COMPLEX PULSE FORMING TEACHNIQUE USING AM DETECTOR TYPE CIRCUITRY AND THE APPLICATION OF CDMA TO RFID FOR THE SIMULTANEOUS READING OF MULTIPLE TAGS

A novel complex ultra wideband RF pulse forming technique has been implemented in this research, using the coefficients derived from discrete Fourier transform of a virtual pulse train. Incorporated in this technique is a multiple frequency communication systems designed such that transmitter receiver proximity and the fading effect of the individual frequencies make part of a corresponding modulation technique. A code division multiple access (CDMA) application to RFID to greatly reduce read time, while at the same time eliminating inter tag interference, has been investigated with the analysis of a typical cart aisle scenario. With the current rate of growth of inventory world wide there is a tremendous need for more efficient method of data gathering, data storage, and data retrieval. In this dissertation, the application of the CDMA RFID technology has been analyzed to demonstrate the potentials of integrating the RFID technology to the EPC global numbering system

Spectrum control and iterative coding for high capacity multiband OFDM

The emergence of Multiband Orthogonal Frequency Division Modulation (MB-OFDM) as an ultra-wideband (UWB) technology injected new optimism in the market through realistic commercial implementation, while keeping promise of high data rates intact. However, it has also brought with it host of issues, some of which are addressed in this thesis. The thesis primarily focuses on the two issues of spectrum control and user capacity for the system currently proposed by the Multiband OFDM Alliance (MBOA). By showing that line spectra are still an issue for new modulation scheme (MB-OFDM), it proposes a mechanism of scrambling the data with an increased length linear feedback shift register (compared to the current proposal), a new set of seeds, and random phase reversion for the removal of line spectra. Following this, the thesis considers a technique for increasing the user capacity of the current MB-OFDM system to meet the needs of future wireless systems, through an adaptive multiuser synchronous coded transmission scheme. This involves real time iterative generation of user codes, which are generated over time and frequency leading to increased capacity. With the assumption of complete channel state information (CSI) at the receiver, an iterative MMSE algorithm is used which involves replacement of each users s signature with its normalized MMSE filter function allowing the overall Total Squared Correlation (TSC) of the system to decrease until the algorithm converges to a fixed set of signature vectors. This allows the system to be overloaded and user\u27s codes to be quasi-orthogonal. Simulation results show that for code of length nine (spread over three frequency bands and three time slots), ten users can be accommodated for a given QoS and with addition of single frequency sub-band which allows the code length to increase from nine to twelve (four frequency sub-bands and three time slots), fourteen users with nearly same QoS can be accommodated in the system. This communication is overlooked by a central controller with necessary functionalities to facilitate the process. The thesis essentially considers the uplink from transmitting devices to this central controller. Furthermore, analysis of this coded transmission in presence of interference is carried to display the robustness of this scheme through its adaptation by incorporating knowledge of existing Narrowband (NB) Interference for computing the codes. This allows operation of sub-band coexisting with NB interference without substantial degradation given reasonable interference energy (SIR=-l0dB and -5dB considered). Finally, the thesis looks at design implementation and convergence issues related to code vector generation whereby, use of Lanczos algorithm is considered for simpler design and faster convergence. The algorithm can be either used to simplify design implementation by providing simplified solution to Weiner Hopf equation (without requiring inverse of correlation matrix) over Krylov subspace or can be used to expedite convergence by updating the signature sequence with eigenvector corresponding to the least eigenvalue of the signature correlation matrix through reduced rank eigen subspace search

Ultra-Wideband Secure Communications and Direct RF Sampling Transceivers

Larger wireless device bandwidth results in new capabilities in terms of higher data rates and security. The 5G evolution is focus on exploiting larger bandwidths for higher though-puts. Interference and co-existence issues can also be addressed by the larger bandwidth in the 5G and 6G evolution. This dissertation introduces of a novel Ultra-wideband (UWB) Code Division Multiple Access (CDMA) technique to exploit the largest bandwidth available in the upcoming wireless connectivity scenarios. The dissertation addresses interference immunity, secure communication at the physical layer and longer distance communication due to increased receiver sensitivity. The dissertation presents the design, workflow, simulations, hardware prototypes and experimental measurements to demonstrate the benefits of wideband Code-Division-Multiple-Access. Specifically, a description of each of the hardware and software stages is presented along with simulations of different scenarios using a test-bench and open-field measurements. The measurements provided experimental validation carried out to demonstrate the interference mitigation capabilities. In addition, Direct RF sampling techniques are employed to handle the larger bandwidth and avoid analog components. Additionally, a transmit and receive chain is designed and implemented at 28 GHz to provide a proof-of-concept for future 5G applications. The proposed wideband transceiver is also used to demonstrate higher accuracy direction finding, as much as 10 times improvement

