Inductively Coupled CMOS Power Receiver For Embedded Microsensors

Inductively coupled power transfer can extend the lifetime of embedded microsensors that save costs, energy, and lives. To expand the microsensors' functionality, the transferred power needs to be maximized. Plus, the power receiver needs to handle wide coupling variations in real applications. Therefore, the objective of this research is to design a power receiver that outputs the highest power for the widest coupling range. This research proposes a switched resonant half-bridge power stage that adjusts both energy transfer frequency and duration so the output power is maximally high. A maximum power point (MPP) theory is also developed to predict the optimal settings of the power stage with 98.6% accuracy. Finally, this research addresses the system integration challenges such as synchronization and over-voltage protection. The fabricated self-synchronized prototype outputs up to 89% of the available power across 0.067%~7.9% coupling range. The output power (in percentage of available power) and coupling range are 1.3× and 13× higher than the comparable state of the arts.Ph.D

Techniques, Circuits and Devices for Noncontact Sensing through Wireless Coupling

Le tecnologie per la misurazione di grandezze fisiche senza contatto sono diventate sempre più centrali in vari settori, che vanno dal monitoraggio industriale alle applicazioni sanitarie. In questo contesto, la tesi si concentra sullo sviluppo e l'implementazione di tecniche innovative, circuiti elettronici e dispositivi per la rilevazione senza contatto. L’analisi presentata all'interno di questa tesi considera lo scenario del rilevamento senza contatto a distanza nel campo elettromagnetico lontano (far-field) e al rilevamento senza contatto di prossimità, sfruttando le interazioni elettromagnetiche in campo vicino (near field). Nell’ambito del rilevamento senza contatto a distanza, la tesi indaga l'uso delle onde elettromagnetiche per il monitoraggio non invasivo del livello di solidi granulari all’interno di silos. Questo sistema, sviluppato impiegando un sensore radar commerciale a onda continua modulata in frequenza, dimostra il potenziale di questa tecnologia nel monitoraggio non invasivo e senza contatto in contesti agricoli e industriali. Considerando invece lo scenario del rilevamento senza contatto di prossimità, la tesi fornisce un'analisi dell'interrogazione senza contatto di sensori passivi e ne presenta diversi approcci e applicazioni. Vengono affrontate le problematiche delle misurazioni senza contatto, proponendo alcune soluzioni per migliorarne l'affidabilità e l'accuratezza, permettendo in particolare di renderle indipendenti dalla distanza di interrogazione. In particolare, la tesi presenta un sistema per la misurazione senza contatto della frequenza di risonanza di risonatori MEMS piezoelettrici. La tecnica proposta sfrutta l'accoppiamento magnetico tra un’unità di interrogazione ed un’unità sensore ed è applicata in modo innovativo per la rilevazione della temperatura, sfruttando le proprietà dei risonatori a disco in nitruro di alluminio (AlN) su silicio sottile piezoelettrico (TPoS) ed una tecnica di interrogazione senza contatto a tempo commutato. Inoltre, la tesi presenta un’etichetta flessibile per la misurazione della temperatura corporea, che combina il rilevamento a contatto della temperatura con una lettura senza contatto dell’unità sensore sfruttandone l'accoppiamento magnetico con un unità di interrogazione. L’etichetta flessibile, che costituisce l'unità sensore, è composta da una bobina induttiva che consente l'accoppiamento magnetico, un condensatore ceramico utilizzato come elemento sensibile alla temperatura, sfruttandone il coefficiente di temperatura della capacità, ed un induttore aggiuntivo utilizzato per rendere la frequenza di risonanza del circuito risonante RLC indipendente dalla flessione dell’etichetta. In modo analogo, le tecniche di interrogazione proposte sono state applicate ad un nuovo metodo per l'interrogazione senza contatto di un sensore induttivo, utilizzato per rilevare target conduttivi. Il sistema proposto presenta una bobina avvolta collegata con un condensatore per formare un circuito LC risonante, la cui frequenza di risonanza cambia quando un target conduttivo viene introdotto nel campo magnetico generato dalla bobina stessa. Attraverso una bobina di interrogazione esterna, accoppiata elettromagneticamente al sensore induttivo, è possibile interrogare senza contatto il sensore induttivo, permettendo quindi la rilevazione a distanza di target conduttivi. Infine, lo studio esposto in questa tesi introduce una tecnica avanzata per l'interrogazione senza contatto di sensori