Design and analysis of robust controllers for directional drilling tools

Directional drilling is a very important tool for the development of oil and gas deposits. Attitude control which enables directional drilling for the efficient placement of the directional drilling tools in petroleum producing zones is reviewed along with the various engineering requirements or constraints. This thesis explores a multivariable attitude governing plant model as formulated in Panchal et al. (2010) which is used for developing robust control techniques. An inherent input and measurement delay which accounts for the plant's dead-time is included in the design of the controllers. A Smith Predictor controller is developed for reducing the effect of this dead-time. The developed controllers are compared for performance and robustness using structured singular value analysis and also for their performance indicated by the transient response of the closed loop models. Results for the transient non-linear simulation of the proposed controllers are also presented. The results obtained indicate that the objectives are satisfactorily achieved

Damping controller design for FACTS devices in power systems using novel control techniques

Power systems are under increasing stress as deregulation introduces several new economic objectives for operation. Since power systems are being operated close to their limits, weak connections, unexpected events, hidden failures in protection system, human errors, and a host of other factors may cause a system to lose stability and even lead to catastrophic failure. Therefore, the need for improved system damping in a wider operating range is gaining more attention. Among the available damping control methods, each approach has advantages and disadvantages in different systems. The effectiveness of damping control depends on the devices chosen, the system modal feature, and the applied controller design method;In the literature, many approaches have been proposed to undertake this task. However, some of these approaches only take a fixed operating point into consideration without describing the changing uncertainty in varying system conditions; computational effort. Furthermore, no systematic comparison of controller design methods has been conducted with regard to different system profiles. Attention has been drawn to the enhanced susceptibility to inter-area oscillations between groups of machines under large others require a great deal of variation of system operating conditions. The linear parameter varying (LPV) approach, which has been widely studied in the literature, provides a potential method for capturing the varying system condition precisely without formulation of system uncertainty. However, in some cases no solution can be achieved if the system variation is too large using the traditional LPV approach. Also, sometimes the system structure imposes limitations in the achievable damping performance. In general, there is a critical need for a cost-effective control strategy applicable to different systems from an economic point of view;In this dissertation, a comprehensive comparison among controller design methods has been conducted to study the damping effectiveness of different FACTS devices. Based on these, a robust regional pole-placement method is applied in a TCSC damping controller design in a 4-machine system; an interpolated LPV approach is proposed and applied to designing a SVC damping controller in the IEEE 50-machine system; finally with the advantage of an additional feedback signal, limitations in achieving satisfactory damping performance can be relieved using a two-input single-output (TISO) damping controller for a TCSC in the IEEE 50-machine system

On-line estimation approaches to fault-tolerant control of uncertain systems

This thesis is concerned with fault estimation in Fault-Tolerant Control (FTC) and as such involves the joint problem of on-line estimation within an adaptive control system. The faults that are considered are significant uncertainties affecting the control variables of the process and their estimates are used in an adaptive control compensation mechanism. The approach taken involves the active FTC, as the faults can be considered as uncertainties affecting the control system. The engineering (application domain) challenges that are addressed are: (1) On-line model-based fault estimation and compensation as an FTC problem, for systems with large but bounded fault magnitudes and for which the faults can be considered as a special form of dynamic uncertainty. (2) Fault-tolerance in the distributed control of uncertain inter-connected systems The thesis also describes how challenge (1) can be used in the distributed control problem of challenge (2). The basic principle adopted throughout the work is that the controller has two components, one involving the nominal control action and the second acting as an adaptive compensation for significant uncertainties and fault effects. The fault effects are a form of uncertainty which is considered too large for the application of passive FTC methods. The thesis considers several approaches to robust control and estimation: augmented state observer (ASO); sliding mode control (SMC); sliding mode fault estimation via Sliding Mode Observer (SMO); linear parameter-varying (LPV) control; two-level distributed control with learning coordination

Design and verification of Guidance, Navigation and Control systems for space applications

