Hierarchical fault tolerance in wireless networked control systems

Wireless Networked Control Systems (WNCS) have recently emerged as a replacement for wired control networks. Wireless networked control systems are more suitable for environments that require higher flexibility and robustness. In previous literature a wireless manufacturing line was proposed. The work-cells communication was through IEEE 802.11 technologies and a switched Ethernet backbone. This thesis is aiming to improve the current solution by adding a supervisor to the existing system. The supervisor could be either in passive or active mode. Passive supervisor would intervene when all controllers in the network fail, while active supervisor would act once any controller on the line fail. The system was simulated using OPNET software with 95% confidence analysis. The ability of the system to withstand external interference was assessed through adding a single band jammer to the OPNET simulation. The system was able to hold up to 8KB interfering file sent from a single band jammer affecting the full Wi-Fi spectrum. All results were subjected to a 95% confidence analysis The performability of passive and active supervisor systems was compared. A Markov model of both systems was built. It was shown that by time, the performability of a passive supervisor system is enhanced while that of an active supervisor system degraded. However, the active supervisor showed a better performability in all cases

Networked control systems for intelligent transportation systems and industrial automation

This thesis presents a study of two different applications of Networked Control Systems. The first is: Ethernet Networked Control System On-board of Train-wagons. An Ethernet backbone is shared between control and entertainment. The wagon contains a dedicated control server and a dedicated entertainment server, which act as fault-tolerant machines for one another. In the event of a server failure, the remaining machine can serve both entertainment and/or control. The study aims at enhancing system design in order to maximize the tolerable entertainment load in the event of a control/entertainment server failure, while not causing any control violations. This fault-tolerant system is mathematically analyzed using a performability model to relate failure rates, enhancements and rewards. The model is taken further to test two identical wagons, with a total of four fault-tolerant servers. All possible failure sequences are simulated and a different communication philosophy is tested to further minimize the degradation of the entertainment load supported during the failure of up to three of the four servers. The system is shown to be capable of operating with minimal degradation with one out of four servers. The second is: Wireless Networked Control Systems (WNCS) for Industrial Automation. A WNCS using standard 802.11 and 802.3 protocols for communication is presented. Wireless Interface for Sensors and Actuators (WISA) by ABB is used as a benchmark for comparison. The basic unit is a single workcell, however, there is a need to cascade several cells along a production line. Simulations are conducted and a nontraditional allocation scheme is used to ensure correct operation under the effect of co-channel interference and network congestion. Next, fault-tolerance at the controller level is investigated due to the importance of minimizing downtime resulting from controller failure. Two different techniques of interconnecting neighboring cells are investigated. The study models both a two and three-cell scenario, and all systems show that fault-tolerance is achievable. This is mathematically studied using a performability analysis to relate failure rates with rewards at each failure state. All simulations are conducted on OPNET Network Modeler and results are subjected to a 95% confidence analysis

Software Defined Networks based Smart Grid Communication: A Comprehensive Survey

The current power grid is no longer a feasible solution due to ever-increasing user demand of electricity, old infrastructure, and reliability issues and thus require transformation to a better grid a.k.a., smart grid (SG). The key features that distinguish SG from the conventional electrical power grid are its capability to perform two-way communication, demand side management, and real time pricing. Despite all these advantages that SG will bring, there are certain issues which are specific to SG communication system. For instance, network management of current SG systems is complex, time consuming, and done manually. Moreover, SG communication (SGC) system is built on different vendor specific devices and protocols. Therefore, the current SG systems are not protocol independent, thus leading to interoperability issue. Software defined network (SDN) has been proposed to monitor and manage the communication networks globally. This article serves as a comprehensive survey on SDN-based SGC. In this article, we first discuss taxonomy of advantages of SDNbased SGC.We then discuss SDN-based SGC architectures, along with case studies. Our article provides an in-depth discussion on routing schemes for SDN-based SGC. We also provide detailed survey of security and privacy schemes applied to SDN-based SGC. We furthermore present challenges, open issues, and future research directions related to SDN-based SGC.Comment: Accepte

On cost-effective reuse of components in the design of complex reconfigurable systems

