Modeling the pulse signal by wave-shape function and analyzing by synchrosqueezing transform

We apply the recently developed adaptive non-harmonic model based on the wave-shape function, as well as the time-frequency analysis tool called synchrosqueezing transform (SST) to model and analyze oscillatory physiological signals. To demonstrate how the model and algorithm work, we apply them to study the pulse wave signal. By extracting features called the spectral pulse signature, {and} based on functional regression, we characterize the hemodynamics from the radial pulse wave signals recorded by the sphygmomanometer. Analysis results suggest the potential of the proposed signal processing approach to extract health-related hemodynamics features

Acoustic sensing as a novel approach for cardiovascular monitoring at the wrist

Cardiovascular diseases are the number one cause of deaths globally. An increased cardiovascular risk can be detected by a regular monitoring of the vital signs including the heart rate, the heart rate variability (HRV) and the blood pressure. For a user to undergo continuous vital sign monitoring, wearable systems prove to be very useful as the device can be integrated into the user's lifestyle without affecting the daily activities. However, the main challenge associated with the monitoring of these cardiovascular parameters is the requirement of different sensing mechanisms at different measurement sites. There is not a single wearable device that can provide sufficient physiological information to track the vital signs from a single site on the body. This thesis proposes a novel concept of using acoustic sensing over the radial artery to extract cardiac parameters for vital sign monitoring. A wearable system consisting of a microphone is designed to allow the detection of the heart sounds together with the pulse wave, an attribute not possible with existing wrist-based sensing methods. Methods: The acoustic signals recorded from the radial artery are a continuous reflection of the instantaneous cardiac activity. These signals are studied and characterised using different algorithms to extract cardiovascular parameters. The validity of the proposed principle is firstly demonstrated using a novel algorithm to extract the heart rate from these signals. The algorithm utilises the power spectral analysis of the acoustic pulse signal to detect the S1 sounds and additionally, the K-means method to remove motion artifacts for an accurate heartbeat detection. The HRV in the short-term acoustic recordings is found by extracting the S1 events using the relative information between the short- and long-term energies of the signal. The S1 events are localised using three different characteristic points and the best representation is found by comparing the instantaneous heart rate profiles. The possibility of measuring the blood pressure using the wearable device is shown by recording the acoustic signal under the influence of external pressure applied on the arterial branch. The temporal and spectral characteristics of the acoustic signal are utilised to extract the feature signals and obtain a relationship with the systolic blood pressure (SBP) and diastolic blood pressure (DBP) respectively. Results: This thesis proposes three different algorithms to find the heart rate, the HRV and the SBP/ DBP readings from the acoustic signals recorded at the wrist. The results obtained by each algorithm are as follows: 1. The heart rate algorithm is validated on a dataset consisting of 12 subjects with a data length of 6 hours. The results demonstrate an accuracy of 98.78%, mean absolute error of 0.28 bpm, limits of agreement between -1.68 and 1.69 bpm, and a correlation coefficient of 0.998 with reference to a state-of-the-art PPG-based commercial device. A high statistical agreement between the heart rate obtained from the acoustic signal and the photoplethysmography (PPG) signal is observed. 2. The HRV algorithm is validated on the short-term acoustic signals of 5-minutes duration recorded from each of the 12 subjects. A comparison is established with the simultaneously recorded electrocardiography (ECG) and PPG signals respectively. The instantaneous heart rate for all the subjects combined together achieves an accuracy of 98.50% and 98.96% with respect to the ECG and PPG signals respectively. The results for the time-domain and frequency-domain HRV parameters also demonstrate high statistical agreement with the ECG and PPG signals respectively. 3. The algorithm proposed for the SBP/ DBP determination is validated on 104 acoustic signals recorded from 40 adult subjects. The experimental outputs when compared with the reference arm- and wrist-based monitors produce a mean error of less than 2 mmHg and a standard deviation of error around 6 mmHg. Based on these results, this thesis shows the potential of this new sensing modality to be used as an alternative, or to complement existing methods, for the continuous monitoring of heart rate and HRV, and spot measurement of the blood pressure at the wrist.Open Acces