In the last decades, systems have strongly increased their complexity in terms of number of functions that can be performed and quantity of relationships between functions and hardware as well as interactions of elements and disciplines concurring to the definition of the system. The growing complexity remarks the importance of defining methods and tools that improve the design, verification and validation of the system process: effectiveness and costs reduction without loss of confidence in the final product are the objectives that have to be pursued. Within the System Engineering context, the modern Model and Simulation based approach seems to be a promising strategy to meet the goals, because it reduces the wasted resources with respect to the traditional methods, saving money and tedious works. Model Based System Engineering (MBSE) starts from the idea that it is possible at any moment to verify, through simulation sessions and according to the phase of the life cycle, the feasibility, the capabilities and the performances of the system. Simulation is used during the engineering process and can be classified from fully numerical (i.e. all the equipment and conditions are reproduced as virtual model) to fully integrated hardware simulation (where the system is represented by real hardware and software modules in their operational environment). Within this range of simulations, a few important stages can be defined: algorithm in the loop (AIL), software in the loop (SIL), controller in the loop (CIL), hardware in the loop (HIL), and hybrid configurations among those. The research activity, in which this thesis is inserted, aims at defining and validating an iterative methodology (based on Model and Simulation approach) in support of engineering teams and devoted to improve the effectiveness of the design and verification of a space system with particular interest in Guidance Navigation and Control (GNC) subsystem. The choice of focusing on GNC derives from the common interest and background of the groups involved in this research program (ASSET at Politecnico di Torino and AvioSpace, an EADS company). Moreover, GNC system is sufficiently complex (demanding both specialist knowledge and system engineer skills) and vital for whatever spacecraft and, last but not least the verification of its behavior is difficult on ground because strong limitations on dynamics and environment reproduction arise. Considering that the verification should be performed along the entire product life cycle, a tool and a facility, a simulator, independent from the complexity level of the test and the stage of the project, is needed. This thesis deals with the design of the simulator, called StarSim, which is the real heart of the proposed methodology. It has been entirely designed and developed from the requirements definition to the software implementation and hardware construction, up to the assembly, integration and verification of the first simulator release. In addition, the development of this technology met the modern standards on software development and project management. StarSim is a unique and self-contained platform: this feature allows to mitigate the risk of incompatibility, misunderstandings and loss of information that may arise using different software, simulation tools and facilities along the various phases. Modularity, flexibility, speed, connectivity, real time operation, fidelity with real world, ease of data management, effectiveness and congruence of the outputs with respect to the inputs are the sought-after features in the StarSim design. For every iteration of the methodology, StarSim guarantees the possibility to verify the behavior of the system under test thanks to the permanent availability of virtual models, that substitute all those elements not yet available and all the non-reproducible dynamics and environmental conditions. StarSim provides a furnished and user friendly database of models and interfaces that cover different levels of detail and fidelity, and supports the updating of the database allowing the user to create custom models (following few, simple rules). Progressively, pieces of the on board software and hardware can be introduced without stopping the process of design and verification, avoiding delays and loss of resources. StarSim has been used for the first time with the CubeSats belonging to the e-st@r program. It is an educational project carried out by students and researchers of the “CubeSat Team Polito” in which StarSim has been mainly used for the payload development, an Active Attitude Determination and Control System, but StarSim’s capabilities have also been updated to evaluate functionalities, operations and performances of the entire satellite. AIL, SIL, CIL, HIL simulations have been performed along all the phases of the project, successfully verifying a great number of functional and operational requirements. In particular, attitude determination algorithms, control laws, modes of operation have been selected and verified; software has been developed step by step and the bugs-free executable files have been loaded on the micro-controller. All the interfaces and protocols as well as data and commands handling have been verified. Actuators, logic and electrical circuits have been designed, built and tested and sensors calibration has been performed. Problems such as real time and synchronization have been solved and a complete hardware in the loop simulation test campaign both for A-ADCS standalone and for the entire satellite has been performed, verifying the satisfaction of a great number of CubeSat functional and operational requirements. The case study represents the first validation of the methodology with the first release of StarSim. It has been proven that the methodology is effective in demonstrating that improving the design and verification activities is a key point to increase the confidence level in the success of a space mission

