63,425 research outputs found
Catalase-based modified graphite electrode for hydrogen peroxide detection in different beverages
A catalase-based (NAF/MWCNTs) nanocomposite film modified glassy carbon electrode for hydrogen peroxide (H2O2) detection
was developed. The developed biosensor was characterized in terms of its bioelectrochemical properties. Cyclic voltammetry (CV)
technique was employed to study the redox features of the enzyme in the absence and in the presence of nanomaterials dispersed
in Nafion polymeric solution. The electron transfer coefficient, , and the electron transfer rate constant, , were found to be
0.42 and 1.71 s−1, at pH 7.0, respectively. Subsequently, the same modification steps were applied to mesoporous graphite screenprinted electrodes. Also, these electrodes were characterized in terms of their main electrochemical and kinetic parameters. The
biosensor performances improved considerably after modification with nanomaterials. Moreover, the association of Nafion with
carbon nanotubes retained the biological activity of the redox protein. The enzyme electrode response was linear in the range 2.5–
1150 mol L−1, with LOD of 0.83 mol L−1. From the experimental data, we can assess the possibility of using the modified biosensor
as a useful tool for H2O2 determination in packaged beverages
Physical and Electrochemical Area Determination of Electrodeposited Ni, Co, and NiCo Thin Films
The surface area of electrodeposited thin films of Ni, Co, and NiCo was
evaluated using electrochemical double-layer capacitance, electrochemical area
measurements using the [Ru(NH)]/[Ru(NH)] redox
couple, and topographic atomic force microscopy (AFM) imaging. These three
methods were compared to each other for each composition separately and for the
entire set of samples regardless of composition. Double-layer capacitance
measurements were found to be positively correlated to the roughness factors
determined by AFM topography. Electrochemical area measurements were found to
be less correlated with measured roughness factors as well as applicable only
to two of the three compositions studied. The results indicate that in situ
double-layer capacitance measurements are a practical, versatile technique for
estimating the accessible surface area of a metal sample.Comment: Accepted for publication in Nano Convergence, 6 figure
Evaluation of a sol–gel process for the synthesis of La1−xSrxMnO3+δ cathodic multilayers for solid oxide fuel cells
Solid oxide fuel cells (SOFCs) are electrical energy conversion devices with high efficiency and low pollution. In order to increase performances of SOFCs at intermediate temperature (700–800 °C) and to decrease materials cost, an alternative sol–gel synthesis method has been investigated to deposit La1−xSrxMnO3+δ (LSMx) as cathode thin films. Polycrystalline LSMx thin films were prepared by dip-coating using a polymeric solution. Lanthanum, strontium and manganese nitrates were used as raw materials. The viscosity of the solution was adjusted and the solution was deposited on polycrystalline ZrO2–8% Y2O3 ceramics. Prior to experiments, the substrate surface was eroded until a roughness of 20 nm and then cleaned with ethanol and dried. Film thicknesses were adjusted with the number of layers. Porosity and grain size of monolayers or multilayers were evaluated. Typical thickness of monolayer is 250 nm. A key parameter in the multilayer process was the intermediate calcination temperature (400, 700 or 1000 °C) of each further layer deposition. A correlation between this intermediate temperature and morphology, thickness and porosity was found; porosity is ranging from 3 to 40% and thickness can reach 1 micron for multilayers. Concerning electrochemical performances, the best results were obtained for LSM0.4 multilayers with an intermediate calcination temperature (called Ti) of 400 °C
Development of an Accelerated Test Method for the Determination of Susceptibility to Atmospheric Corrosion
The theoretical rationale is presented for use of a repetitive cyclic current reversal voltammetric technique for characterization of localized corrosion processes, including atmospheric corrosion. Applicability of this proposed experimental protocol is applied to characterization of susceptibility to crevice and pitting corrosion, atmospheric corrosion and stress corrosion cracking. Criteria upon which relative susceptibility is based were determined and tested using two iron based alloys commonly in use at NASA-Kennedy; A36 (a low carbon steel) and 4130 (a low alloy steel). Practicality of the procedure was demonstrated by measuring changes in anodic polarization behavior during high frequency current reversal cycles of 25 cycles per second with 1 mA/sq cm current density amplitude in solutions containing Cl anions. The results demonstrated that, due to excessive polarization which affects conductivity of barrier corrosion product layers, A36 was less resistant to atmospheric corrosion than its 4130 counterpart; behavior which was also demonstrated during exposure tests
Development of a Molecular-Imprinted-Polymer based sensor for the electrochemical determination of Triacetone Triperoxide (TATP)
.The explosive triacetone triperoxide (TATP), which can be prepared from commercially readily available reagents following an easy synthetic procedure, is one of the most common components of improvised explosive devices (IEDs). Molecularly-imprinted polymer (MIP) electrochemical sensors have proved useful for the determination of different compounds in different matrices with the required sensitivity and selectivity.