NADI PARIKSHA: WRIST PULSE ANALYSIS WITH TRADITIONAL AND MODERN INTERPRETATION

Nadi Pariksha (Pulse diagnosis) is considered the most important assessment in Traditional Medicine System (TMS) for health monitoring. Traditional pulse analysis is subjective and hard to quantify. It is difficult for a Ayurvedic doctor to understand the pulse by his own perception due to its arbitrariness. To realize due recognition of TMS, standard techniques and standard instruments are urgently to be developed. In view of the increasing popularity of traditional and alternative medicine worldwide, researchers have explored pulse sensing and analysis, but due to the conflict of research goals, methodologies and statistical tools applied, the outcome of studies till date is not focused in one direction. This study explores current status of pulse signal interpretation by researchers using latest electronic signal processing techniques in recent years. The aim of research is towards development of pulse sensing and analyzing techniques using latest technology to assist or help Ayurvedic doctors, in a way to promote our countrys traditional pulse sensing. Since no sensor is benchmarked as a standard in wrist pulse sensing till date, various sensors were explored to sense wrist pulse and the results were correlated with the recent research. Optical sensor HOA 709 in reflective mode, exhibited best results, it captured the minute details and was used to acquire pulse signal of healthy subjects at Pita point on radial artery. The sensor was explored further to record pre-meal and post-meal data of two subjects and significant variation in signal contour was noticed. It can further be explored to extract more parameters with the help of Ayurvedic doctors to make it useful in health care.

Three-dimensional instabilities and transition of steady and pulsatile axisymmetric stenotic flows

Published versio

Acoustic sensing as a novel wearable approach for cardiac monitoring at the wrist

This paper introduces the concept of using acoustic sensing over the radial artery to extract cardiac parameters for continuous vital sign monitoring. It proposes a novel measurement principle that allows detection of the heart sounds together with the pulse wave, an attribute not possible with existing photoplethysmography (PPG)-based methods for monitoring at wrist. The validity of the proposed principle is demonstrated using a new miniature, battery-operated wearable device to sense the acoustic signals and a novel algorithm to extract the heart rate from these signals. The algorithm utilizes the power spectral analysis of the acoustic pulse signal to detect the S1 sounds and additionally, the K-means method to remove motion artifacts for an accurate heartbeat detection. It has been validated on a dataset consisting of 12 subjects with a data length of 6 hours. The results demonstrate an accuracy of 98.78\%, mean absolute error of 0.28 bpm, limits of agreement between -1.68 and 1.69 bpm, and a correlation coefficient of 0.998 with reference to a state-of-the-art PPG-based commercial device. The results in this proof of concept study demonstrate the potential of this new sensing modality to be used as an alternative, or to complement existing methods, for continuous monitoring of heart rate at wrist

Development of pulse diagnostic devices in Korea

AbstractIn Korean medicine, pulse diagnosis is one of the important methods for determining the health status of a patient. For over 40 years, electromechanical pulse diagnostic devices have been developed to objectify and quantify pulse diagnoses. In this paper, we review previous research and development for pulse diagnostic devices according to various fields of study: demand analysis and current phase, literature studies, sensors, actuators, systems, physical quantity studies, clinical studies, and the U-health system. We point out some confusing issues that have been naively accepted without strict verification: original pressure pulse waveform and derivative pressure pulse waveform, pressure signals and other signal types, and minutely controlled pressure exertion issues. We then consider some technical and clinical issues to achieve the development of a pulse diagnostic device that is appropriate both technically and in terms of Korean medicine. We hope to show the history of pulse diagnostic device research in Korea and propose a proper method to research and develop these devices