Doctor of Philosophy

dissertationLow-cost wireless embedded systems can make radio channel measurements for the purposes of radio localization, synchronization, and breathing monitoring. Most of those systems measure the radio channel via the received signal strength indicator (RSSI), which is widely available on inexpensive radio transceivers. However, the use of standard RSSI imposes multiple limitations on the accuracy and reliability of such systems; moreover, higher accuracy is only accessible with very high-cost systems, both in bandwidth and device costs. On the other hand, wireless devices also rely on synchronized notion of time to coordinate tasks (transmit, receive, sleep, etc.), especially in time-based localization systems. Existing solutions use multiple message exchanges to estimate time offset and clock skew, which further increases channel utilization. In this dissertation, the design of the systems that use RSSI for device-free localization, device-based localization, and breathing monitoring applications are evaluated. Next, the design and evaluation of novel wireless embedded systems are introduced to enable more fine-grained radio signal measurements to the application. I design and study the effect of increasing the resolution of RSSI beyond the typical 1 dB step size, which is the current standard, with a couple of example applications: breathing monitoring and gesture recognition. Lastly, the Stitch architecture is then proposed to allow the frequency and time synchronization of multiple nodes' clocks. The prototype platform, Chronos, implements radio frequency synchronization (RFS), which accesses complex baseband samples from a low-power low-cost narrowband radio, estimates the carrier frequency offset, and iteratively drives the difference between two nodes' main local oscillators (LO) to less than 3 parts per billion (ppb). An optimized time synchronization and ranging protocols (EffToF) is designed and implemented to achieve the same timing accuracy as the state-of-the-art but with 59% less utilization of the UWB channel. Based on this dissertation, I could foresee Stitch and RFS further improving the robustness of communications infrastructure to GPS jamming, allow exploration of applications such as distributed beamforming and MIMO, and enable new highly-synchronous wireless sensing and actuation systems

CYCLOSTATIONARY FEATURES OF PAL TV AND WIRELESS MICROPHONE FOR COGNITIVE RADIO APPLICATIONS

Frequency spectrum being a scarce resource in communication system design, spectrum sharing seems to be the solution to an optimal utilization of frequency spectrum. The traditional fixed frequency allocation is not suitable for futuristic networks that demand more and more spectrum for new wireless services. Cognitive radio is a new emerging technology based on spectrum sharing concept. Spectrum sensing is a vital task in this emerging technology by which it is able to scan the frequency spectrum to identify the unused spectrum bands and utilize them. In this thesis, we discuss spectrum sensing in the context of IEEE 802.22 Wireless Regional Area Network (WRAN). In order to do so, we develop the co-existence scenario with three cases according to geographical positions of primary services and secondary service. In WRAN application, the SUs utilize the unused channel in TV spectrum, which means that the primary users are TV service and other FCC part 74 low power licensed devices. We focus on special case of Analog TV-PAL service and wireless microphone service as part 74 devices. Before discussing the spectrum sensing technique, we propose architecture for sensing receiver. The concept of noise uncertainty is also introduced in this context. The cyclostationarity theory is introduced and we explain the motivation behind using the theory for spectrum sensing and the reason that makes the cyclostationary features detector a powerful detection technique in cognitive radio. We obtain the cyclostationary features of these primary signals using spectral correlation function. Based on these features, we develop two algorithms for spectrum sensing and their performances are evaluated in comparison with energy detector which is considered as the standard simple detector. Given that the cyclostationary features are unique for a particular signal; these features can be used for signals classification. In our case, we use those features to decide if the licensed channel is used by TV service or wireless microphone service. This provides additional information for spectrum management and power control. Implementation issue is very important in cognitive radio generally and spectrum sensing specially, hence we discuss the implementation of cyclostationary features detector and compare its complexity with that of energy detector

