able to provide both pseudorange and carrier phase measurements in the L1band, that allow to have good realtime performances in outdoor condition. The present paper describes a set of dedicated tests in order to evaluate the positioning accuracy in static conditions. The quality of the pseudorange and the carrier phase measurements let hope for interesting results. The use of such kind of receiver could be extended to a large number of professional applications, like engineering fields: survey, georeferencing, monitoring, cadastral mapping and cadastral road. In this work, the receivers performance is verified considering a single frequency solution trying to fix the phase ambiguity, when possible. Different solutions are defined: code, float and fix solutions. In order to solve the phase ambiguities different methods are considered. Each test performed is statistically analyzed, highlighting the effects of different factors on precision and accurac

Can a Laplace PDE Define Air Corridors through Low-Altitude Airspace?

This paper develops a high-density air corridor traffic flow model for Uncrewed Aircraft System (UAS) operation in urban low altitude airspace. To maximize throughput with safe separation guarantees, we define an airspace spatiotemporal planning problem. For the spatial planning, we propose a multi-floor UAS coordination structure divided into a finite number of air corridors safely wrapping buildings and obstacles. We use the USGS Lidar data to map buildings and in turn generate air corridors by modeling UAS coordination as ideal fluid flow with the streamlines obtained by solving the Laplace partial differential equation (PDE). Proper boundary conditions for the differential equations are imposed to direct air corridors along the floors desired motion direction. For temporal planning, we use 4-dimensional path-finding through the corridor network with A* search to maximize airspace usability given each UAS initial and destination waypoint pair

Developing Guidelines for Two-Dimensional Model Review and Acceptance

Two independent modelers ran two hydraulic models, SRH-2D and HEC-RAS 2D. The models were applied to the Lakina River (MP 44 McCarthy Road) and to Quartz Creek (MP 0.7 Quartz Creek Road), which approximately represent straight and bend flow conditions, respectively. We compared the results, including water depth, depth averaged velocity, and bed shear stress, from the two models for both modelers. We found that the extent and density of survey data were insufficient for Quartz Creek. Neither model was calibrated due to the lack of basic field data (i.e., discharge, water surface elevation, and sediment characteristics). Consequently, we were unable to draw any conclusion about the accuracy of the models. Concerning the time step and the equations used (simplified or full) to solve the momentum equation in the HEC-RAS 2D model, we found that the minimum time step allowed by the model must be used if the diffusion wave equation is used in the simulations. A greater time step can be used if the full momentum equation is used in the simulations. We developed a set of guidelines for reviewing model results, and developed and provided a two-day training workshop on the two models for ADOT&PF hydraulic engineers