9,926 research outputs found
Cloud cover typing from environmental satellite imagery. Discriminating cloud structure with Fast Fourier Transforms (FFT)
The use of two dimensional Fast Fourier Transforms (FFTs) subjected to pattern recognition technology for the identification and classification of low altitude stratus cloud structure from Geostationary Operational Environmental Satellite (GOES) imagery was examined. The development of a scene independent pattern recognition methodology, unconstrained by conventional cloud morphological classifications was emphasized. A technique for extracting cloud shape, direction, and size attributes from GOES visual imagery was developed. These attributes were combined with two statistical attributes (cloud mean brightness, cloud standard deviation), and interrogated using unsupervised clustering amd maximum likelihood classification techniques. Results indicate that: (1) the key cloud discrimination attributes are mean brightness, direction, shape, and minimum size; (2) cloud structure can be differentiated at given pixel scales; (3) cloud type may be identifiable at coarser scales; (4) there are positive indications of scene independence which would permit development of a cloud signature bank; (5) edge enhancement of GOES imagery does not appreciably improve cloud classification over the use of raw data; and (6) the GOES imagery must be apodized before generation of FFTs
Towards a Practical Pedestrian Distraction Detection Framework using Wearables
Pedestrian safety continues to be a significant concern in urban communities
and pedestrian distraction is emerging as one of the main causes of grave and
fatal accidents involving pedestrians. The advent of sophisticated mobile and
wearable devices, equipped with high-precision on-board sensors capable of
measuring fine-grained user movements and context, provides a tremendous
opportunity for designing effective pedestrian safety systems and applications.
Accurate and efficient recognition of pedestrian distractions in real-time
given the memory, computation and communication limitations of these devices,
however, remains the key technical challenge in the design of such systems.
Earlier research efforts in pedestrian distraction detection using data
available from mobile and wearable devices have primarily focused only on
achieving high detection accuracy, resulting in designs that are either
resource intensive and unsuitable for implementation on mainstream mobile
devices, or computationally slow and not useful for real-time pedestrian safety
applications, or require specialized hardware and less likely to be adopted by
most users. In the quest for a pedestrian safety system that achieves a
favorable balance between computational efficiency, detection accuracy, and
energy consumption, this paper makes the following main contributions: (i)
design of a novel complex activity recognition framework which employs motion
data available from users' mobile and wearable devices and a lightweight
frequency matching approach to accurately and efficiently recognize complex
distraction related activities, and (ii) a comprehensive comparative evaluation
of the proposed framework with well-known complex activity recognition
techniques in the literature with the help of data collected from human subject
pedestrians and prototype implementations on commercially-available mobile and
wearable devices
Shaping, imaging and controlling plasmonic interference fields at buried interfaces
Filming and controlling plasmons at buried interfaces with nanometer (nm) and
femtosecond (fs) resolution has yet to be achieved and is critical for next
generation plasmonic/electronic devices. In this work, we use light to excite
and shape a plasmonic interference pattern at a buried metal-dielectric
interface in a nanostructured thin film. Plasmons are launched from a
photoexcited array of nanocavities and their propagation is filmed via
photon-induced near-field electron microscopy (PINEM). The resulting movie
directly captures the plasmon dynamics, allowing quantification of their group
velocity at approximately 0.3c, consistent with our theoretical predictions.
Furthermore, we show that the light polarization and nanocavity design can be
tailored to shape transient plasmonic gratings at the nanoscale. These results,
demonstrating dynamical imaging with PINEM, pave the way for the fs/nm
visualization and control of plasmonic fields in advanced heterostructures
based on novel 2D materials such as graphene, MoS, and ultrathin metal
films.Comment: 16 pages, 5 figures, 3 supplementary figure
SoundCompass: a distributed MEMS microphone array-based sensor for sound source localization
Sound source localization is a well-researched subject with applications ranging from localizing sniper fire in urban battlefields to cataloging wildlife in rural areas. One critical application is the localization of noise pollution sources in urban environments, due to an increasing body of evidence linking noise pollution to adverse effects on human health. Current noise mapping techniques often fail to accurately identify noise pollution sources, because they rely on the interpolation of a limited number of scattered sound sensors. Aiming to produce accurate noise pollution maps, we developed the SoundCompass, a low-cost sound sensor capable of measuring local noise levels and sound field directionality. Our first prototype is composed of a sensor array of 52 Microelectromechanical systems (MEMS) microphones, an inertial measuring unit and a low-power field-programmable gate array (FPGA). This article presents the SoundCompass's hardware and firmware design together with a data fusion technique that exploits the sensing capabilities of the SoundCompass in a wireless sensor network to localize noise pollution sources. Live tests produced a sound source localization accuracy of a few centimeters in a 25-m2 anechoic chamber, while simulation results accurately located up to five broadband sound sources in a 10,000-m2 open field
Split-screen single-camera stereoscopic PIV application to a turbulent confined swirling layer with free surface
An annular liquid wall jet, or vortex tube, generated by helical injection inside a tube is studied experimentally as a possible means of fusion reactor shielding. The hollow confined vortex/swirling layer exhibits simultaneously all the complexities of swirling turbulence, free surface, droplet formation, bubble entrapment; all posing challenging diagnostic issues. The construction of flow apparatus and the choice of working liquid and seeding particles facilitate unimpeded optical access to the flow field. A split-screen, single-camera stereoscopic particle image velocimetry (SPIV) scheme is employed for flow field characterization. Image calibration and free surface identification issues are discussed. The interference in measurements of laser beam reflection at the interface are identified and discussed. Selected velocity measurements and turbulence statistics are presented at Re_λ = 70 (Re = 3500 based on mean layer thickness)
- âŠ