Indoor Positioning and Navigation

In recent years, rapid development in robotics, mobile, and communication technologies has encouraged many studies in the field of localization and navigation in indoor environments. An accurate localization system that can operate in an indoor environment has considerable practical value, because it can be built into autonomous mobile systems or a personal navigation system on a smartphone for guiding people through airports, shopping malls, museums and other public institutions, etc. Such a system would be particularly useful for blind people. Modern smartphones are equipped with numerous sensors (such as inertial sensors, cameras, and barometers) and communication modules (such as WiFi, Bluetooth, NFC, LTE/5G, and UWB capabilities), which enable the implementation of various localization algorithms, namely, visual localization, inertial navigation system, and radio localization. For the mapping of indoor environments and localization of autonomous mobile sysems, LIDAR sensors are also frequently used in addition to smartphone sensors. Visual localization and inertial navigation systems are sensitive to external disturbances; therefore, sensor fusion approaches can be used for the implementation of robust localization algorithms. These have to be optimized in order to be computationally efficient, which is essential for real-time processing and low energy consumption on a smartphone or robot

Interference management in impulse-radio ultra-wide band networks

We consider networks of impulse-radio ultra-wide band (IR-UWB) devices. We are interested in the architecture, design, and performance evaluation of these networks in a low data-rate, self-organized, and multi-hop setting. IR-UWB is a potential physical layer for sensor networks and emerging pervasive wireless networks. These networks are likely to have no particular infrastructure, might have nodes embedded in everyday life objects and have a size ranging from a few dozen nodes to large-scale networks composed of hundreds of nodes. Their average data-rate is low, on the order of a few megabits per second. IR-UWB physical layers are attractive for these networks because they potentially combine low-power consumption, robustness to multipath fading and to interference, and location/ranging capability. The features of an IR-UWB physical layer greatly differ from the features of the narrow-band physical layers used in existing wireless networks. First, the bandwidth of an IR-UWB physical layer is at least 500 MHz, which is easily two orders of magnitude larger than the bandwidth used by a typical narrow-band physical layer. Second, this large bandwidth implies stringent radio spectrum regulations because UWB systems might occupy a portion of the spectrum that is already in use. Consequently, UWB systems exhibit extremely low power spectral densities. Finally IR-UWB physical layers offer multi-channel capabilities for multiple and concurrent access to the physical layer. Hence, the architecture and design of IR-UWB networks are likely to differ significantly from narrow-band wireless networks. For the network to operate efficiently, it must be designed and implemented to take into account the features of IR-UWB and to take advantage of them. In this thesis, we focus on both the medium access control (MAC) layer and the physical layer. Our main objectives are to understand and determine (1) the architecture and design principles of IR-UWB networks, and (2) how to implement them in practical schemes. In the first part of this thesis, we explore the design space of IR-UWB networks and analyze the fundamental design choices. We show that interference from concurrent transmissions should not be prevented as in protocols that use mutual exclusion (for instance, IEEE 802.11). Instead, interference must be managed with rate adaptation, and an interference mitigation scheme should be used at the physical layer. Power control is useless. Based on these findings, we develop a practical PHY-aware MAC protocol that takes into account the specific nature of IR-UWB and that is able to adapt its rate to interference. We evaluate the performance obtained with this design: It clearly outperforms traditional designs that, instead, use mutual exclusion or power control. One crucial aspect of IR-UWB networks is packet detection and timing acquisition. In this context, a network design choice is whether to use a common or private acquisition preamble for timing acquisition. Therefore, we evaluate how this network design issue affects the network throughput. Our analysis shows that a private acquisition preamble yields a tremendous increase in throughput, compared with a common acquisition preamble. In addition, simulations on multi-hop topologies with TCP flows demonstrate that a network using private acquisition preambles has a stable throughput. On the contrary, using a common acquisition preamble exhibits an effect similar to exposed terminal issues in 802.11 networks: the throughput is severely degraded and flow starvation might occur. In the second part of this thesis, we are interested in IEEE 802.15.4a, a standard for low data-rate, low complexity networks that employs an IR-UWB physical layer. Due to its low complexity, energy detection is appealing for the implementation of practical receivers. But it is less robust to multi-user interference (MUI) than a coherent receiver. Hence, we evaluate the performance of an IEEE 802.15.4a physical layer with an energy detection receiver to find out whether a satisfactory performance is still obtained. Our results show that MUI severely degrades the performance in this case. The energy detection receiver significantly diminishes one of the most appealing benefits of UWB, specifically its robustness to MUI and thus the possibility of allowing for parallel transmissions. This performance analysis leads to the development of an IR-UWB receiver architecture, based on energy detection, that is robust to MUI and adapted to the peculiarities of IEEE 802.15.4a. This architecture greatly improves the performance and entails only a moderate increase in complexity. Finally, we present the architecture of an IR-UWB physical layer implementation in ns-2, a well-known network simulator. This architecture is generic and allows for the simulation of several multiple-access physical layers. In addition, it comprises a model of packet detection and timing acquisition. Network simulators also need to have efficient algorithms to accurately compute bit or packet error rates. Hence, we present a fast algorithm to compute the bit error rate of an IR-UWB physical layer in a network setting with MUI. It is based on a novel combination of large deviation theory and importance sampling

