High-throughput large-area plastic nanoelectronics

Large-area electronics (LAE) manufacturing has been a key focus of both academic and industrial research, especially within the last decade. The growing interest is born out of the possibility of adding attractive properties (flexibility, light weight or minimal thickness) at low cost to well-established technologies, such as photovoltaics, displays, sensors or enabling the realisation of emerging technologies such as wearable devices and the Internet of Things. As such there has been great progress in the development of materials specifically designed to be employed in solution processed (plastic) electronics, including organic, transparent metal oxide and nanoscale semiconductors, as well as progress in the deposition methods of these materials using low-cost high-throughput printing techniques, such as gravure printing, inkjet printing, and roll-to-roll vacuum deposition. Meanwhile, industry innovation driven by Moore’s law has pushed conventional silicon-based electronic components to the nanoscale. The processes developed for LAE must strive to reach these dimensions. Given that the complex and expensive patterning techniques employed by the semiconductor industry so far are not compatible with LAE, there is clearly a need to develop large-area high throughput nanofabrication techniques. This thesis presents progress in adhesion lithography (a-Lith), a nanogap electrode fabrication process that can be applied over large areas on arbitrary substrates. A-Lith is a self-alignment process based on the alteration of surface energies of a starting metal electrode which allows the removal of any overlap of a secondary metal electrode. Importantly, it is an inexpensive, scalable and high throughput technique, and, especially if combined with low temperature deposition of the active material, it is fundamentally compatible with large-area fabrication of nanoscale electronic devices on flexible (plastic) substrates. Herein, I present routes towards process optimisation with a focus on gap size reduction and yield maximisation. Asymmetric gaps with sizes below 10 nm and yields of > 90 % for hundreds of electrode pairs generated on a single substrate are demonstrated. These large width electrode nanogaps represent the highest aspect ratio nanogaps (up to 108) fabricated to date. As a next step, arrays of Schottky nanodiodes are fabricated by deposition of a suitable semiconductor from solution into the nanogap structures. Of principal interest is the wide bandgap transparent semiconductor, zinc oxide (ZnO). Lateral ZnO Schottky diodes show outstanding characteristics, with on-off ratios of up to 106 and forward current values up to 10 mA for obtained upon combining a-Lith with low-temperature solution processing. These unique devices are further investigated for application in rectifier circuits, and in particular for potential use in radio frequency identification (RFID) tag technology. The ZnO diodes are found to surpass the 13.56 MHz frequency bernchmark used in commercial applications and approach the ultra-high frequency (UHF) band (hundreds of megahertz), outperforming current state of the art printed diodes. Solution processed fullerene (C60) is also shown to approach the UHF band in this co-planar device configuration, highlighting the viability of a-Lith for enabling large-area flexible radio frequency nanoelectronics. Finally, resistive switching memory device arrays based on a-Lith patterned nanogap aluminium symmetric electrodes are demonstrated for the first time. These devices are based either on empty aluminium nanogap electrodes, or with the gap filled with a solution-processed semiconductor, the latter being ZnO, the semiconducting polymer poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT) or carbon nanotube/polyfluorene blends. The switching mechanism, retention time and switching speed are investigated and compared with published data. The fabrication of arrays of these devices illustrates the potential of a-Lith as a simple technique for the realisation of large-area high-density memory applications.Open Acces

Diffusion of tin from TEC-8 conductive glass into mesoporous titanium dioxide in dye sensitized solar cells

The photoanode of a dye sensitized solar cell is typically a mesoporous titanium dioxide thin film adhered to a conductive glass plate. In the case of TEC-8 glass, an approximately 500 nm film of tin oxide provides the conductivity of this substrate. During the calcining step of photoanode fabrication, tin diffuses into the titanium dioxide layer. Scanning Electron Microscopy and Electron Dispersion Microscopy are used to analyze quantitatively the diffusion of tin through the photoanode. At temperatures (400 to 600 °C) and times (30 to 90 min) typically employed in the calcinations of titanium dioxide layers for dye sensitized solar cells, tin is observed to diffuse through several micrometers of the photoanode. The transport of tin is reasonably described using Fick\u27s Law of Diffusion through a semi-infinite medium with a fixed tin concentration at the interface. Numerical modeling allows for extraction of mass transport parameters that will be important in assessing the degree to which tin diffusion influences the performance of dye sensitized solar cells

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.Peer ReviewedPostprint (published version

Advances in Bioengineering

The technological approach and the high level of innovation make bioengineering extremely dynamic and this forces researchers to continuous updating. It involves the publication of the results of the latest scientific research. This book covers a wide range of aspects and issues related to advances in bioengineering research with a particular focus on innovative technologies and applications. The book consists of 13 scientific contributions divided in four sections: Materials Science; Biosensors. Electronics and Telemetry; Light Therapy; Computing and Analysis Techniques

Sewage sludge heavy metal analysis and agricultural prospects for Fiji

Insoluble residues produced in Waste Water Treatment Plants (WWTP) as by products are known as sewage sludge (SS). Land application of SS, particularly in agricultural lands, is becoming an alternative disposal method in Fiji. However, currently there is no legislative framework governing its use. SS together with its high nutrient and organic matter contents, constitutes some undesired pollutants such as heavy metals, which may limit its extensive use. The focus of this study therefore was to determine the total concentrations of Pb, Zn, Cd, Cu, Cr, Ni and Mn in the SS produced at the Kinoya WWTP (Fiji) and in the non-fertile soil amended with the SS at 20, 40, 60, 80% application rates and in the control (100% Soil). The bioavailable heavy metals were also determined as it depicts the true extent of metal contamination. The treatment mixtures were then used to cultivate cabbage plants in which the total heavy metal uptake was investigated. Total Zn (695.6 mg/kg) was present in the highest amounts in the 100% SS (control), followed by Pb (370.9 mg/kg), Mn (35.0 mg/kg), Cu (65.5 mg/kg), Cr (20.5 mg/kg) and finally Cd (13.5 mg/kg) and hence a similar trend was seen in all treatment mixtures. The potential mobility of sludgeborne heavy metals can be classified as Ni > Cu > Cd > Zn > Mn > Cr > Pb. Total metal uptake in plant leaves and stems showed only the bioavailable metals Cu, Cd, Zn and Mn, with maximum uptake occurring in the leaves. Ni, despite being highly mobile was not detected, due to minute concentrations in the SS treatments. Optimum growth occurred in the 20 and 40% SS treatments. However maximum Cu and Mn uptake occurred in the 40% SS treatment thereby making the 20% treatment the most feasible. Furthermore the total and bioavailable metal concentrations observed were within the safe and permitted limits of the EEC and USEPA legislations

Technology 2003: Conference Proceedings from the Fourth National Technology Transfer Conference and Exposition, Volume 1

Proceedings from symposia of the Technology 2003 Conference and Exposition, December 7-9, I993, Anaheim, CA. Volume 1 features the Plenary Session and the Plenary Workshop, plus papers presented in Advanced Manufacturing, Biotechnology/Medical Technology, Environmental Technology, Materials Science, and Power and Energy

Energy: A continuing bibliography with indexes

This bibliography lists 1920 reports, articles, and other documents introduced into the NASA Scientific and Technical Information System from July 1, 1980 through September 30, 1980