resistivi passivi, sfruttando risonatori a cristallo di quarzo come dispositivo risonante e basandosi sulla stima del fattore di qualità del circuito che costituisce l’unità sensore. Il metodo proposto supera i limiti delle tecniche basate su misure di ampiezza, legati in particolare all'influenza della distanza di interrogazioneNoncontact sensing technologies have become increasingly central in a variety of fields, ranging from industrial monitoring to healthcare applications. In this context, the thesis focuses on the development and implementation of innovative techniques, electronic circuits, and devices for contactless sensing via wireless coupling, responding to the growing interest in noncontact measurement methods. The themes treated in this thesis regard both the scenario of distant noncontact sensing in the electromagnetic far field, and proximate wireless sensing, leveraging on near-field electromagnetic interactions. Each domain is distinctly characterized by its specific technologies, applications, and methodologies, reflecting their operational ranges and fundamental principles. In the domain of distant wireless sensing, the thesis investigates the use of electromagnetic waves for unobtrusive level monitoring of granular solids in silos. This system, developed employing a commercial frequency-modulated continuous-wave radar sensor, demonstrates the potential of this technology in unobtrusive monitoring in agricultural and industrial environments. Considering the proximate wireless sensing domain, the thesis provides an analysis of noncontact interrogation of passive sensors and it presents different approaches and applications. It addresses the challenges and offers solutions for enhancing the reliability and accuracy of contactless measurements, which can be advantageously independent of the interrogation distance. This can path the way to the development of low-cost, disposable and sustainable devices for healthcare and industrial applications. In particular, the thesis presents a system for the noncontact measurement of the resonant frequency of piezoelectric MEMS resonators. The technique exploits magnetic coupling between interrogation and sensor units, and it is innovatively applied for temperature sensing exploiting a thin-film piezoelectric on silicon (TPoS) aluminium nitride (AlN) disk resonators and a contactless interrogation time-gated technique. Furthermore, the thesis presents a flexible patch for body temperature measurement, combining contact sensing with contactless readout, and exploiting magnetic coupling between interrogation and sensor units. The flexible patch, forming the sensor unit, is composed of an inductive coil for magnetic coupling, a ceramic capacitor used as the temperature sensing element exploiting its temperature coefficient of capacitance and an additional inductor to make the resonant frequency of the resulting resonant RLC circuit independent from the bending of the patch. Similarly, interrogation techniques have been applied to a novel method for contactless interrogation of an inductive sensor used for detecting conductive targets. The system features a solenoidal coil connected with a capacitor to form a resonating LC circuit, whose resonant frequency changes when a conductive target is introduced in the generated magnetic field. An external interrogation coil electromagnetically coupled to the inductive sensor enables the wireless measurement for conductive target detection. Lastly, the study introduces an advanced technique for the contactless interrogation of passive resistive sensors. The novel approach exploits the resonant frequency stability and the high quality factor of a quartz crystal resonator, used as a resonant element, with a series-connected resistor acting as the sensing element. This method overcomes the limitations of amplitude measurements techniques typically affected by the interrogation distance

SQUIDs in biomagnetism : A roadmap towards improved healthcare

This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 686865.Peer reviewedPublisher PD

Space resources. Volume 2: Energy, power, and transport

This volume of the Space Resources report covers a number of technical and policy issues concerning the energy and power to carry out advanced space missions and the means of transportation to get to the sites of those missions. Discussed in the first half of this volume are the technologies which might be used to provide power and a variety of ways to convert power from one form to another, store it, move it wherever it is needed, and use it. In the second half of this volume, various kinds of transportation, including both interplanetary and surface systems, are discussed

