New instruments and technologies for Cultural Heritage survey: full integration between point clouds and digital photogrammetry

In the last years the Geomatic Research Group of the Politecnico di Torino faced some new research topics about new instruments for point cloud generation (e.g. Time of Flight cameras) and strong integration between multi-image matching techniques and 3D Point Cloud information in order to solve the ambiguities of the already known matching algorithms. ToF cameras can be a good low cost alternative to LiDAR instruments for the generation of precise and accurate point clouds: up to now the application range is still limited but in a near future they will be able to satisfy the most part of the Cultural Heritage metric survey requirements. On the other hand multi-image matching techniques with a correct and deep integration of the point cloud information can give the correct solution for an "intelligent" survey of the geometric object break-lines, which are the correct starting point for a complete survey. These two research topics are strictly connected to a modern Cultural Heritage 3D survey approach. In this paper after a short analysis of the achieved results, an alternative possible scenario for the development of the metric survey approach inside the wider topic of Cultural Heritage Documentation is reporte

SEGMENTATION OF UAV-BASED IMAGES INCORPORATING 3D POINT CLOUD INFORMATION

Numerous applications related to urban scene analysis demand automatic recognition of buildings and distinct sub-elements. For example, if LiDAR data is available, only 3D information could be leveraged for the segmentation. However, this poses several risks, for instance, the in-plane objects cannot be distinguished from their surroundings. On the other hand, if only image based segmentation is performed, the geometric features (e.g., normal orientation, planarity) are not readily available. This renders the task of detecting the distinct sub-elements of the building with similar radiometric characteristic infeasible. In this paper the individual sub-elements of buildings are recognized through sub-segmentation of the building using geometric and radiometric characteristics jointly. 3D points generated from Unmanned Aerial Vehicle (UAV) images are used for inferring the geometric characteristics of roofs and facades of the building. However, the image-based 3D points are noisy, error prone and often contain gaps. Hence the segmentation in 3D space is not appropriate. Therefore, we propose to perform segmentation in image space using geometric features from the 3D point cloud along with the radiometric features. The initial detection of buildings in 3D point cloud is followed by the segmentation in image space using the region growing approach by utilizing various radiometric and 3D point cloud features. The developed method was tested using two data sets obtained with UAV images with a ground resolution of around 1-2 cm. The developed method accurately segmented most of the building elements when compared to the plane-based segmentation using 3D point cloud alone

Photogrammetric suite to manage the survey workflow in challenging environments and conditions

The present work is intended in providing new and innovative instruments to support the photogrammetric survey workflow during all its phases. A suite of tools has been conceived in order to manage the planning, the acquisition, the post-processing and the restitution steps, with particular attention to the rigorousness of the approach and to the final precision. The main focus of the research has been the implementation of the tool MAGO, standing for Adaptive Mesh for Orthophoto Generation. Its novelty consists in the possibility to automatically reconstruct \u201cunrolled\u201d orthophotos of adjacent fa\ue7ades of a building using the point cloud, instead of the mesh, as input source for the orthophoto reconstruction. The second tool has been conceived as a photogrammetric procedure based on Bundle Block Adjustment. The same issue is analysed from two mirrored perspectives: on the one hand, the use of moving cameras in a static scenario in order to manage real-time indoor navigation; on the other hand, the use of static cameras in a moving scenario in order to achieve the simultaneously reconstruction of the 3D model of the changing object. A third tool named U.Ph.O., standing for Unmanned Photogrammetric Office, has been integrated with a new module. The general aim is on the one hand to plan the photogrammetric survey considering the expected precision, computed on the basis of a network simulation, and on the other hand to check if the achieved survey has been collected compatibly with the planned conditions. The provided integration concerns the treatment of surfaces with a generic orientation further than the ones with a planimetric development. After a brief introduction, a general description about the photogrammetric principles is given in the first chapter of the dissertation; a chapter follows about the parallelism between Photogrammetry and Computer Vision and the contribution of this last in the development of the described tools. The third chapter specifically regards, indeed, the implemented software and tools, while the fourth contains the training test and the validation. Finally, conclusions and future perspectives are reported

EG-ICE 2021 Workshop on Intelligent Computing in Engineering

The 28th EG-ICE International Workshop 2021 brings together international experts working at the interface between advanced computing and modern engineering challenges. Many engineering tasks require open-world resolutions to support multi-actor collaboration, coping with approximate models, providing effective engineer-computer interaction, search in multi-dimensional solution spaces, accommodating uncertainty, including specialist domain knowledge, performing sensor-data interpretation and dealing with incomplete knowledge. While results from computer science provide much initial support for resolution, adaptation is unavoidable and most importantly, feedback from addressing engineering challenges drives fundamental computer-science research. Competence and knowledge transfer goes both ways

Human-Centric Computational Urban Design:Optimizing High-Density Urban Areas to Enhance Human Well-being

Urban areas face increasing pressure due to densification, presenting numerous challenges involving various stakeholders. The impact of densification on human well-being in existing urban areas can be both positive and negative, which requires a comprehensive understanding of its consequences. Computational Urban Design (CUD) emerges as a valuable tool in this context, offering rapid generation and evaluation of design solutions, although it currently lacks consideration for human perception in urban areas. This research addresses the challenge of incorporating human perception into computational urban design in the context of urban densification, and therefore demonstrates a complete process. Using Place Pulse 2.0 data and multinomial logit models, the study first quantifies the relationship between volumetric built elements and human perception (beauty, liveliness, and safety). The findings are then integrated into a Grasshopper-based CUD tool, enabling the optimization of parametric designs based on human perception criteria. The results show the potential of this approach. Finally, future research and development ideas are suggested based on the experiences and insights derived from this study

UAV multi-image matching approach for architectural survey in complex environments

Photogrammetric survey using UAV shows nowadays some aspects, especially related to the optimization of the operative workflows and best practices, that still need to be investigated. This work concerns the use of a small UAV for the documentation of an historical architectural complex, in which space constraints arises. The adoption of a rapid mapping workflow using frames extracted from videos is discussed, together with the exploitation of an automatic procedure for the acquisition of 360° shots, used for ensuring the minimum required overlap for a reliable and accurate image orientation