Wideband Channel Sounding Techniques for Dynamic Spectrum Access Networks

In recent years, cognitive radio has drawn extensive research attention due to its ability to improve the efficiency of spectrum usage by allowing dynamic spectrum resource sharing between primary and secondary users. The concept of cognitive radio was first presented by Joseph Mitola III and Gerald Q. Maguire, Jr., in which either network or wireless node itself changes particular transmission and reception parameters to execute its tasks efficiently without interfering with the primary users [1]. Such a transceiving mechanism and network environment is called the dynamic spectrum access (DSA) network. The Federal Communications Commission (FCC) allows any type of transmission in unlicensed bands at any time as long as their transmit power level obeys specific FCC regulations. Performing channel sounding as a secondary user in such an environment becomes a challenge due to the rapidly changing network environment and also the limited transmission power. Moreover, to obtain the long term behavior of the channel in the DSA network is impractical with conventional channel sounders due to frequent changes in frequency, transmission bandwidth, and power. Conventional channel sounding techniques need to be adapted accordingly to be operated in the DSA networks. In this dissertation, two novel channel sounding system frameworks are proposed. The Multicarrier Direct Sequence Swept Time-Delay Cross Correlation (MC-DS-STDCC) channel sounding technique is designed for the DSA networks aiming to perform channel sounding across a large bandwidth with minimal interference. It is based on the STDCC channel sounder and Multicarrier Direct Sequence Code Division Multiple Access (MC-DS-CDMA) technique. The STDCC technique, defined by Parsons [2], was first employed by Cox in the measurement of 910 MHz band [3{6]. The MC-DS-CDMA technique enables the channel sounder to be operated at different center frequencies with low transmit power. Hence, interference awareness and frequency agility are achieved. The OFDM-based channel sounder is an alternative to the MC-DS-STDCC technique. It utilizes user data as the sounding signal such that the interference is minimized during the course of transmission. Furthermore, the OFDM-based channel sounder requires lower sampling rate than the MC-DS-STDCC system since no spreading is necessary

Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks

Soaring capacity and coverage demands dictate that future cellular networks need to soon migrate towards ultra-dense networks. However, network densification comes with a host of challenges that include compromised energy efficiency, complex interference management, cumbersome mobility management, burdensome signaling overheads and higher backhaul costs. Interestingly, most of the problems, that beleaguer network densification, stem from legacy networks' one common feature i.e., tight coupling between the control and data planes regardless of their degree of heterogeneity and cell density. Consequently, in wake of 5G, control and data planes separation architecture (SARC) has recently been conceived as a promising paradigm that has potential to address most of aforementioned challenges. In this article, we review various proposals that have been presented in literature so far to enable SARC. More specifically, we analyze how and to what degree various SARC proposals address the four main challenges in network densification namely: energy efficiency, system level capacity maximization, interference management and mobility management. We then focus on two salient features of future cellular networks that have not yet been adapted in legacy networks at wide scale and thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and device-to-device (D2D) communications. After providing necessary background on CoMP and D2D, we analyze how SARC can particularly act as a major enabler for CoMP and D2D in context of 5G. This article thus serves as both a tutorial as well as an up to date survey on SARC, CoMP and D2D. Most importantly, the article provides an extensive outlook of challenges and opportunities that lie at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201

A Survey of Air-to-Ground Propagation Channel Modeling for Unmanned Aerial Vehicles

In recent years, there has been a dramatic increase in the use of unmanned aerial vehicles (UAVs), particularly for small UAVs, due to their affordable prices, ease of availability, and ease of operability. Existing and future applications of UAVs include remote surveillance and monitoring, relief operations, package delivery, and communication backhaul infrastructure. Additionally, UAVs are envisioned as an important component of 5G wireless technology and beyond. The unique application scenarios for UAVs necessitate accurate air-to-ground (AG) propagation channel models for designing and evaluating UAV communication links for control/non-payload as well as payload data transmissions. These AG propagation models have not been investigated in detail when compared to terrestrial propagation models. In this paper, a comprehensive survey is provided on available AG channel measurement campaigns, large and small scale fading channel models, their limitations, and future research directions for UAV communication scenarios

Radio link characterization of the CorteXlab testbed with a large number of software defined radio nodes

International audienceThis paper presents the first implementation on software defined radio nodes in the large scale testbed called CorteXlab of a radio link estimation technique based on OFDM transmissions. The purpose of this large scale testbed is to offer to the whole scientific community an open tool to test new techniques for multiuser , cooperative and cognitive radio networks in a controlled environment. As the experimentation room was defined in order to offer reproducible measurements, it is important to be able to characterize each radio link between all transceivers. Therefore, we present here the development of a channel sounder directly implemented on the software radio nodes

Subsurface sounders

Airborne or spaceborne electromagnetic systems used to detect subsurface features are discussed. Data are given as a function of resistivity of ground material, magnetic permeability of free space, and angular frequency. It was noted that resistivities vary with the water content and temperature

Toward 6G TKμ\mu Extreme Connectivity: Architecture, Key Technologies and Experiments

Sixth-generation (6G) networks are evolving towards new features and order-of-magnitude enhancement of systematic performance metrics compared to the current 5G. In particular, the 6G networks are expected to achieve extreme connectivity performance with Tbps-scale data rate, Kbps/Hz-scale spectral efficiency, and $\mu$s-scale latency. To this end, an original three-layer 6G network architecture is designed to realise uniform full-spectrum cell-free radio access and provide task-centric agile proximate support for diverse applications. The designed architecture is featured by super edge node (SEN) which integrates connectivity, computing, AI, data, etc. On this basis, a technological framework of pervasive multi-level (PML) AI is established in the centralised unit to enable task-centric near-real-time resource allocation and network automation. We then introduce a radio access network (RAN) architecture of full spectrum uniform cell-free networks, which is among the most attractive RAN candidates for 6G TK$\mu$ extreme connectivity. A few most promising key technologies, i.e., cell-free massive MIMO, photonics-assisted Terahertz wireless access and spatiotemporal two-dimensional channel coding are further discussed. A testbed is implemented and extensive trials are conducted to evaluate innovative technologies and methodologies. The proposed 6G network architecture and technological framework demonstrate exciting potentials for full-service and full-scenario applications.Comment: 15 pages, 12 figure

D2.2 Draft Overall 5G RAN Design

This deliverable provides the consolidated preliminary view of the METIS-II partners on the 5 th generation (5G) radio access network (RAN) design at a mid-point of the project. The overall 5G RAN is envisaged to operate over a wide range of spectrum bands comprising of heterogeneous spectrum usage scenarios. More precisely, the 5G air interface (AI) is expected to be composed of multiple so-called AI variants (AIVs), which include evolved legacy technology such as Long Term Evolution Advanced (LTE-A) as well as novel AIVs, which may be tailored to particular services or frequency bands.Arnold, P.; Bayer, N.; Belschner, J.; Rosowski, T.; Zimmermann, G.; Ericson, M.; Da Silva, IL.... (2016). D2.2 Draft Overall 5G RAN Design. https://doi.org/10.13140/RG.2.2.17831.1424