Market segmentation and ideal point identification for new product design using fuzzy data compression and fuzzy clustering methods

In product design, various methodologies have been proposed for market segmentation, which group consumers with similar customer requirements into clusters. Central points on market segments are always used as ideal points of customer requirements for product design, which reflects particular competitive strategies to effectively reach all consumers’ interests. However, existing methodologies ignore the fuzziness on consumers’ customer requirements. In this paper, a new methodology is proposed to perform market segmentation based on consumers’ customer requirements, which exist fuzziness. The methodology is an integration of a fuzzy compression technique for multi-dimension reduction and a fuzzy clustering technique. It first compresses the fuzzy data regarding customer requirements from high dimensions into two dimensions. After the fuzzy data is clustered into marketing segments, the centre points of market segments are used as ideal points for new product development. The effectiveness of the proposed methodology in market segmentation and identification of the ideal points for new product design is demonstrated using a case study of new digital camera design

A Survey on Energy-Efficient Strategies in Static Wireless Sensor Networks

A comprehensive analysis on the energy-efficient strategy in static Wireless Sensor Networks (WSNs) that are not equipped with any energy harvesting modules is conducted in this article. First, a novel generic mathematical definition of Energy Efficiency (EE) is proposed, which takes the acquisition rate of valid data, the total energy consumption, and the network lifetime of WSNs into consideration simultaneously. To the best of our knowledge, this is the first time that the EE of WSNs is mathematically defined. The energy consumption characteristics of each individual sensor node and the whole network are expounded at length. Accordingly, the concepts concerning EE, namely the Energy-Efficient Means, the Energy-Efficient Tier, and the Energy-Efficient Perspective, are proposed. Subsequently, the relevant energy-efficient strategies proposed from 2002 to 2019 are tracked and reviewed. Specifically, they respectively are classified into five categories: the Energy-Efficient Media Access Control protocol, the Mobile Node Assistance Scheme, the Energy-Efficient Clustering Scheme, the Energy-Efficient Routing Scheme, and the Compressive Sensing--based Scheme. A detailed elaboration on both of the basic principle and the evolution of them is made. Finally, further analysis on the categories is made and the related conclusion is drawn. To be specific, the interdependence among them, the relationships between each of them, and the Energy-Efficient Means, the Energy-Efficient Tier, and the Energy-Efficient Perspective are analyzed in detail. In addition, the specific applicable scenarios for each of them and the relevant statistical analysis are detailed. The proportion and the number of citations for each category are illustrated by the statistical chart. In addition, the existing opportunities and challenges facing WSNs in the context of the new computing paradigm and the feasible direction concerning EE in the future are pointed out

Deformable meshes for shape recovery: models and applications

With the advance of scanning and imaging technology, more and more 3D objects become available. Among them, deformable objects have gained increasing interests. They include medical instances such as organs, a sequence of objects in motion, and objects of similar shapes where a meaningful correspondence can be established between each other. Thus, it requires tools to store, compare, and retrieve them. Many of these operations depend on successful shape recovery. Shape recovery is the task to retrieve an object from the environment where its geometry is hidden or implicitly known. As a simple and versatile tool, mesh is widely used in computer graphics for modelling and visualization. In particular, deformable meshes are meshes which can take the deformation of deformable objects. They extend the modelling ability of meshes. This dissertation focuses on using deformable meshes to approach the 3D shape recovery problem. Several models are presented to solve the challenges for shape recovery under different circumstances. When the object is hidden in an image, a PDE deformable model is designed to extract its surface shape. The algorithm uses a mesh representation so that it can model any non-smooth surface with an arbitrary precision compared to a parametric model. It is more computational efficient than a level-set approach. When the explicit geometry of the object is known but is hidden in a bank of shapes, we simplify the deformation of the model to a graph matching procedure through a hierarchical surface abstraction approach. The framework is used for shape matching and retrieval. This idea is further extended to retain the explicit geometry during the abstraction. A novel motion abstraction framework for deformable meshes is devised based on clustering of local transformations and is successfully applied to 3D motion compression

A framework for the near-real-time optimization of integrated oil & gas midstream processing networks