On-chip adaptive power management for WPT-Enabled IoT

Internet of Things (IoT), as broadband network connecting every physical objects, is becoming more widely available in various industrial, medical, home and automotive applications. In such network, the physical devices, vehicles, medical assistance, and home appliances among others are supposed to be embedded by sensors, actuators, radio frequency (RF) antennas, memory, and microprocessors, such that these devices are able to exchange data and connect with other devices in the network. Among other IoT’s pillars, wireless sensor network (WSN) is one of the main parts comprising massive clusters of spatially distributed sensor nodes dedicated for sensing and monitoring environmental conditions. The lifetime of a WSN is greatly dependent on the lifetime of the small sensor nodes, which, in turn, is primarily dependent on energy availability within every sensor node. Predominantly, the main energy source for a sensor node is supplied by a small battery attached to it. In a large WSN with massive number of deployed sensor nodes, it becomes a challenge to replace the batteries of every single sensor node especially for sensor nodes deployed in harsh environments. Consequently, powering the sensor nodes becomes a key limiting issue, which poses important challenges for their practicality and cost. Therefore, in this thesis we propose enabling WSN, as the main pillar of IoT, by means of resonant inductive coupling (RIC) wireless power transfer (WPT). In order to enable efficient energy delivery at higher range, high quality factor RIC-WPT system is required in order to boost the magnetic flux generated at the transmitting coil. However, an adaptive front-end is essential for self-tuning the resonant tank against any mismatch in the components values, distance variation, and interference from close metallic objects. Consequently, the purpose of the thesis is to develop and design an adaptive efficient switch-mode front-end for self-tuning in WPT receivers in multiple receiver system. The thesis start by giving background about the IoT system and the technical bottleneck followed by the problem statement and thesis scope. Then, Chapter 2 provides detailed backgrounds about the RIC-WPT system. Specifically, Chapter 2 analyzes the characteristics of different compensation topologies in RIC-WPT followed by the implications of mistuning on efficiency and power transfer capability. Chapter 3 discusses the concept of switch-mode gyrators as a potential candidate for generic variable reactive element synthesis while different potential applications and design cases are provided. Chapter 4 proposes two different self-tuning control for WPT receivers that utilize switch-mode gyrators as variable reactive element synthesis. The performance aspects of control approaches are discussed and evaluated as well in Chapter 4. The development and exploration of more compact front-end for self-tuned WPT receiver is investigated in Chapter 5 by proposing a phase-controlled switched inductor converter. The operation and design details of different switch-mode phase-controlled topologies are given and evaluated in the same chapter. Finally, Chapter 6 provides the conclusions and highlight the contribution of the thesis, in addition to suggesting the related future research topics.Internet de las cosas (IoT), como red de banda ancha que interconecta cualquier cosa, se está estableciendo como una tecnología valiosa en varias aplicaciones industriales, médicas, domóticas y en el sector del automóvil. En dicha red, los dispositivos físicos, los vehículos, los sistemas de asistencia médica y los electrodomésticos, entre otros, incluyen sensores, actuadores, subsistemas de comunicación, memoria y microprocesadores, de modo que son capaces de intercambiar datos e interconectarse con otros elementos de la red. Entre otros pilares que posibilitan IoT, la red de sensores inalámbricos (WSN), que es una de las partes cruciales del sistema, está formada por un conjunto masivo de nodos de sensado distribuidos espacialmente, y dedicados a sensar y monitorizar las condiciones del contexto de las cosas interconectadas. El tiempo de vida útil de una red WSN depende estrechamente del tiempo de vida de los pequeños nodos sensores, los cuales, a su vez, dependen primordialmente de la disponibilidad de energía en cada nodo sensor. La fuente principal de energía para un nodo sensor suele ser una pequeña batería integrada en él. En una red WSN con muchos nodos y con una alta densidad, es un desafío el reemplazar las baterías de cada nodo sensor, especialmente en entornos hostiles, como puedan ser en escenarios de Industria 4.0. En consecuencia, la alimentación de los nodos sensores constituye uno de los cuellos de botella que limitan un despliegue masivo práctico y de bajo coste. A tenor de estas circunstancias, en esta tesis doctoral se propone habilitar las redes WSN, como pilar principal de sistemas IoT, mediante sistemas de transferencia inalámbrica de energía (WPT) basados en acoplamiento inductivo resonante (RIC). Con objeto de posibilitar el suministro eficiente de energía a mayores distancias, deben aumentarse los factores de calidad de los elementos inductivos resonantes del sistema RIC-WPT, especialmente con el propósito de aumentar el flujo magnético generado por el inductor transmisor de energía y su acoplamiento resonante en recepción. Sin embargo, dotar al cabezal electrónico que gestiona y condicionada el flujo de energía de capacidad adaptativa es esencial para conseguir la autosintonía automática del sistema acoplado y resonante RIC-WPT, que es muy propenso a la desintonía ante desajustes en los parámetros nominales de los componentes, variaciones de distancia entre transmisor y receptores, así como debido a la interferencia de objetos metálicos. Es por tanto el objetivo central de esta tesis doctoral el concebir, proponer, diseñar y validar un sistema de WPT para múltiples receptores que incluya funciones adaptativas de autosintonía mediante circuitos conmutados de alto rendimiento energético, y susceptible de ser integrado en un chip para el condicionamiento de energía en cada receptor de forma miniaturizada y desplegable de forma masiva. La tesis empieza proporcionando una revisión del estado del arte en sistemas de IoT destacando el reto tecnológico de la alimentación energética de los nodos sensores distribuidos y planteando así el foco de la tesis doctoral. El capítulo 2 sigue con una revisión crítica del statu quo de los sistemas de transferencia inalámbrica de energía RIC-WPT. Específicamente, el capítulo 2 analiza las características de diferentes estructuras circuitales de compensación en RIC-WPT seguido de una descripción crítica de las implicaciones de la desintonía en la eficiencia y la capacidad de transferencia energética del sistema. El capítulo 3 propone y explora el concepto de utilizar circuitos conmutados con función de girador como potenciales candidatos para la síntesis de propósito general de elementos reactivos variables sintonizables electrónicamente, incluyendo varias aplicaciones y casos de uso. El capítulo 4 propone dos alternativas para métodos y circuitos de control para la autosintonía de receptores de energíaPostprint (published version