Design strategies that benefit from the reuse of system components can reduce costs while maintaining or increasing dependability—we use the term dependability to tie together reliability and availability. D3H2 (aDaptive Dependable Design for systems with Homogeneous and Heterogeneous redundancies) is a methodology that supports the design of complex systems with a focus on reconfiguration and component reuse. D3H2 systematizes the identification of heterogeneous redundancies and optimizes the design of fault detection and reconfiguration mechanisms, by enabling the analysis of design alternatives with respect to dependability and cost. In this paper, we extend D3H2 for application to repairable systems. The method is extended with analysis capabilities allowing dependability assessment of complex reconfigurable systems. Analysed scenarios include time-dependencies between failure events and the corresponding reconfiguration actions. We demonstrate how D3H2 can support decisions about fault detection and reconfiguration that seek to improve dependability while reducing costs via application to a realistic railway case study

FADI: a fault-tolerant environment for open distributed computing

FADI is a complete programming environment that serves the reliable execution of distributed application programs. FADI encompasses all aspects of modern fault-tolerant distributed computing. The built-in user-transparent error detection mechanism covers processor node crashes and hardware transient failures. The mechanism also integrates user-assisted error checks into the system failure model. The nucleus non-blocking checkpointing mechanism combined with a novel selective message logging technique delivers an efficient, low-overhead backup and recovery mechanism for distributed processes. FADI also provides means for remote automatic process allocation on the distributed system nodes

Efficient redundancy in wired and wireless S2A architectures for NCS

This thesis focuses on the integration of wired and wireless nodes running on top of Gigabit Ethernet and WiFi respectively in Networked Control Systems. Such a networked control system investigated in this work consists of two wireless sensors, two wireless actuators, 14 wired sensors, two wired actuators and one wired supervisor. The architecture is based on Sensor-To-Actuator model. It is revealed through OMNeT++ simulations that the wired and wireless packet end-to-end delays in the developed model satisfy system requirements with no packet loss. Moreover, wired, wireless and mixed interferences are studied and quantified. The amount of interference that the model can withstand is determined. All results are subjected to a 95% confidence analysis. Additionally, the thesis focuses on reliability in the design of networked control systems that is becoming greatly important. Fault-tolerance is often used to increase system reliability. In this work, Triple Modular Redundancy (TMR) and Parallel Redundancy Protocol (PRP) are both applied to a Sensor-to-Actuator architecture with 16 sensors, four Actuators and one Supervisor. Two of the 16 sensors as well as two of the four actuators are wireless while the rest of the nodes are wired. It is first shown that this NCS succeeds in meeting all control system requirements (zero packet loss and bounded end-to-end delay). Reliability models are then developed to help designers choose the appropriate mix of fault-tolerant techniques in order to maximize lifetime while at the same time minimizing the extra cost due to the added redundancy

ISIS and META projects

The ISIS project has developed a new methodology, virtual synchony, for writing robust distributed software. High performance multicast, large scale applications, and wide area networks are the focus of interest. Several interesting applications that exploit the strengths of ISIS, including an NFS-compatible replicated file system, are being developed. The META project is distributed control in a soft real-time environment incorporating feedback. This domain encompasses examples as diverse as monitoring inventory and consumption on a factory floor, and performing load-balancing on a distributed computing system. One of the first uses of META is for distributed application management: the tasks of configuring a distributed program, dynamically adapting to failures, and monitoring its performance. Recent progress and current plans are reported

Intelligent redundant actuation system requirements and preliminary system design

Several redundant actuation system configurations were designed and demonstrated to satisfy the stringent operational requirements of advanced flight control systems. However, this has been accomplished largely through brute force hardware redundancy, resulting in significantly increased computational requirements on the flight control computers which perform the failure analysis and reconfiguration management. Modern technology now provides powerful, low-cost microprocessors which are effective in performing failure isolation and configuration management at the local actuator level. One such concept, called an Intelligent Redundant Actuation System (IRAS), significantly reduces the flight control computer requirements and performs the local tasks more comprehensively than previously feasible. The requirements and preliminary design of an experimental laboratory system capable of demonstrating the concept and sufficiently flexible to explore a variety of configurations are discussed