Acoustic telemetry.

Broadcasting messages through the earth is a daunting task. Indeed, broadcasting a normal telephone conversion through the earth by wireless means is impossible with todays technology. Most of us don't care, but some do. Industries that drill into the earth need wireless communication to broadcast navigation parameters. This allows them to steer their drill bits. They also need information about the natural formation that they are drilling. Measurements of parameters such as pressure, temperature, and gamma radiation levels can tell them if they have found a valuable resource such as a geothermal reservoir or a stratum bearing natural gas. Wireless communication methods are available to the drilling industry. Information is broadcast via either pressure waves in the drilling fluid or electromagnetic waves in the earth and well tubing. Data transmission can only travel one way at rates around a few baud. Given that normal Internet telephone modems operate near 20,000 baud, these data rates are truly very slow. Moreover, communication is often interrupted or permanently blocked by drilling conditions or natural formation properties. Here we describe a tool that communicates with stress waves traveling through the steel drill pipe and production tubing in the well. It's based on an old idea called Acoustic Telemetry. But what we present here is more than an idea. This tool exists, it's drilled several wells, and it works. Currently, it's the first and only acoustic telemetry tool that can withstand the drilling environment. It broadcasts one way over a limited range at much faster rates than existing methods, but we also know how build a system that can communicate both up and down wells of indefinite length

System data communication structures for active-control transport aircraft, volume 2

The application of communication structures to advanced transport aircraft are addressed. First, a set of avionic functional requirements is established, and a baseline set of avionics equipment is defined that will meet the requirements. Three alternative configurations for this equipment are then identified that represent the evolution toward more dispersed systems. Candidate communication structures are proposed for each system configuration, and these are compared using trade off analyses; these analyses emphasize reliability but also address complexity. Multiplex buses are recognized as the likely near term choice with mesh networks being desirable for advanced, highly dispersed systems

Audience Gatekeeping in the Twitter Service: An Investigation of Tweets about the 2009 Gaza Conflict

Twitter is a social news service in which information is selected and distributed by individual members of the tweet audience. While communication literature has studied traditional news media and the propagation of information, to our knowledge there have been no studies of the new social media and their impacts on the propagation of news during extreme event situations. This exploration attempts to build an understanding of how preexisting hyperlink structures on the Web and different types of information channels affect Twitter audiences’ information selection. The study analyzes the concentration of user-selected information sources in Twitter about the 2009 Israel-Gaza conflict. There are three findings. First, a statistical test of a power-law structure revealed that, while a wide range of information was selected and redistributed by Twitter users, the aggregation of these selections over-represented a small number of prominent websites. Second, binomial regression analyses showed that Twitter user selections were not constituted randomly but were affected by the number of hyperlinks received and the types of information channels. Third, temporal analyses revealed that sources via social media channels were more prominently selected especially in the later stages of the news information lifespan

Physical-Layer Cooperation in Coded OFDM Relaying Systems

Mobile communication systems nowadays require ever-increasing data rate and coverage of wide areas. One promising approach to achieve this goal is the application of cooperative communications enabled by introducing intermediate nodes known as relays to support the transmission between terminals. By processing and forwarding the receive message at the relays, the path-loss effect between the source and the destination is mitigated. One major limit factor for relay assisted communications is that a relay cannot transmit and receive using the same physical resources. Therefore, a half-duplex constraint is commonly assumed resulting in halved spectral efficiency. To combat this drawback, two-way relaying is introduced, where two sources exchange information with each. On the other hand, due to the physical limitation of the relays, e.g., wireless sensor nodes, it's not possible to implement multiple antennas at one relay, which prohibits the application of multiple-input multiple-output (MIMO) techniques. However, when treating multiple relays as a cluster, a virtual antenna array is formed to perform MIMO techniques in a distributed manner. %This thesis aims at designing efficient one-way and two-way relaying schemes. Specifically, existing schemes from the literature are improved and new schemes are developed with the emphasis on coded orthogonal frequency division multiplexing (OFDM) transmissions. Of special interest is the application of physical-layer network coding (PLNC) for two-phase two-way relaying. In this case, a network coded message is estimated from the superimposed receive signal at the relay using PLNC schemes. The schemes are investigated based on a mutual information analysis and their performance are improved by a newly proposed phase control strategy. Furthermore, performance degradation due to system asynchrony is mitigated depending on different PLNC schemes. When multiple relays are available, novel cooperation schemes allowing information exchange within the relay cluster are proposed that facilitate distributed MIMO reception and transmission. Additionally, smart signaling approaches are presented to enable the cooperation at different levels with the cooperation overhead taken into account adequately in system performance evaluation