대규모 인구 모델과 단일 가슴 착용형 장치를 활용한 비침습적 연속 동맥 혈압 모니터링 시스템

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 협동과정 바이오엔지니어링전공, 2021. 2. 김희찬.최근 수십 년 동안 비침습적 연속 혈압 모니터링에 대한 필요성이 점차 대두되면서 맥파 전달 시간, 맥파 도달 시간, 또는 광용적맥파의 파형으로부터 추출된 다양한 특징들을 이용한 혈압 추정 연구들이 전세계적으로 활발하게 진행되었다. 하지만 대부분의 연구들은 국제 혈압 표준을 만족시키지 못하는 매우 적은 수의 피험자들 만을 대상으로 주로 혈압 추정 모델을 개발 및 검증하였기 때문에 성능의 정확도가 적절하게 검증되지 못했다는 한계점이 있었고, 또한 혈압 추정 파라미터 추출을 위한 생체 신호들을 측정하기 위해 대부분 두 개 이상의 모듈을 필요로 하면서 실용성 측면에서 한계점이 있었다. 첫 번째 연구는 대규모 생체신호 데이터베이스들을 분석함으로써 임상적으로 허용 가능한 수준의 정확도가 적절히 검증된 혈압 추정 모델을 개발하는 것을 목적으로 진행되었다. 본 연구에서는 1376명의 수술 중 환자들의 약 250만 심박 주기에 대해 측정된 두 가지 비침습적 생체신호인 심전도와 광용적맥파를 활용한 혈압 추정 방식들을 분석하였다. 맥파 도달 시간, 심박수, 그리고 다양한 광용적맥파 파형 피처들을 포함하는 총 42 종류의 파라미터들을 대상으로 피처 선택 기법들을 적용한 결과, 28개의 피처들이 혈압 추정 파라미터로 결정되었고, 특히 두 가지 광용적맥파 피처들이 기존에 혈압 추정 파라미터로 가장 주요하게 활용되었던 맥파 도달 시간보다 우월한 파라미터들로 분석되었다. 선정된 파라미터들을 활용하여 혈압의 낮은 주파수 성분을 인공신경망으로 모델링하고, 높은 주파수 성분을 순환신경망으로 모델링 한 결과, 수축기 혈압 에러율 0.05 ± 6.92 mmHg와 이완기 혈압 에러율 -0.05 ± 3.99 mmHg 정도의 높은 정확도를 달성하였다. 또 다른 생체신호 데이터베이스에서 추출한 334명의 중환자들을 대상으로 모델을 외부 검증했을 때 유사한 결과를 획득하면서 세 가지 대표적 혈압 측정 장비 기준들을 모두 만족시켰다. 해당 결과를 통해 제안된 혈압 추정 모델이 1000명 이상의 다양한 피험자들을 대상으로 적용 가능함을 확인하였다. 두 번째 연구는 일상 생활 중 장기간 모니터링이 가능한 단일 착용형 혈압 모니터링 시스템을 개발하는 것을 목적으로 진행되었다. 대부분의 기존 혈압 추정 연구들은 혈압 추정 파라미터 추출을 위해 필요한 생체신호들을 측정하기 위해 두 군데 이상의 신체 지점에 두 개 이상의 모듈을 부착하는 등 실용성 측면에서 한계를 나타냈다. 이를 해결하기 위해 본 연구에서는 심전도와 광용적맥파를 동시에 연속적으로 측정하는 단일 가슴 착용형 디바이스를 개발하였고, 개발된 디바이스를 대상으로 총 25명의 건강한 피험자들로부터 데이터를 획득하였다. 손가락에서 측정된 광용적맥파와 가슴에서 측정된 광용적맥파 간 파형의 특성에 유의미한 차이가 있기 때문에 가슴에서 측정된 광용적맥파에서 추출된 피처들을 대응되는 손가락에서 측정된 광용적맥파 피처들로 특성을 변환하는 전달 함수 모델을 개발하였다. 25명으로부터 획득한 데이터에 전달 함수 모델을 적용시킨 후 혈압 추정 모델을 검증한 결과, 수축기 혈압 에러율 0.54 ± 7.47 mmHg와 이완기 혈압 에러율 0.29 ± 4.33 mmHg로 나타나면서 세 가지 혈압 측정 장비 기준들을 모두 만족시켰다. 결론적으로 본 연구에서는 임상적으로 허용 가능한 수준의 정확도로 장기간 일상 생활이 가능한 비침습적 연속 동맥 혈압 모니터링 시스템을 개발하고 다수의 데이터셋을 대상으로 검증함으로써 고혈압 조기 진단 및 예방을 위한 모바일 헬스케어 서비스의 가능성을 확인하였다.As non-invasive continuous blood pressure monitoring (NCBPM) has gained wide attraction in the recent decades, many studies on blood pressure (BP) estimation using pulse transit time (PTT), pulse arrival time (PAT), and characteristics extracted from the morphology of photoplethysmogram (PPG) waveform as indicators of BP have been conducted. However, most of the studies have used small homogeneous subject pools to generate models of BP, which led to inconsistent results in terms of accuracy. Furthermore, the previously proposed modalities to measure BP indicators are questionable in terms of practicality, and lack the potential for being utilized in daily life. The first goal of this thesis is to develop a BP estimation model with clinically valid accuracy using a large pool of heterogeneous subjects undergoing various surgeries. This study presents analyses of BP estimation methods using 2.4 million cardiac cycles of two commonly used non-invasive biosignals, electrocardiogram (ECG) and PPG, from 1376 surgical patients. Feature selection methods were used to determine the best subset of predictors from a total of 42 including PAT, heart rate, and various PPG morphology features. BP estimation models were constructed using linear regression, random forest, artificial neural network (ANN), and recurrent neural network (RNN), and the performances were evaluated. 