Commande Robuste et Contraintes d'Optimisation

This thesis presents an overview of my research activities carried out since my PhD in 2001. In the first section, description of the projects, my different contributions to robust control applied to the spatial field and underwater robotics, are highlighted. My research project for the coming years is then presented; I propose an original and efficient methodology to compute simple control laws by combining \textit{robust control} and \textit{global optimization}. The second part of this thesis is dedicated to the scientific aspects that will help clarify the proposed research project. As a starting point, Youla parametrization is presented as a tool to \textit{render convex} the control problem, and the subsequent work is used as a foundation to establish specifications based on the constraints related to optimization. This theme has served as a driving thread in illustrating how industrial requirements could lead to a control problem. Parallel to this, the question also arose as to the practical realization of results from these methodologies, that is, how they might be implemented in an embedded system. Ariane 5 launcher control is taken as an example for research on the structured control and validation.Ce mémoire présente un panorama des activités de recherche menées depuis ma thèse de doctorat en 2001. Dans une première partie, à travers la description des projets, sont mises en avant les différentes contributions à la commande robuste appliquée au monde spatial et au monde de la robotique sous-marine. On montre alors comment s'est construit le projet de recherche proposé pour les années à venir. Il s'agit de proposer une méthodologie originale et efficace pour régler des lois de commande simple à implémenter en combinant \textit{commande robuste} et \textit{optimisation globale}. La seconde partie de ce mémoire est consacrée à quelques aspects scientifiques qui aident à comprendre le projet de recherche proposé. On y trouve comme point de départ la paramétrisation de Youla en tant qu'outil pour \textit{convexifier} le problème de commande et les travaux qui en ont découlés pour traduire un cahier des charges en terme de contrainte dans un problème d'optimisation. Cette thématique a été un fil conducteur important pour faire le lien avec la demande industrielle de savoir comment les exigences étaient traduites dans le problème de commande. En parallèle, s'est posée la question de la réalisation pratique des résultats issues de ces méthodologies, c'est-à-dire leur implémentation sur un système embarqué. On prendra comme exemple les activités de recherche sur la structuration de correcteur et leur qualification pour les lois de pilotage des lanceurs Ariane 5

Summary of Research 1994

The views expressed in this report are those of the authors and do not reflect the official policy or position of the Department of Defense or the U.S. Government.This report contains 359 summaries of research projects which were carried out under funding of the Naval Postgraduate School Research Program. A list of recent publications is also included which consists of conference presentations and publications, books, contributions to books, published journal papers, and technical reports. The research was conducted in the areas of Aeronautics and Astronautics, Computer Science, Electrical and Computer Engineering, Mathematics, Mechanical Engineering, Meteorology, National Security Affairs, Oceanography, Operations Research, Physics, and Systems Management. This also includes research by the Command, Control and Communications (C3) Academic Group, Electronic Warfare Academic Group, Space Systems Academic Group, and the Undersea Warfare Academic Group

Six Decades of Flight Research: An Annotated Bibliography of Technical Publications of NASA Dryden Flight Research Center, 1946-2006

Titles, authors, report numbers, and abstracts are given for nearly 2900 unclassified and unrestricted technical reports and papers published from September 1946 to December 2006 by the NASA Dryden Flight Research Center and its predecessor organizations. These technical reports and papers describe and give the results of 60 years of flight research performed by the NACA and NASA, from the X-1 and other early X-airplanes, to the X-15, Space Shuttle, X-29 Forward Swept Wing, X-31, and X-43 aircraft. Some of the other research airplanes tested were the D-558, phase 1 and 2; M-2, HL-10 and X-24 lifting bodies; Digital Fly-By-Wire and Supercritical Wing F-8; XB-70; YF-12; AFTI F-111 TACT and MAW; F-15 HiDEC; F-18 High Alpha Research Vehicle, F-18 Systems Research Aircraft and the NASA Landing Systems Research aircraft. The citations of reports and papers are listed in chronological order, with author and aircraft indices. In addition, in the appendices, citations of 270 contractor reports, more than 200 UCLA Flight System Research Center reports, nearly 200 Tech Briefs, 30 Dryden Historical Publications, and over 30 videotapes are included