The oil and gas industry plays a key role in the world’s economy. Vast quantities of crude oil, their by-products and derivatives are produced, processed and distributed every day. Indeed, producing and processing significant volumes of crude oil requires connecting to wells in different fields that are usually spread across large geographical areas. This crude oil is then processed by Gas Oil Separation Plants (GOSPs). These facilities are often grouped into clusters that are within approximate distance from each other and then connected laterally via swing lines which allow shifting part or all of the production from one GOSP to another. Transfer lines also exist to allow processing intermediate products in neighbouring GOSPs, thereby increasing complexity and possible interactions. In return, this provides an opportunity to leverage mathematical optimization to improve network planning and load allocation. Similarly, in major oil producing countries, vast gas processing networks exist to process associated and non-associated gases. These gas plants are often located near major feed sources. Similar to GOSPs, they are also often connected through swing lines, which allow shifting feedstock from some plants to others. GOSPs and gas plants are often grouped as oil and gas midstream plants. These plants are operated on varied time horizons and plant boundaries. While plant operators are concerned with the day-to-day operation of their facility, network operators must ensure that the entire network is operated optimally and that product supply is balanced with demand. They are therefore in charge of allocating load to individual plants, while knowing each plants constraints and processing capabilities. Network planners are also in charge of producing production plans at varied time-scales, which vary from yearly to monthly and near-real time. This work aims to establish a novel framework for optimizing Oil and Gas Midstream plants for near-real time network operation. This topic has not been specifically addressed in the existing literature. It examines problems which involve operating networks of GOSPs and gas plants towards an optimal solution. It examines various modelling approaches which are suited for this specific application. It then focuses at this stage of the research on the GOSP optimization problem where it addresses optimizing the operation of a complex network of GOSPs. The goal is to operate this network such that oil production targets are met at minimum energy consumption, and therefore minimizing OpEx and Greenhouse Gas Emissions. Similarly, it is often required to operate the network such that production is maximized. This thesis proposes a novel methodology to formulate and solve this problem. It describes the level of fidelity used to represent physical process units. A Mixed Integer Non-Linear Programming (MINLP) problem is then formulated and solved to optimize load allocation, swing line flowrates and equipment utilization. The model demonstrates advanced capabilities to systematically prescribe optimal operating points. This was then applied to an existing integrated network of GOSPs and tested at varying crude oil demand levels. The results demonstrate the ability to minimize energy consumption by up to 51% in the 50% throughput case while meeting oil production targets without added capital investment.Open Acces

Bio-inspired computation for big data fusion, storage, processing, learning and visualization: state of the art and future directions

This overview gravitates on research achievements that have recently emerged from the confluence between Big Data technologies and bio-inspired computation. A manifold of reasons can be identified for the profitable synergy between these two paradigms, all rooted on the adaptability, intelligence and robustness that biologically inspired principles can provide to technologies aimed to manage, retrieve, fuse and process Big Data efficiently. We delve into this research field by first analyzing in depth the existing literature, with a focus on advances reported in the last few years. This prior literature analysis is complemented by an identification of the new trends and open challenges in Big Data that remain unsolved to date, and that can be effectively addressed by bio-inspired algorithms. As a second contribution, this work elaborates on how bio-inspired algorithms need to be adapted for their use in a Big Data context, in which data fusion becomes crucial as a previous step to allow processing and mining several and potentially heterogeneous data sources. This analysis allows exploring and comparing the scope and efficiency of existing approaches across different problems and domains, with the purpose of identifying new potential applications and research niches. Finally, this survey highlights open issues that remain unsolved to date in this research avenue, alongside a prescription of recommendations for future research.This work has received funding support from the Basque Government (Eusko Jaurlaritza) through the Consolidated Research Group MATHMODE (IT1294-19), EMAITEK and ELK ARTEK programs. D. Camacho also acknowledges support from the Spanish Ministry of Science and Education under PID2020-117263GB-100 grant (FightDIS), the Comunidad Autonoma de Madrid under S2018/TCS-4566 grant (CYNAMON), and the CHIST ERA 2017 BDSI PACMEL Project (PCI2019-103623, Spain)

A Novel Design of a Solid Oxide Fuel Cell-based Combined Cooling, Heat and Power Residential System in the UK

This paper details the use of objective sizing techniques for a novel design of a residential solid oxide fuel cell (SOFC) combined cooling, heating and electrical power (CCHP) system for the UK market. The aim of the research is to determine the objective sizing of key parameters relating to the cooling, heating and power supply and demand, namely the number of cells in the SOFC, the effectiveness of the heat exchangers and the coefficient of performance (COP) of the absorption chillers. These parameters are determined taking into account the aspects of efficiency, economic and environmental impacts through use of the entropy-weighting approach and grey relationship analysis. The combination of these two approaches will help designers maximise efficiency of energy utilization and minimise emissions and costs of the system being examined. It is envisaged that electrical demand would be met by the fuel cell (FC) stacks while the most efficient use is made of heat that is generated by the FC through waste heat recovery to satisfy domestic hot water, freezers, space heating and space cooling. The demand of conventional electric freezers is innovatively designed to be fulfilled by heat exchangers and absorption chillers to further increase the efficiency of heat energy use. Due to the energy demand characteristics of the UK domestic sector, the proposed system structure, objective sizing values and operation control strategies - supported by MATLAB/Simulink software - are suited to the residential energy demands of a single household

Advances in Condition Monitoring, Optimization and Control for Complex Industrial Processes

The book documents 25 papers collected from the Special Issue “Advances in Condition Monitoring, Optimization and Control for Complex Industrial Processes”, highlighting recent research trends in complex industrial processes. The book aims to stimulate the research field and be of benefit to readers from both academic institutes and industrial sectors

17. Simpozij „Materijali i metalurgija“ – dopuna „Zbornik sažetaka”

In Metalurgija 63 (2024) 2,303-320 published „ Book of Abstracts “ (224). Deadline for received of Abstracts was November, 30,2023 y. Many authors have request new deadline by March, 25, 2024 y. Organizing committee have accept new deadline. Now it published supplements of 103 Abstracts.U Metalurgiji 63 (2024) 2,303-320 objavljen je Zbornik sažetaka (224). Rok za primitak sažetke je bio 30. studeni 2023. god. Mnogi autori zatražili novi rok do 25.03.2024. Organizacijski odbor Simpozija je prihvatio novi termin. Objavljuje se sada dodatnih još 160 sažetaka