28 features out of 42 were determined as suitable for BP estimation, in particular two PPG morphology features outperformed PAT, which has been conventionally seen as the best non-invasive indicator of BP. By modelling the low frequency component of BP using ANN and the high frequency component using RNN with the selected predictors, mean errors of 0.05 ± 6.92 mmHg for systolic blood pressure (SBP), and -0.05 ± 3.99 mmHg for diastolic blood pressure (DBP) were achieved. External validation of the model using another biosignal database consisting of 334 intensive care unit patients led to similar results, satisfying three international standards concerning the accuracy of BP monitors. The results indicate that the proposed method can be applied to large number of subjects and various subject phenotypes. The second goal of this thesis is to develop a wearable BP monitoring system, which facilitates NCBPM in daily life. Most previous studies used two or more modules with bulky electrodes to measure biosignals such as ECG and PPG for extracting BP indicators. In this study, a single wireless chest-worn device measuring ECG and PPG simultaneously was developed. Biosignal data from 25 healthy subjects measured by the developed device were acquired, and the BP estimation model developed above was tested on this data after applying a transfer function mapping the chest PPG morphology features to the corresponding finger PPG morphology features. The model yielded mean errors of 0.54 ± 7.47 mmHg for SBP, and 0.29 ± 4.33 mmHg for DBP, again satisfying the three standards for the accuracy of BP monitors. The results indicate that the proposed system can be a stepping stone to the realization of mobile NCBPM in daily life. In conclusion, the clinical validity of the proposed system was checked in three different datasets, and it is a practical solution to NCBPM due to its non-occlusive form as a single wearable device.Abstract i Contents iv List of Tables vii List of Figures viii Chapter 1 General Introduction 1 1.1 Need for Non-invasive Continuous Blood Pressure Monitoring (NCBPM) 2 1.2 Previous Studies for NCBPM 5 1.3 Issues with Previous Studies 9 1.4 Thesis Objectives 12 Chapter 2 Non-invasive Continuous Arterial Blood Pressure Estimation Model in Large Population 14 2.1 Introduction 15 2.1.1 Electrocardiogram (ECG) and Photoplethysmogram (PPG) Features for Blood Pressure (BP) Estimation 15 2.1.2 Description of Surgical Biosignal Databases 16 2.2 Feature Analysis 19 2.2.1 Data Acquisition and Data Pre-processing 19 2.2.2 Feature Extraction 25 2.2.3 Feature Selection 35 2.3 Construction of the BP Estimation Models 44 2.3.1 Frequency Component Separation 44 2.3.2 Modelling Algorithms 47 2.3.3 Summary of Training and Validation 52 2.4 Results and Discussion 54 2.4.1 Feature Analysis 54 2.4.1.1 Pulse Arrival Time versus Pulse Transit Time 54 2.4.1.2 Feature Selection 57 2.4.2 Optimization of the BP Estimation Models 63 2.4.2.1 Frequency Component Separation 63 2.4.2.2 Modelling Algorithms 66 2.4.2.3 Comparison against Different Modelling Settings 68 2.4.3 Performance of the Best-case BP Estimation Model 69 2.4.4 Limitations 75 2.5 Conclusion 78 Chapter 3 Development of the Single Chest-worn Device for Non-invasive Continuous Arterial Blood Pressure Monitoring 80 3.1 Introduction 81 3.2 Development of the Single Chest-worn Device 84 3.2.1 Hardware Development 84 3.2.2 Software Development 90 3.2.3 Clinical Trial 92 3.3 Development of the Transfer Function 95 3.3.1 Finger PPG versus Chest PPG 95 3.3.2 The Concept of the Transfer Function 97 3.3.3 Data Acquisition for Modelling of the Transfer Function 98 3.4 Results and Discussion 100 3.4.1 Construction of the Transfer Function 100 3.4.2 Test of the BP Estimation Model 101 3.4.3 Comparison with the Previous Study using the Single Chest-worn Device 104 3.4.4 Limitations 106 3.5 Conclusion 108 Chapter 4 Thesis Summary and Future Direction 109 4.1 Summary and Contributions 110 4.2 Future Work 113 Bibliography 115 Abstract in Korean 129 Acknowledgement 132Docto