Quantum Cryptography

Quantum cryptography could well be the first application of quantum mechanics at the individual quanta level. The very fast progress in both theory and experiments over the recent years are reviewed, with emphasis on open questions and technological issues.Comment: 55 pages, 32 figures; to appear in Reviews of Modern Physic

Collaborative modulation multiple access for single hop and multihop networks

While the bandwidth available for wireless networks is limited, the world has seen an unprecedented growth in the number of mobile subscribers and an ever increasing demand for high data rates. Therefore efficient utilisation of bandwidth to maximise link spectral efficiency and number of users that can be served simultaneously are primary goals in the design of wireless systems. To achieve these goals, in this thesis, a new non-orthogonal uplink multiple access scheme which combines the functionalities of adaptive modulation and multiple access called collaborative modulation multiple access (CMMA) is proposed. CMMA enables multiple users to access the network simultaneously and share the same bandwidth even when only a single receive antenna is available and in the presence of high channel correlation. Instead of competing for resources, users in CMMA share resources collaboratively by employing unique modulation sets (UMS) that differ in phase, power, and/or mapping structure. These UMS are designed to insure that the received signal formed from the superposition of all users’ signals belongs to a composite QAM constellation (CC) with a rate equal to the sum rate of all users. The CC and its constituent UMSs are designed centrally at the BS to remove ambiguity, maximize the minimum Euclidian distance (dmin) of the CC and insure a minimum BER performance is maintained. Users collaboratively precode their transmitted signal by performing truncated channel inversion and phase rotation using channel state information (CSI ) obtained from a periodic common pilot to insure that their combined signal at the BS belongs to the CC known at the BS which in turn performs a simple joint maximum likelihood detection without the need for CSI. The coherent addition of users’ power enables CMMA to achieve high link spectral efficiency at any time without extra power or bandwidth but on the expense of graceful degradation in BER performance. To improve the BER performance of CMMA while preserving its precoding and detection structure and without the need for pilot-aided channel estimation, a new selective diversity combining scheme called SC-CMMA is proposed. SC-CMMA optimises the overall group performance providing fairness and diversity gain for various users with different transmit powers and channel conditions by selecting a single antenna out of a group of L available antennas that minimises the total transmit power required for precoding at any one time. A detailed study of capacity and BER performance of CMMA and SC-CMMA is carried out under different level of channel correlations which shows that both offer high capacity gain and resilience to channel correlation. SC-CMMA capacity even increase with high channel correlation between users’ channels. CMMA provides a practical solution for implementing the multiple access adder channel (MAAC) in fading environments hence a hybrid approach combining both collaborative coding and modulation referred to as H-CMMA is investigated. H-CMMA divides users into a number of subgroups where users within a subgroup are assigned the same modulation set and different multiple access codes. H-CMMA adjusts the dmin of the received CC by varying the number of subgroups which in turn varies the number of unique constellation points for the same number of users and average total power. Therefore H-CMMA can accommodate many users with different rates while flexibly managing the complexity, rate and BER performance depending on the SNR. Next a new scheme combining CMMA with opportunistic scheduling using only partial CSI at the receiver called CMMA-OS is proposed to combine both the power gain of CMMA and the multiuser diversity gain that arises from users’ channel independence. To avoid the complexity and excessive feedback associated with the dynamic update of the CC, the BS takes into account the independence of users’ channels in the design of the CC and its constituent UMSs but both remain unchanged thereafter. However UMS are no longer associated with users, instead channel gain’s probability density function is divided into regions with identical probability and each UMS is associated with a specific region. This will simplify scheduling as users can initially chose their UMS based on their CSI and the BS will only need to resolve any collision when the channels of two or more users are located at the same region. Finally a high rate cooperative communication scheme, called cooperative modulation (CM) is proposed for cooperative multiuser systems. CM combines the reliability of the cooperative diversity with the high spectral efficiency and multiple access capabilities of CMMA. CM maintains low feedback and high spectral efficiency by restricting relaying to a single route with the best overall channel. Two possible variations of CM are proposed depending on whether CSI available only at the users or just at the BS and the selected relay. The first is referred to Precode, Amplify, and Forward (PAF) while the second one is called Decode, Remap, and Forward (DMF). A new route selection algorithm for DMF based on maximising dmin of random CC is also proposed using a novel fast low-complexity multi-stage sphere based algorithm to calculate the dmin at the relay of random CC that is used for both relay selection and detection

