Evaluation of Two Terminal Reliability of Fault-tolerant Multistage Interconnection Networks

This paper iOntroduces a new method based on multi-decomposition for predicting the two terminal reliability of fault-tolerant multistage interconnection networks. The method is well supported by an efficient algorithm which runs polynomially. The method is well illustrated by taking a network consists of eight nodes and twelve links as an example. The proposed method is found to be simple, general and efficient and thus is as such applicable to all types of fault-tolerant multistage interconnection networks. The results show this method provides a greater accurate probability when applied on fault-tolerant multistage interconnection networks. Reliability of two important MINs are evaluated by using the proposed method

Tolerating multiple faults in multistage interconnection networks with minimal extra stages

Adams and Siegel (1982) proposed an extra stage cube interconnection network that tolerates one switch failure with one extra stage. We extend their results and discover a class of extra stage interconnection networks that tolerate multiple switch failures with a minimal number of extra stages. Adopting the same fault model as Adams and Siegel, the faulty switches can be bypassed by a pair of demultiplexer/multiplexer combinations. It is easy to show that, to maintain point to point and broadcast connectivities, there must be at least S extra stages to tolerate I switch failures. We present the first known construction of an extra stage interconnection network that meets this lower-bound. This 12-dimensional multistage interconnection network has n+f stages and tolerates I switch failures. An n-bit label called mask is used for each stage that indicates the bit differences between the two inputs coming into a common switch. We designed the fault-tolerant construction such that it repeatedly uses the singleton basis of the n-dimensional vector space as the stage mask vectors. This construction is further generalized and we prove that an n-dimensional multistage interconnection network is optimally fault-tolerant if and only if the mask vectors of every n consecutive stages span the n-dimensional vector space

Multistage interconnection networks : improved routing algorithms and fault tolerance

Multistage interconnection networks for use by multiprocessor systems are optimal in terms of the number of switching element, but the routing algorithms used to set up these networks are suboptimal in terms of time. The network set-up time and reliability are the major factors to affect the performance of multistage interconnection networks. This work improves routing on Benes and Clos networks as well as the fault tolerant capability. The permutation representation is examined as well as the Clos and Benes networks. A modified edge coloring algorithm is applied to the regular bipartite multigraph which represents a Clos network. The looping and parallel looping algorithms are examined and a modified Tree-Connected Computer is adopted to execute a bidirectional parallel looping algorithm for Benes networks. A new fault tolerant Clos network is presented

Fault tolerant clos network

Multistage interconnection networks, or MINs, provide paths between functional modules in multiprocessor systems. The MINs are usually segmented into several stages. Each stage connects inputs to appropriate links of the next stage so that the cumulative effect of all the stages satisfies input-output connection requirements. This thesis deals with a fault tolerant Clos network. The fault tolerance technique involves addition of extra switches per stage to compensate for any switch failure The reliability analysis of both ordinary and fault tolerant Clos networks is presented. The optimal number of extra switches required to get the best reliability results has been analyzed

Modeling and Analysis of Fault Tolerant Multistage Interconnection Networks

Performance and reliability are two of the most crucial issues in today\u27s high-performance instrumentation and measurement systems. High speed and compact density multistage interconnection networks (MINs) are widely-used subsystems in different applications. New performance models are proposed to evaluate a novel fault tolerant MIN arrangement, thereby assuring performance and reliability with high confidence level. A concurrent fault detection and recovery scheme for MINs is considered by rerouting over redundant interconnection links under stringent real-time constraints for digital instrumentation as sensor networks. A switch architecture for concurrent testing and diagnosis is proposed. New performance models are developed and used to evaluate the compound effect of fault tolerant operation (inclusive of testing, diagnosis, and recovery) on the overall throughput and delay. Results are shown for single transient and permanent stuck-at faults on links and storage units in the switching elements. It is shown that performance degradation due to fault tolerance is graceful while performance degradation without fault recovery is unacceptable

A Switch Architecture for Real-Time Multimedia Communications

In this paper we present a switch that can be used to transfer multimedia type of trafJic. The switch provides a guaranteed throughput and a bounded latency. We focus on the design of a prototype Switching Element using the new technology opportunities being offered today. The architecture meets the multimedia requirements but still has a low complexity and needs a minimum amount of hardware. A main item of this paper will be the background of the architectural design decisions made. These include the interconnection topology, buffer organization, routing and scheduling. The implementation of the switching fabric with FPGAs, allows us to experiment with switching mode, routing strategy and scheduling policy in a multimedia environment. The witching elements are interconnected in a Kautz topology. Kautz graphs have interesting properties such as: a small diametec the degree is independent of the network size, the network is fault-tolerant and has a simple routing algorithm

Fault-tolerant onboard digital information switching and routing for communications satellites

The NASA Lewis Research Center is developing an information-switching processor for future meshed very-small-aperture terminal (VSAT) communications satellites. The information-switching processor will switch and route baseband user data onboard the VSAT satellite to connect thousands of Earth terminals. Fault tolerance is a critical issue in developing information-switching processor circuitry that will provide and maintain reliable communications services. In parallel with the conceptual development of the meshed VSAT satellite network architecture, NASA designed and built a simple test bed for developing and demonstrating baseband switch architectures and fault-tolerance techniques. The meshed VSAT architecture and the switching demonstration test bed are described, and the initial switching architecture and the fault-tolerance techniques that were developed and tested are discussed