A Novel Power-Efficient Wireless Multi-channel Recording System for the Telemonitoring of Electroencephalography (EEG)

This research introduces the development of a novel EEG recording system that is modular, batteryless, and wireless (untethered) with the supporting theoretical foundation in wireless communications and related design elements and circuitry. Its modular construct overcomes the EEG scaling problem and makes it easier for reconfiguring the hardware design in terms of the number and placement of electrodes and type of standard EEG system contemplated for use. In this development, portability, lightweight, and applicability to other clinical applications that rely on EEG data are sought. Due to printer tolerance, the 3D printed cap consists of 61 electrode placements. This recording capacity can however extend from 21 (as in the international 10-20 systems) up to 61 EEG channels at sample rates ranging from 250 to 1000 Hz and the transfer of the raw EEG signal using a standard allocated frequency as a data carrier. The main objectives of this dissertation are to (1) eliminate the need for heavy mounted batteries, (2) overcome the requirement for bulky power systems, and (3) avoid the use of data cables to untether the EEG system from the subject for a more practical and less restrictive setting. Unpredictability and temporal variations of the EEG input make developing a battery-free and cable-free EEG reading device challenging. Professional high-quality and high-resolution analog front ends are required to capture non-stationary EEG signals at microvolt levels. The primary components of the proposed setup are the wireless power transmission unit, which consists of a power amplifier, highly efficient resonant-inductive link, rectification, regulation, and power management units, as well as the analog front end, which consists of an analog to digital converter, pre-amplification unit, filtering unit, host microprocessor, and the wireless communication unit. These must all be compatible with the rest of the system and must use the least amount of power possible while minimizing the presence of noise and the attenuation of the recorded signal A highly efficient resonant-inductive coupling link is developed to decrease power transmission dissipation. Magnetized materials were utilized to steer electromagnetic flux and decrease route and medium loss while transmitting the required energy with low dissipation. Signal pre-amplification is handled by the front-end active electrodes. Standard bio-amplifier design approaches are combined to accomplish this purpose, and a thorough investigation of the optimum ADC, microcontroller, and transceiver units has been carried out. We can minimize overall system weight and power consumption by employing battery-less and cable-free EEG readout system designs, consequently giving patients more comfort and freedom of movement. Similarly, the solutions are designed to match the performance of medical-grade equipment. The captured electrical impulses using the proposed setup can be stored for various uses, including classification, prediction, 3D source localization, and for monitoring and diagnosing different brain disorders. All the proposed designs and supporting mathematical derivations were validated through empirical and software-simulated experiments. Many of the proposed designs, including the 3D head cap, the wireless power transmission unit, and the pre-amplification unit, are already fabricated, and the schematic circuits and simulation results were based on Spice, Altium, and high-frequency structure simulator (HFSS) software. The fully integrated head cap to be fabricated would require embedding the active electrodes into the 3D headset and applying current technological advances to miniaturize some of the design elements developed in this dissertation