Towards LoRa mesh networks for the IoT

There are several LPWAN radio technologies providing wireless communication to the billions of connected devices that form the so-called IoT. Among them, LoRa has emerged in recent years as a popular solution for low power embedded devices to transmit data at long distances on a reduced energy budget. Most often, LoRa is used as the physical layer of LoRaWAN, an open standard that defines a MAC layer and specifies the star-of-stars topology, operation, roles and mechanisms for an integrated, full-stack IoT architecture. Nowadays, millions of devices use LoRaWAN networks in all sorts of agriculture, smart cities and buildings, industry, logistics and utilities scenarios. Despite its success in all sorts of IoT domains and environments, there are still use cases that would benefit from more flexible network topologies than LoRaWAN's star-of-stars. For instance, in scenarios where the deployment and operation of the backbone network infrastructure is technically or economically challenging, a more flexible model may improve certain performance metrics. As a first major contribution, this thesis investigates the effects of adding multi-hop capability to LoRaWAN, by means of the realistic use case of a communication system based on this architecture that provides a coordinated response in the aftermath of natural disasters like an earthquake. The capacity of end nodes to forward packets and perform multi-hop transmissions is explored, as a strategy to overcome gateway infrastructure failures, and analyzed for challenges, benefits and drawbacks in a massive system with thousands of devices. LoRa is also used as a stand-alone radio technology, independently from the LoRaWAN architecture. Its CSS modulation offers many advantages in LPWANs for IoT deployments. In particular, its different SFs available determine a trade-off between transmission time (i.e., data rate) and sensitivity (i.e., distance reach), and also generate quasi-orthogonal signals that can be demodulated concurrently by different receivers. The second major contribution of this thesis is the design of a minimalistic distance-vector routing protocol for embedded IoT devices featuring a LoRa transceiver, and the proposal of a path cost calculation metric that takes advantage of the multi-SF capability to reduce end-to-end transmission time. The protocol is evaluated through simulation and compared with other well-known routing strategies, analyzing and discussing its suitability for heterogeneous IoT LoRa mesh networks.Hi ha diverses tecnologies de ràdio LPWAN que proporcionen comunicació sense fils als milers de milions de dispositius connectats que conformen l'anomenada IoT. D'entre elles, LoRa ha emergit en els darrers anys com una solució popular per a què dispositius encastats amb pocs recursos transmetin dades a llargues distàncies amb un cost energètic reduït. Tot sovint, LoRa s'empra com la capa física de LoRaWAN, un estàndard obert que defineix una capa MAC i que especifica la topologia en estrella d'estrelles, l'operació, els rols i els mecanismes per implementar una arquitectura de la IoT integrada. A dia d'avui, milions de dispositius fan servir xarxes LoRaWAN en escenaris d'agricultura, edificis i ciutats intel·ligents, indústria, logística i subministraments. Malgrat el seu èxit en tot tipus d'entorns i àmbits de la IoT, encara romanen casos d'ús que es beneficiarien de topologies de xarxa més flexibles que l'estrella d'estrelles de LoRaWAN. Per exemple, en escenaris on el desplegament i l'operació de la infraestructura troncal de xarxa és tècnicament o econòmica inviable, una topologia més flexible podria millorar certs aspectes del rendiment. Com a primera contribució principal, en aquesta tesi s'investiguen els efectes d'afegir capacitat de transmissió multi-salt a LoRaWAN, mitjançant el cas d'ús realista d'un sistema de comunicació, basat en aquesta arquitectura, per proporcionar una resposta coordinada en els moments posteriors a desastres naturals, tals com un terratrèmol. En concret, s'explora l'estratègia d'afegir la capacitat de reenviar paquets als nodes finals per tal d'eludir les fallades en la infraestructura, i se n'analitzen els reptes, beneficis i inconvenients per a un sistema massiu amb milers de dispositius LoRa s'empra també com a tecnologia de ràdio de forma autònoma, independentment de l'arquitectura LoRaWAN. La seva modulació CSS li confereix molts avantatges en xarxes LPWAN per a desplegaments de la IoT. En particular, els diferents SFs disponibles hi determinen un compromís entre la durada de les transmissions (i.e., la taxa de dades) i la sensibilitat en la recepció (i.e., l'abast en distància), alhora que generen senyals quasi-ortogonals que poden ser desmodulades de forma concurrent per receptors diferents. La segona contribució principal d'aquesta tesi és el disseny d'un protocol d'encaminament dinàmic vector-distància per a dispositius de la IoT encastats amb un transceptor LoRa, i la proposta d'una mètrica per calcular el cost d'un camí que aprofita la capacitat multi-SF per minimitzar el temps de transmissió d'extrem a extrem. El protocol és avaluat mitjançant simulacions i comparat amb altres estratègies d'encaminament conegudes, analitzant la seva conveniència per a xarxes LoRa mallades per a la IoT.Existen varias tecnologías de radio LPWAN que proporcionan comunicación inalámbrica a los miles de millones de dispositivos conectados que forman el llamado IoT. De entre ellas, LoRa ha emergido en los últimos años como una solución popular para que dispositivos embebidos con pocos recursos transmitan datos a largas distancias con un coste energético reducido. Habitualmente, LoRa se usa como la capa física de LoRaWAN, un estándar abierto que define una capa MAC y que especi_ca la topología en estrella de estrellas, la operación, los roles y los mecanismos para implantar una arquitectura del IoT integrada. A día de hoy, millones de dispositivos utilizan redes LoRaWAN en escenarios de agricultura, edificios y ciudades inteligentes, industria, logística y suministros. A pesar de su éxito en todo tipo de entornos y ámbitos del IoT, existen casos de uso que se beneficiaran de topologías de red más flexibles que la estrella de estrellas de LoRaWAN. Por ejemplo, en escenarios en los que el despliegue y la operación de la infraestructura troncal de red es técnica o económicamente inviable, una topología más flexible podrá mejorar ciertos aspectos del rendimiento. Como primera contribución principal, en esta tesis se investigan los efectos de añadir capacidad de transmisión multi-salto a LoRaWAN, mediante el caso de uso realista de un sistema de comunicación basado en dicha arquitectura, para proporcionar una respuesta coordinada en los momentos posteriores a desastres naturales, tales como un terremoto. En concreto, se explora la estrategia de añadir la capacidad de reenviar paquetes a los nodos finales para sortear las fallas en la infraestructura, y se analizan los retos, beneficios e inconvenientes para un sistema masivo con miles de dispositivos. LoRa se usa también como tecnología de radio de forma autónoma, independientemente de la arquitectura LoRaWAN. Su modulación CSS le confiere muchas ventajas en redes LPWAN para despliegues de IoT. En particular, los distintos SFs disponibles determinan un compromiso entre la duración de las transmisiones (i.e., la tasa de datos) y la sensibilidad en la recepción (i.e., el alcance en distancia), a la vez que generan señales cuasi-ortogonales que pueden ser desmoduladas de forma concurrente por receptores distintos. En segundo lugar, esta tesis contiene el diseño de un protocolo de enrutamiento dinámico vector-distancia para dispositivos Internet of Things (IoT) embebidos con un transceptor LoRa, y propone una métrica para calcular el coste de un camino que aprovecha la capacidad multi-SF para minimizar el tiempo de transmisión de extremo a extremo. El protocolo es evaluado y comparado con otras estrategias de enrutamiento conocidas, analizando su conveniencia para redes LoRa malladas para el IoT.Postprint (published version

