Dynamic complex opto-magnetic holography

Computer-generated holograms with their animated, three-dimensional appearance have long appealed to our imagination as the path towards truly immersive displays with bi-directional natural parallax. Impressive progress in updateable 3-D imagery has been achieved with liquid crystal modulators and high-resolution, but quasi-static holograms are being recorded in photosensitive materials. However, the memory requirements and computational loads of real-time, large-area holography will be hard to tackle for several decades to come with the current paradigm based on a matrix calculations and bit-plane writing. Here, we experimentally demonstrate a conceptually novel, holistic approach to serial computation and repeatable writing of computer-generated dynamic holograms without Fourier transform, using minimal amounts of computer memory. We use the ultrafast opto-magnetic recording of holographic patterns in a ferrimagnetic film with femtosecond laser pulses, driven by on-the-fly hardware computation of a single holographic point. The intensity-threshold nature of the magnetic medium allows sub-diffraction-limited, point-by-point toggling of arbitrarily localized magnetic spots on the sample, according to the proposed circular detour-phase encoding, providing complex modulation and symmetrical suppression of upper diffractive orders and conjugated terms in holographically reconstructed 3-D images

Models for reducing power consumption in CPLD and FPGA devices

Usage of programmable logic devices PLD has increased in the latest years because of the ability to quickly implement complex types of electronic systems while reducing cost and time of synthesis. This technology enables dynamic reconfiguration of different applications according to specific requirements. Also, power consumption and its loss is becoming an increasingly important requirement in the design of systems for portable applications fed by batteries. Other factors to be taken into account in the consumption of power are elements that are used for manufacturing, packaging, and cooling systems. Power consumption must be taken into consideration especially for wireless applications where battery technologies provide power 20 W/h and voltage 1.2 volts. Despite improvements in battery technology, the development of methods for reducing power consumption plays a decisive role in portable applications. Therefore, modeling of power consumption has become a requirement with the highest impact in the performance of FPGA elements. Despite generated models of the different manufacturers of these elements, this article will appear comparisons of models based on experimental measurements performed on both CPLD and FPGA elements. Based on these models is selected to simulate a system that will be implemented in two elements and see how reduced power consumption, without affecting system performance. Experimental results show that FPGA elements have better performance and significantly reduce the power consumption

A Bio-Inspired Vision Sensor With Dual Operation and Readout Modes

This paper presents a novel event-based vision sensor with two operation modes: intensity mode and spatial contrast detection. They can be combined with two different readout approaches: pulse density modulation and time-to-first spike. The sensor is conceived to be a node of an smart camera network made up of several independent an autonomous nodes that send information to a central one. The user can toggle the operation and the readout modes with two control bits. The sensor has low latency (below 1 ms under average illumination conditions), low power consumption (19 mA), and reduced data flow, when detecting spatial contrast. A new approach to compute the spatial contrast based on inter-pixel event communication less prone to mismatch effects than diffusive networks is proposed. The sensor was fabricated in the standard AMS4M2P 0.35-um process. A detailed system-level description and experimental results are provided.Office of Naval Research (USA) N00014-14-1-0355Ministerio de Economía y Competitividad TEC2012- 38921-C02-02, P12-TIC-2338, IPT-2011-1625-43000

Delay Measurements and Self Characterisation on FPGAs

This thesis examines new timing measurement methods for self delay characterisation of Field-Programmable Gate Arrays (FPGAs) components and delay measurement of complex circuits on FPGAs. Two novel measurement techniques based on analysis of a circuit's output failure rate and transition probability is proposed for accurate, precise and efficient measurement of propagation delays. The transition probability based method is especially attractive, since it requires no modifications in the circuit-under-test and requires little hardware resources, making it an ideal method for physical delay analysis of FPGA circuits. The relentless advancements in process technology has led to smaller and denser transistors in integrated circuits. While FPGA users benefit from this in terms of increased hardware resources for more complex designs, the actual productivity with FPGA in terms of timing performance (operating frequency, latency and throughput) has lagged behind the potential improvements from the improved technology due to delay variability in FPGA components and the inaccuracy of timing models used in FPGA timing analysis. The ability to measure delay of any arbitrary circuit on FPGA offers many opportunities for on-chip characterisation and physical timing analysis, allowing delay variability to be accurately tracked and variation-aware optimisations to be developed, reducing the productivity gap observed in today's FPGA designs. The measurement techniques are developed into complete self measurement and characterisation platforms in this thesis, demonstrating their practical uses in actual FPGA hardware for cross-chip delay characterisation and accurate delay measurement of both complex combinatorial and sequential circuits, further reinforcing their positions in solving the delay variability problem in FPGAs

A committee machine gas identification system based on dynamically reconfigurable FPGA

This paper proposes a gas identification system based on the committee machine (CM) classifier, which combines various gas identification algorithms, to obtain a unified decision with improved accuracy. The CM combines five different classifiers: K nearest neighbors (KNNs), multilayer perceptron (MLP), radial basis function (RBF), Gaussian mixture model (GMM), and probabilistic principal component analysis (PPCA). Experiments on real sensors' data proved the effectiveness of our system with an improved accuracy over individual classifiers. Due to the computationally intensive nature of CM, its implementation requires significant hardware resources. In order to overcome this problem, we propose a novel time multiplexing hardware implementation using a dynamically reconfigurable field programmable gate array (FPGA) platform. The processing is divided into three stages: sampling and preprocessing, pattern recognition, and decision stage. Dynamically reconfigurable FPGA technique is used to implement the system in a sequential manner, thus using limited hardware resources of the FPGA chip. The system is successfully tested for combustible gas identification application using our in-house tin-oxide gas sensors

A Project-based Approach to FPGA-aided Teaching of Digital Systems

This article shares experience and lessons learned in teaching course on programmable logic design at Universitas Muhammadiyah Surakarta, Indonesia This course is part of bachelor of engineering (electrical) degree program. Project- based approach is chosen to strengthen these students’ un- derstanding and practical skills. Each year’s project involves challenges for the students to solve by implementing digital system on an FPGA design board. Here, background and curriculum context of the course will be presented. The projects and their challenges will be discussed. Finally, lessons learned and future improvement on the student projects will be discussed. Index Terms—project-based learning, field programmable gate arrays, education, programmable logic design, hardware design languages, laboratories