Development of a compact wireless SAW Pirani vacuum microsensor with extended range and sensitivity

Vakuumsensoren haben nach wie vor einen begrenzten Messbereich und erfordern eine aufwendige Verkabelung sowie eine komplexe Integration in Vakuumkammern. Ein kompakter Sensor, der in der Lage ist, den Erfassungsbereich zwischen Hochvakuum und Atmosphärendruck zu erweitern und dabei drahtlos zu arbeiten, ist äußerst wünschenswert. Der Schwerpunkt dieser Arbeit liegt auf dem Entwurf, der Simulation, der Herstellung und der experimentellen Validierung eines drahtlosen kompakten Vakuum-Mikrosensors mit erweiterter Reichweite und Empfindlichkeit. Zunächst wurde ein neuer Sensor unter Verwendung vorhandener und neu entwickelter Komponenten entworfen. Zweitens wurden die Sensorkomponenten simuliert, um ihre Parameter zu optimieren. Drittens wurde ein Prototyp unter Verwendung der verfügbaren Mikrobearbeitungs- und Halbleitertechnologien hergestellt und montiert. Viertens wurde der Prototyp unter Umgebungs- und Vakuumbedingungen charakterisiert, um seine Leistungen zu validieren. Für das Wandlerprinzip wurden zwei Techniken kombiniert, nämlich Pirani-Sensorik und akustische Oberflächenwellen. Das Design der Sensorkomponenten bestand aus vier Einheiten: Sensoreinheit, Heizeinheit, Abfrageeinheit und Gehäuse. Alle Einheiten wurden in einen kompakten Würfel eingebaut. Einige Komponenten wurden neu entwickelt, während andere gekauft, modifiziert und dann miteinander verbunden wurden. Die Sensoreinheit besteht aus einem neuen Chip mit verbesserter Sensorleistung dank eines optimierten Verhältnisses von Oberfläche zu Volumen. Die Heizeinheit wurde aus zwei induktiv gekoppelten Spulen und der zugehörigen Konditionierungselektronik zusammengesetzt. Die Abfrageeinheit wurde mit einer Mikro-Patch-Antenne hergestellt. Ein würfelförmiges Polymergehäuse wurde entwickelt, um alle Komponenten in einer Vakuumkammer unterzubringen. Zweitens wurde die Simulation des Verhaltens der Sensorkomponenten behandelt. Die für die Druckmessung verantwortliche Wärmeübertragung des Sensorchips wurde vom Hochvakuum bis zum Atmosphärendruck untersucht, um seine Abmessungen zu optimieren. Die Verwendung eines hängenden Lithium-Niobat-Chips mit Y-Z-Schnitt und einem TCF von 94 ppm/K führte zu einer verbesserten Leistung in einem Messbereich zwischen \num{d-4}~Pa und \num{e5}~Pa. Die elektronische Kopplung der Heizspulen wurde ebenfalls simuliert, um die Leistungsübertragung und den Kopplungsabstand zu optimieren. Der dritte Teil betrifft die Herstellungs- und Montageschritte des Prototyps unter Verwendung der verfügbaren Halbleitertechnologien und -ausrüstung. Ein SAW Chip wurde mit einer 100~nm dicken Goldschicht an der Unterseite gesputtert, um den Heizwiderstand zu bilden, und mit Hilfe von Drahtbonding elektrisch mit dem Rest des Sensors verbunden. Es wurde eine Leiterplatte vorbereitet, die die Heiz- und Sensoreinheit enthält. Ein kubisches Gehäusewurde aus PTFE hergestellt. Viertens wurden die Sensorkomponenten zunächst separat charakterisiert, um ihre Leistungen zu überprüfen, und dann zusammen unter Umgebungsbedingungen. Später wurde der Sensor im Vakuum integriert, und es wurde ein druckabhängiges Verhalten des Sensorchips beobachtet. Die Relevanz eines drahtlosen Übertragungsverfahrens wurde den herkömmlichen drahtgebundenen Methoden gegenübergestellt. Die Ergebnisse der experimentellen Arbeiten außerhalb und innerhalb des Vakuums zeigten die Machbarkeit und Relevanz des neuen Konzepts

