Dual-spin attitude control for outer planet missions

The applicability of dual-spin technology to a Jupiter orbiter with probe mission was investigated. Basic mission and system level attitude control requirements were established and preliminary mechanization and control concepts developed. A comprehensive 18-degree-of-freedom digital simulation was utilized extensively to establish control laws, study dynamic interactions, and determined key sensitivities. Fundamental system/subsystem constraints were identified, and the applicability of dual-spin technology to a Jupiter orbiter with probe mission was validated

Computer simulation of on-orbit manned maneuvering unit operations

Simulation of spacecraft on-orbit operations is discussed in reference to Martin Marietta's Space Operations Simulation laboratory's use of computer software models to drive a six-degree-of-freedom moving base carriage and two target gimbal systems. In particular, key simulation issues and related computer software models associated with providing real-time, man-in-the-loop simulations of the Manned Maneuvering Unit (MMU) are addressed with special attention given to how effectively these models and motion systems simulate the MMU's actual on-orbit operations. The weightless effects of the space environment require the development of entirely new devices for locomotion. Since the access to space is very limited, it is necessary to design, build, and test these new devices within the physical constraints of earth using simulators. The simulation method that is discussed here is the technique of using computer software models to drive a Moving Base Carriage (MBC) that is capable of providing simultaneous six-degree-of-freedom motions. This method, utilized at Martin Marietta's Space Operations Simulation (SOS) laboratory, provides the ability to simulate the operation of manned spacecraft, provides the pilot with proper three-dimensional visual cues, and allows training of on-orbit operations. The purpose here is to discuss significant MMU simulation issues, the related models that were developed in response to these issues and how effectively these models simulate the MMU's actual on-orbiter operations

An Event-Triggered Robust Attitude Control of Flexible Spacecraft With Modified Rodrigues Parameters Under Limited Communication

The attitude regulation of spacecraft using continuous time execution of the control law is not always affordable for the low-cost satellites with limited wireless resources. Of late, within the ambit of control of systems over networks, event-triggered control has proved to be instrumental in ensuring acceptable closed-loop performance while respecting bandwidth constraints of the underlying network. Aligned with these design objectives, a robust event-triggered attitude control algorithm is proposed to regulate the orientation of a flexible spacecraft subjected to parametric uncertainties, external disturbances, and vibrations due to flexible appendages. The control law is developed using a state-dependent single feedback vector, which further assists in obeying the constrained network. The current information of this vector is updated to the onboard controller only when the predefined triggering condition is satisfied. Thus, the control input is updated through communication channel only when there is a need, which ultimately helps in saving the communication resources. The system trajectories, under the proposed approach, are guaranteed to be uniformly ultimately bounded (UUB) in a small neighborhood of origin by using a high gain. Moreover, the practical applicability of the proposed scheme is also proved by showing the Zeno free behavior in the proposed control, i.e., it avoids the accumulation of the triggering sequence. The numerical simulations results are indeed encouraging and illustrate the effectiveness of the designed controller. Moreover, the numerical comparative analysis shows that the proposed approach performs better than periodically sampled data technique and sliding mode-based event-triggered technique.Qatar UniversityScopu

Spacecraft flight control system design selection process for a geostationary communication satellite

The Earth's first artificial satellite, Sputnik 1, slowly tumbled in orbit. The first U.S. satellite, Explorer 1, also tumbled out of control. Now, as we launch the Mars observer and the Cassini spacecraft, stability and control have become higher priorities. The flight control system design selection process is reviewed using as an example a geostationary communication satellite which is to have a life expectancy of 10 to 14 years. Disturbance torques including aerodynamic, magnetic, gravity gradient, solar, micrometeorite, debris, collision, and internal torques are assessed to quantify the disturbance environment so that the required compensating torque can be determined. Then control torque options, including passive versus active, momentum control, bias momentum, spin stabilization, dual spin, gravity gradient, magnetic, reaction wheels, control moment gyros, nutation dampers, inertia augmentation techniques, three-axis control, reactions control system (RCS), and RCS sizing, are considered. A flight control system design is then selected and preliminary stability criteria are met by the control gains selection

Control of large space structures

The control of large space structures was studied to determine what, if any, limitations are imposed on the size of spacecraft which may be controlled using current control system design technology. Using a typical structure in the 35 to 70 meter size category, a control system design that used actuators that are currently available was designed. The amount of control power required to maintain the vehicle in a stabilized gravity gradient pointing orientation that also damped various structural motions was determined. The moment of inertia and mass properties of this structure were varied to verify that stability and performance were maintained. The study concludes that the structure's size is required to change by at least a factor of two before any stability problems arise. The stability margin that is lost is due to the scaling of the gravity gradient torques (the rigid body control) and as such can easily be corrected by changing the control gains associated with the rigid body control. A secondary conclusion from the study is that the control design that accommodates the structural motions (to damp them) is a little more sensitive than the design that works on attitude control of the rigid body only

Fixed-time rendezvous control of spacecraft with a tumbling target under loss of actuator effectiveness

This paper investigates the fixed-time fault-tolerant control problem of spacecraft rendezvous and docking with a freely tumbling target in the presence of external disturbance and thruster faults. More specifically, based on the attitude of the target spacecraft, a line-of-sight coordinate frame is defined first, and the dynamical equations relative to the tumbling target are derived to describe the relative position (not six degrees of freedom). Then two fixed-time position controllers are proposed to guarantee that the closed-loop system is stable in finite time in the sense of a fixed-time concept, even in the presence of simultaneous external disturbance and thruster faults. Numerical simulations illustrate that the chaser spacecraft can successfully perform the rendezvous using the proposed controllers

Attitude Determination and Control Systems

The importance of accurately pointing spacecraft to our daily lives is pervasive, yet somehow escapes the notice of most people. In this section, we will summarize the processes and technologies used in designing and operating spacecraft pointing (i.e. attitude) systems

Apollo experience report: Guidance and control systems - Digital autopilot design development

The development of the Apollo digital autopilots (the primary attitude control systems that were used for all phases of the lunar landing mission) is summarized. This report includes design requirements, design constraints, and design philosophy. The development-process functions and the essential information flow paths are identified. Specific problem areas that existed during the development are included. A discussion is also presented on the benefits inherent in mechanizing attitude-controller logic and dynamic compensation in a digital computer