1,750 research outputs found
Extending OFDM Symbols to Reduce Power Consumption
Existing communication standards have limited capabilities to adapt to low SNR environments or to exploit low data rate requirements in a power efficient way. Existing techniques like e.g. control coding do not reduce the computational load when reducing data rates. In this paper, we introduce differential Extended Symbol OFDM (differential ES-OFDM) which is based on the transmission of symbols that are extended in time. This way it can operate at low SNR. Using differential BPSK modulation, approximately 2.1 dB SNR improvement per doubling of the symbol length (halving the bitrate) is obtained. The sensitivity to frequency offsets of differential ES-OFDM is basically independent of symbol extension. Extending symbols reduces the computational load on the radio modem within the transmitter which is essential to reduce overall power consumption. The differential ES-OFDM receiver architecture also offers opportunities to reduce power consumption
Waveform Design for 5G and Beyond
5G is envisioned to improve major key performance indicators (KPIs), such as
peak data rate, spectral efficiency, power consumption, complexity, connection
density, latency, and mobility. This chapter aims to provide a complete picture
of the ongoing 5G waveform discussions and overviews the major candidates. It
provides a brief description of the waveform and reveals the 5G use cases and
waveform design requirements. The chapter presents the main features of cyclic
prefix-orthogonal frequency-division multiplexing (CP-OFDM) that is deployed in
4G LTE systems. CP-OFDM is the baseline of the 5G waveform discussions since
the performance of a new waveform is usually compared with it. The chapter
examines the essential characteristics of the major waveform candidates along
with the related advantages and disadvantages. It summarizes and compares the
key features of different waveforms.Comment: 22 pages, 21 figures, 2 tables; accepted version (The URL for the
final version:
https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119333142.ch2
Mobile Communications Beyond 52.6 GHz: Waveforms, Numerology, and Phase Noise Challenge
In this article, the first considerations for the 5G New Radio (NR) physical
layer evolution to support beyond 52.6GHz communications are provided. In
addition, the performance of both OFDM based and DFT-s-OFDM based networks are
evaluated with special emphasis on the phase noise (PN) induced distortion. It
is shown that DFT-s-OFDM is more robust against PN under 5G NR Release 15
assumptions, namely regarding the supported phase tracking reference signal
(PTRS) designs, since it enables more effective PN mitigation directly in the
time domain. To further improve the PN compensation capabilities, the PTRS
design for DFT-s-OFDM is revised, while for the OFDM waveform a novel block
PTRS structure is introduced, providing similar link performance as DFT-s-OFDM
with enhanced PTRS design. We demonstrate that the existing 5G NR Release 15
solutions can be extended to support efficient mobile communications at 60GHz
carrier frequency with the enhanced PTRS structures. In addition, DFT-s-OFDM
based downlink for user data could be considered for beyond 52.6GHz
communications to further improve system power efficiency and performance with
higher order modulation and coding schemes. Finally, network link budget and
cell size considerations are provided, showing that at certain bands with
specific transmit power regulation, the cell size can eventually be downlink
limited.Comment: This manuscript has been submitted to IEEE Wireless Communications
Magazine (WCM). 8 pages, 4 figures, and 2 table
Throughput and range characterization of IEEE 802.11ah
The most essential part of Internet of Things (IoT) infrastructure is the
wireless communication system that acts as a bridge for the delivery of data
and control messages. However, the existing wireless technologies lack the
ability to support a huge amount of data exchange from many battery driven
devices spread over a wide area. In order to support the IoT paradigm, the IEEE
802.11 standard committee is in process of introducing a new standard, called
IEEE 802.11ah. This is one of the most promising and appealing standards, which
aims to bridge the gap between traditional mobile networks and the demands of
the IoT. In this paper, we first discuss the main PHY and MAC layer amendments
proposed for IEEE 802.11ah. Furthermore, we investigate the operability of IEEE
802.11ah as a backhaul link to connect devices over a long range. Additionally,
we compare the aforementioned standard with previous notable IEEE 802.11
amendments (i.e. IEEE 802.11n and IEEE 802.11ac) in terms of throughput (with
and without frame aggregation) by utilizing the most robust modulation schemes.
The results show an improved performance of IEEE 802.11ah (in terms of power
received at long range while experiencing different packet error rates) as
compared to previous IEEE 802.11 standards.Comment: 7 pages, 6 figures, 5 table
- …