LDPC code-based bandwidth efficient coding schemes for wireless communications

This dissertation deals with the design of bandwidth-efficient coding schemes with Low-Density Parity-Check (LDPC) for reliable wireless communications. Code design for wireless channels roughly falls into three categories: (1) when channel state information (CSI) is known only to the receiver (2) more practical case of partial CSI at the receiver when the channel has to be estimated (3) when CSI is known to the receiver as well as the transmitter. We consider coding schemes for all the above categories. For the first scenario, we describe a bandwidth efficient scheme which uses highorder constellations such as QAM over both AWGN as well as fading channels. We propose a simple design with LDPC codes which combines the good properties of Multi-level Coding (MLC) and bit-interleaved coded-modulation (BICM) schemes. Through simulations, we show that the proposed scheme performs better than MLC for short-medium lengths on AWGN and block-fading channels. For the first case, we also characterize the rate-diversity tradeoff of MIMO-OFDM and SISO-OFDM systems. We design optimal coding schemes which achieve this tradeoff when transmission is from a constrained constellation. Through simulations, we show that with a sub-optimal iterative decoder, the performance of this coding scheme is very close to the optimal limit for MIMO (flat quasi-static fading), MIMO-OFDM and SISO OFDM systems. For the second case, we design non-systematic Irregular Repeat Accumulate (IRA) codes, which are a special class of LDPC codes, for Inter-Symbol Interference (ISI) fading channels when CSI is estimated at the receiver. We use Orthogonal Frequency Division Multiplexing (OFDM) to convert the ISI fading channel into parallel flat fading subchannels. We use a simple receiver structure that performs iterative channel estimation and decoding and use non-systematic IRA codes that are optimized for this receiver. This combination is shown to perform very close to a receiver with perfect CSI and is also shown to be robust to change in the number of channel taps and Doppler. For the third case, we look at bandwidth efficient schemes for fading channels that perform close to capacity when the channel state information is known at the transmitter as well as the receiver. Schemes that achieve capacity with a Gaussian codebook for the above system are already known but not for constrained constellations. We derive the near-optimum scheme to achieve capacity with constrained constellations and then propose coding schemes which perform close to capacity. Through linear transformations, a MIMO system can be converted into non-interfering parallel subchannels and we further extend the proposed coding schemes to the MIMO case too