Development of a metallic magnetic calorimeter with integrated SQUID readout

This thesis describes the development of a high-resolution soft X-ray detector based on metallic magnetic calorimeters (MMCs). MMCs are cryogenic, energy dispersive particle detectors which consist of a particle absorber that is thermally coupled to a paramagnetic temperature sensor. The latter is placed in a weak magnetic field, hence exhibiting a temperature dependent magnetization M(T). Upon X-ray photon absorption, the rise of detector temperature causes a change of sensor magnetization, which is usually read out with a current-sensing dc-SQUID via a superconducting flux transformer. Here, an imperfect transformer matching, as well as a transformer intrinsic energy coupling losses, limit the achievable energy resolution. To challenge this limit, a novel integrated detector was developed, in which the temperature sensor is integrated into a custom-designed dc-SQUID to maximize signal coupling. A major challenge of this configuration is the Joule heating of the SQUID, since heating effects prevent cooling of the detector and thus limit its performance. For this reason, the developed 32 pixel detector makes use of a newly developed thermalization scheme for the SQUID’s shunt resistors, resulting in operation temperatures below 20 mK for the detector. With this kind of detector, a baseline energy resolution of dE = 1.3 eV, and dE = 1.8 eV at 5.9 keV was achieved

A low-cost electromagnetic tagging technology for wireless identification, sensing, and tracking of objects

Thesis (M.S.)--Massachusetts Institute of Technology, Program in Media Arts & Sciences, 1997.Includes bibliographical references (leaf 82).by Richard Ribon Fletcher.M.S

Low-cost electromagnetic tagging : design and implementation

Thesis (Ph. D.)--Massachusetts Institute of Technology, School of Architecture and Planning, Program in Media Arts and Sciences, 2002.Includes bibliographical references (p. 220-222).Several implementations of chipless RFID (Radio Frequency Identification) tags are presented and discussed as low-cost alternatives to chip-based RFID tags and sensors. An overview of present-day near-field electromagnetic tagging is presented, including both chip-based and chipless technologies with associated costs. As a candidate for low-cost ID tags, a design theory and implementation is presented for multiply-resonant planar metal structures. This theory includes a circuit model, a phenomenological model, and a framework for predicting the resonant frequencies as a function of geometrical and material properties. A novel physical geometry, a tree-like spiral structure, is proposed as a design that increases the number of resonances per unit area in a planar structure relative to the present day state-of-the-art. In addition to identification, it is shown how several chipless tags can also be designed to function as sensors. Several examples are discussed in detail, including: 1) a family of thermal sensor tags employing magnetic materials and 2) a family of sensor tags (to sense pressure, humidity, and pH) based on planar resonator structures. The latter section of the dissertation describes the evolution of my work in developing the necessary (and low-cost) instrumentation to support these new varieties of tag technologies, ranging from a $500 frequency-agile reader to a$5 reader for toy applications.by Richard Ribon Fletcher.Ph.D