In this work, a highly sensitive and selective molecularly imprinted polymer with electrochemical capabilities for the determination of TATP has been developed. The molecular imprinting has been performed via electropolymerisation onto a glassy carbon electrode surface by cyclic voltammetry from a solution of pyrrole functional monomer, TATP template and LiClO4. Differential Pulse Voltammetry of TATP, with LiClO4 as supporting electrolyte, was performed in a potential range of −2.0 V to +1.0 V (vs. Ag/AgCl). Three-factor two-level factorial design was used to optimise the monomer concentration at 0.1 mol·L−1 , template concentration at 100 mmol·L−1 and the number of cyclic voltammetry scan cycles to 10. The molecularly imprinted polymer-modified glassy carbon electrode demonstrated good performance at low concentrations for a linear range of 82–44,300 µg·L−1 and a correlation coefficient of r2 = 0.996. The limits of detection (LoD) and quantification (LoQ) achieved were 26.9 μg·L−1 and 81.6 μg·L−1, respectively. The sensor demonstrated very good repeatability with precision values (n = 6, expressed as %RSD) of 1.098% and 0.55% for 1108 and 2216 µg·L−1 , respectively. It also proved selective for TATP in the presence of other explosive substances such as PETN, RDX,
HMX, and TNT
Carbon nanotube modified glassy carbon electrode for electrochemical oxidation of alkylphenol ethoxylate
Effect of sensitization on the electrochemical properties of nanostructured NiO
Screen-printed NiO electrodes were sensitized with 11 different dyes and the respective
electrochemical properties were analyzed in a three-electrode cell with the techniques of cyclic
voltammetry and electrochemical impedance spectroscopy. The dye sensitizers of NiO were organic
molecules of different types (e.g., squaraines, coumarins, and derivatives of triphenyl-amines and
erythrosine B), which were previously employed as sensitizers of the same oxide in dye-sensitized
solar cells of p-type (p-DSCs). Depending on the nature of the sensitizer, diverse types of interactions
occurred between the immobilized sensitizer and the screen-printed NiO electrode at rest and
under polarization. The impedance data recorded at open circuit potential were interpreted in
terms of two different equivalent circuits, depending on the eventual presence of the dye sensitizer
on the mesoporous electrode. The fitting parameter of the charge transfer resistance through the
electrode/electrolyte interface varied in accordance to the differences of the passivation action exerted
by the various dyes against the electrochemical oxidation of NiO. Moreover, it has been observed that
the resistive term RCT associated with the process of dark electron transfer between the dye and NiO
substrate is strictly correlated to the overall efficiency of the photoconversion () of the corresponding
p-DSC, which employs the same dye-sensitized electrode as photocathode
Review on carbon-derived, solid-state, micro and nano sensors for electrochemical sensing applications
The aim of this review is to summarize the most relevant contributions in the development of electrochemical sensors based on carbon materials in the recent years. There have been increasing numbers of reports on the first application of carbon derived materials for the preparation of an electrochemical sensor. These include carbon nanotubes, diamond like carbon films and diamond film-based sensors demonstrating that the particular structure of these carbon material and their unique properties make them a very attractive material for the design of electrochemical biosensors and gas sensors. Carbon nanotubes (CNT) have become one of the most extensively studied nanostructures because of their unique properties. CNT can enhance the electrochemical reactivity of important biomolecules and can promote the electron-transfer reactions of proteins (including those where the redox center is embedded deep within the glycoprotein shell). In addition to enhanced electrochemical reactivity, CNT-modified
electrodes have been shown useful to be coated with biomolecules (e.g., nucleic acids) and to alleviate surface fouling effects (such as those involved in the NADH oxidation process). The remarkable sensitivity of CNT conductivity with the surface adsorbates permits the use of CNT as highly sensitive nanoscale sensors.
