533 research outputs found
Massive MIMO Performance - TDD Versus FDD: What Do Measurements Say?
Downlink beamforming in Massive MIMO either relies on uplink pilot
measurements - exploiting reciprocity and TDD operation, or on the use of a
predetermined grid of beams with user equipments reporting their preferred
beams, mostly in FDD operation. Massive MIMO in its originally conceived form
uses the first strategy, with uplink pilots, whereas there is currently
significant commercial interest in the second, grid-of-beams. It has been
analytically shown that in isotropic scattering (independent Rayleigh fading)
the first approach outperforms the second. Nevertheless there remains
controversy regarding their relative performance in practice. In this
contribution, the performances of these two strategies are compared using
measured channel data at 2.6 GHz.Comment: Submitted to IEEE Transactions on Wireless Communications,
31/Mar/201
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
A Generalized Framework on Beamformer Design and CSI Acquisition for Single-Carrier Massive MIMO Systems in Millimeter Wave Channels
In this paper, we establish a general framework on the reduced dimensional
channel state information (CSI) estimation and pre-beamformer design for
frequency-selective massive multiple-input multiple-output MIMO systems
employing single-carrier (SC) modulation in time division duplex (TDD) mode by
exploiting the joint angle-delay domain channel sparsity in millimeter (mm)
wave frequencies. First, based on a generic subspace projection taking the
joint angle-delay power profile and user-grouping into account, the reduced
rank minimum mean square error (RR-MMSE) instantaneous CSI estimator is derived
for spatially correlated wideband MIMO channels. Second, the statistical
pre-beamformer design is considered for frequency-selective SC massive MIMO
channels. We examine the dimension reduction problem and subspace (beamspace)
construction on which the RR-MMSE estimation can be realized as accurately as
possible. Finally, a spatio-temporal domain correlator type reduced rank
channel estimator, as an approximation of the RR-MMSE estimate, is obtained by
carrying out least square (LS) estimation in a proper reduced dimensional
beamspace. It is observed that the proposed techniques show remarkable
robustness to the pilot interference (or contamination) with a significant
reduction in pilot overhead
MmWave Massive MIMO Based Wireless Backhaul for 5G Ultra-Dense Network
Ultra-dense network (UDN) has been considered as a promising candidate for
future 5G network to meet the explosive data demand. To realize UDN, a
reliable, Gigahertz bandwidth, and cost-effective backhaul connecting
ultra-dense small-cell base stations (BSs) and macro-cell BS is prerequisite.
Millimeter-wave (mmWave) can provide the potential Gbps traffic for wireless
backhaul. Moreover, mmWave can be easily integrated with massive MIMO for the
improved link reliability. In this article, we discuss the feasibility of
mmWave massive MIMO based wireless backhaul for 5G UDN, and the benefits and
challenges are also addressed. Especially, we propose a digitally-controlled
phase-shifter network (DPSN) based hybrid precoding/combining scheme for mmWave
massive MIMO, whereby the low-rank property of mmWave massive MIMO channel
matrix is leveraged to reduce the required cost and complexity of transceiver
with a negligible performance loss. One key feature of the proposed scheme is
that the macro-cell BS can simultaneously support multiple small-cell BSs with
multiple streams for each smallcell BS, which is essentially different from
conventional hybrid precoding/combining schemes typically limited to
single-user MIMO with multiple streams or multi-user MIMO with single stream
for each user. Based on the proposed scheme, we further explore the fundamental
issues of developing mmWave massive MIMO for wireless backhaul, and the
associated challenges, insight, and prospect to enable the mmWave massive MIMO
based wireless backhaul for 5G UDN are discussed.Comment: This paper has been accepted by IEEE Wireless Communications
Magazine. This paper is related to 5G, ultra-dense network (UDN), millimeter
waves (mmWave) fronthaul/backhaul, massive MIMO, sparsity/low-rank property
of mmWave massive MIMO channels, sparse channel estimation, compressive
sensing (CS), hybrid digital/analog precoding/combining, and hybrid
beamforming. http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=730653
- …