Performance of a Busy-Tone Approach on 802.11 Wireless Network

The big evolution of modem applications in the wireless networks domain as the wireless videos remote access, big files transfer, streaming and downloading high definition videos etc, has led to using the mmWave technology (60 GHz for example) that represents an important solution for the se applications because of the advantages presented by this frequency band such as the high data rate transmission up to multi gigabits, also the large bandwidth that goes up to 7 GHz. The use of the mm Wave technology requires a MAC protocol which ensures the channel sharing between users in a multi-node network, with directional antennas that increase spatial reuse and cover a wider area compared to the omnidirecti on al antennas. Many access method approaches were used in order to resolve these problems, for instance, the methods that use a signaling channel, then methods that exploit directional antennas with directional frames, and those using beacons and many others .... In our project, we worked on the adaptation of the 'Busy - Tone' method using the 802.11 ad protocol with directional antennas in addition to a coordination between 2.4 GHz and 60 GHz. This method offers a big solution to resolve the collisions of data and control packets that affect and reduce the network capacity and lead to data loss. Simulation results showed the efficiency of this model by reducing collisions caused by hidden terminais, therefore, enhancing the performance of the network in terms oftransmission delay, retransmission attempts and throughput. L'évolution des applications modernes dans le domaine des réseaux sans fils tel que 1 'accès à distance des vidéos sans fils, le transfert des gros fichiers, flux des vidéos à haute définition etc .... nécessite l'utilisation de la bande 60 GHz qui présente une solution très importante pour ces applications grâce aux avantages que présente cette bande tel que le taux de transmission des données qui atteint quelques Gigabits, et aussi grâce à la bande passante du canal qui est environ 7 GHz. L'utilisation de cette bande de fréquence nécessite un protocole MAC qui assure le partage de canal entre les utilisateurs dans un réseau multi-noeuds. Ce protocole doit tenir compte les problèmes et les défis qui se produisent grâce à l'utilisation de la bande 60 GHz, tel que les problèmes des terminales cachées et exposées Dans ce projet on a proposé une méthode qui se base sur l'adaptation de protocole 802.llad avec la méthode 'Busy-Tone 'parce qu'elle représente la solution la plus efficace pour résoudre les problèmes des collisions des paquets de donnés et les paquets de contrôle qui sont causés normalement par la présence des terminales cachées et exposées. L'approche proposée consiste aussi à utiliser les antennes directives qm augmentent la réutilisation spatiale et couvre une portée plus grande par rapport à l'antenne omnidirectionnelle. Ces antennes ont été utilisées à côté des antennes omnidirectionnelles avec une coordination entre les deux, alors les antennes omnidirectionnelles sont utilisées pour envoyer les signaux 'Busy-Tone ' tandis que les antennes directives sont utilisées pour envoyer les paquets de données. Les résultats de la simulation ont montré une amélioration au niveau de la performance du réseau en terme du débit, du délai et les essaies de retransmission en comparant avec le standard 801.11ad. La mise en oeuvre est effectuée dans le logiciel Matlab/Simulink. Les paramètres utilisés dans les simulations sont des valeurs typiques des centrales existantes ou prises dans la littérature. La conformité avec la littérature est réalisée grâce à une validation croisée progressive de chaque sous-ensemble et du système globa