These properties make CNT extremely attractive for a wide range of electrochemical sensors ranging from amperometric enzyme electrodes to DNA hybridization biosensors. Recently, a CNT sensor based fast diagnosis method using non-treated blood assay has been developed for specific detection of hepatitis B virus (HBV) (human liver diseases, such as chronic hepatitis, cirrhosis, and hepatocellular carcinoma caused by hepatitis B virus). The linear detection limits for HBV plasma is in the range 0.5–3.0 μL−1 and for anti-
HBVs 0.035–0.242 mg/mL in a 0.1 M NH4H2PO4 electrolyte solution. These detection limits enables early detection of HBV infection in suspected serum samples. Therefore, non-treated blood serum can be directly applied for real-time sensitive detection in medical diagnosis as well as in direct in vivo monitoring. Synthetic diamond has been recognized as an extremely attractive material for both (bio-) chemical sensing and as an interface to biological systems. Synthetic diamond have outstanding electrochemical properties,
superior chemical inertness and biocompatibility. Recent advances in the synthesis of highly conducting nanocrystalline-diamond thin films and nano wires have lead to an entirely new class of electrochemical biosensors and bio-inorganic interfaces. In addition, it also combines with development of new chemical approaches to covalently attach biomolecules on the diamond surface also contributed to the advancement of diamond-based biosensors. The feasibility of a capacitive field-effect EDIS (electrolyte-diamond-insulatorsemiconductor)
platform for multi-parameter sensing is demonstrated with an O-terminated nanocrystalline-diamond (NCD) film as transducer material for the detection of pH and penicillin concentration. This has also been extended for the label-free electrical monitoring of adsorption and binding of charged macromolecules. One more recent study demonstrated a novel bio-sensing platform, which is introduced
by combination of a) geometrically controlled DNA bonding using vertically aligned diamond nano-wires and b) the superior electrochemical sensing properties of diamond as transducer material. Diamond nanowires can be a new approach towards next generation electrochemical gene sensor platforms.
This review highlights the advantages of these carbon materials to promote different electron transfer reactions specially those related to biomolecules. Different strategies have been applied for constructing carbon material-based electrochemical sensors, their analytical performance and future prospects are
discussed
Discrimination of milks with a multisensor system based on layer-by-layer films
Producción CientÃficaA nanostructured electrochemical bi-sensor system for the analysis of milks has been developed using the layer-by-layer technique. The non-enzymatic sensor [CHI+IL/CuPcS]2, is a layered material containing a negative film of the anionic sulfonated copper phthalocyanine (CuPcS) acting as electrocatalytic material, and a cationic layer containing a mixture of an ionic liquid (IL) (1-butyl-3-methylimidazolium tetrafluoroborate) that enhances the conductivity, and chitosan (CHI), that facilitates the enzyme immobilization. The biosensor ([CHI+IL/CuPcS]2-GAO) results from the immobilization of galactose oxidase on the top of the LbL layers. FTIR, UV–vis, and AFM have confirmed the proposed structure and cyclic voltammetry has demonstrated the amplification caused by the combination of materials in the film. Sensors have been combined to form an electronic tongue for milk analysis. Principal component analysis has revealed the ability of the sensor system to discriminate between milk samples with different lactose content. Using a PLS-1 calibration models, correlations have been found between the voltammetric signals and chemical parameters measured by classical methods. PLS-1 models provide excellent correlations with lactose content. Additional information about other components, such as fats, proteins, and acidity, can also be obtained. The method developed is simple, and the short response time permits its use in assaying milk samples online.Ministerio de EconomÃa, Industria y Competitividad - Fondo Europeo de Desarrollo Regional (project AGL2015-67482-R)Junta de Castilla y Leon - Fondo Europeo de Desarrollo Regional (project VA-011U16)Junta de Castilla y León (grant BOCYL-D-4112015-9
- …