3,660 research outputs found
Numerical solution of the Navier-Stokes equations for arbitrary two-dimensional multi-element airfoils
The development of a numerical simulation of time dependent, turbulent, compressible flow about two dimensional multi-element airfoils of arbitrary shape is described. The basis of this simulation is a technique of automatic numerical generation of coordinate systems fitted to the multiple bodies regardless of their number or shape. Procedures developed whereby the coordinate lines are automatically concentrated in the boundary layer at any Reynolds number are discussed. The compressible turbulent solution involves an algebraic eddy viscosity turbulence model. The laminar version was run for transonic flow at free stream Mach numbers up to 0.9
Numerical solution of the Navier-Stokes equations about three-dimensional configurations: A survey
The numerical solution of the Navier-Stokes equations about three-dimensional configurations is reviewed. Formulational and computational requirements for the various Navier-Stokes approaches are examined for typical problems including the viscous flow field solution about a complete aerospace vehicle. Recent computed results, with experimental comparisons when available, are presented to highlight the presentation. The future of Navier-Stokes applications in three-dimensions is seen to be rapidly expanding across a broad front including internal and external flows, and flows across the entire speed regime from incompressible to hypersonic applications. Prospects for the future are described and recommendations for areas of concentrated research are indicated
Spectral/hp element methods: recent developments, applications, and perspectives
The spectral/hp element method combines the geometric flexibility of the
classical h-type finite element technique with the desirable numerical
properties of spectral methods, employing high-degree piecewise polynomial
basis functions on coarse finite element-type meshes. The spatial approximation
is based upon orthogonal polynomials, such as Legendre or Chebychev
polynomials, modified to accommodate C0-continuous expansions. Computationally
and theoretically, by increasing the polynomial order p, high-precision
solutions and fast convergence can be obtained and, in particular, under
certain regularity assumptions an exponential reduction in approximation error
between numerical and exact solutions can be achieved. This method has now been
applied in many simulation studies of both fundamental and practical
engineering flows. This paper briefly describes the formulation of the
spectral/hp element method and provides an overview of its application to
computational fluid dynamics. In particular, it focuses on the use the
spectral/hp element method in transitional flows and ocean engineering.
Finally, some of the major challenges to be overcome in order to use the
spectral/hp element method in more complex science and engineering applications
are discussed
Spectral methods in fluid dynamics
Fundamental aspects of spectral methods are introduced. Recent developments in spectral methods are reviewed with an emphasis on collocation techniques. Their applications to both compressible and incompressible flows, to viscous as well as inviscid flows, and also to chemically reacting flows are surveyed. The key role that these methods play in the simulation of stability, transition, and turbulence is brought out. A perspective is provided on some of the obstacles that prohibit a wider use of these methods, and how these obstacles are being overcome
On the calculation of supersonic, separating, and reattaching flows
A method is developed for solving the laminar and turbulent compressible boundary-layer equations for separating and reattaching flows. Results of this method are compared with experimental data for two laminar and three turbulent boundary-layer, shock-wave interactions. Several Navier-Stokes solutions were obtained for each of the laminar boundary-layer, shock-wave interactions considered. Comparison of these solutions indicates a first-order sensitivity in C sub f to the computational mesh selected in both the viscous and inviscid portions of the flow
On computations of the integrated space shuttle flowfield using overset grids
Numerical simulations using the thin-layer Navier-Stokes equations and chimera (overset) grid approach were carried out for flows around the integrated space shuttle vehicle over a range of Mach numbers. Body-conforming grids were used for all the component grids. Testcases include a three-component overset grid - the external tank (ET), the solid rocket booster (SRB) and the orbiter (ORB), and a five-component overset grid - the ET, SRB, ORB, forward and aft attach hardware, configurations. The results were compared with the wind tunnel and flight data. In addition, a Poisson solution procedure (a special case of the vorticity-velocity formulation) using primitive variables was developed to solve three-dimensional, irrotational, inviscid flows for single as well as overset grids. The solutions were validated by comparisons with other analytical or numerical solution, and/or experimental results for various geometries. The Poisson solution was also used as an initial guess for the thin-layer Navier-Stokes solution procedure to improve the efficiency of the numerical flow simulations. It was found that this approach resulted in roughly a 30 percent CPU time savings as compared with the procedure solving the thin-layer Navier-Stokes equations from a uniform free stream flowfield
Implicit large-eddy simulation of compressible flows using the Interior Embedded Discontinuous Galerkin method
We present a high-order implicit large-eddy simulation (ILES) approach for
simulating transitional turbulent flows. The approach consists of an Interior
Embedded Discontinuous Galerkin (IEDG) method for the discretization of the
compressible Navier-Stokes equations and a parallel preconditioned Newton-GMRES
solver for the resulting nonlinear system of equations. The IEDG method arises
from the marriage of the Embedded Discontinuous Galerkin (EDG) method and the
Hybridizable Discontinuous Galerkin (HDG) method. As such, the IEDG method
inherits the advantages of both the EDG method and the HDG method to make
itself well-suited for turbulence simulations. We propose a minimal residual
Newton algorithm for solving the nonlinear system arising from the IEDG
discretization of the Navier-Stokes equations. The preconditioned GMRES
algorithm is based on a restricted additive Schwarz (RAS) preconditioner in
conjunction with a block incomplete LU factorization at the subdomain level.
The proposed approach is applied to the ILES of transitional turbulent flows
over a NACA 65-(18)10 compressor cascade at Reynolds number 250,000 in both
design and off-design conditions. The high-order ILES results show good
agreement with a subgrid-scale LES model discretized with a second-order finite
volume code while using significantly less degrees of freedom. This work shows
that high-order accuracy is key for predicting transitional turbulent flows
without a SGS model.Comment: 54th AIAA Aerospace Sciences Meeting, AIAA SciTech, 201
Volume 2: Explicit, multistage upwind schemes for Euler and Navier-Stokes equations
The objective of this study was to develop a high-resolution-explicit-multi-block numerical algorithm, suitable for efficient computation of the three-dimensional, time-dependent Euler and Navier-Stokes equations. The resulting algorithm has employed a finite volume approach, using monotonic upstream schemes for conservation laws (MUSCL)-type differencing to obtain state variables at cell interface. Variable interpolations were written in the k-scheme formulation. Inviscid fluxes were calculated via Roe's flux-difference splitting, and van Leer's flux-vector splitting techniques, which are considered state of the art. The viscous terms were discretized using a second-order, central-difference operator. Two classes of explicit time integration has been investigated for solving the compressible inviscid/viscous flow problems--two-state predictor-corrector schemes, and multistage time-stepping schemes. The coefficients of the multistage time-stepping schemes have been modified successfully to achieve better performance with upwind differencing. A technique was developed to optimize the coefficients for good high-frequency damping at relatively high CFL numbers. Local time-stepping, implicit residual smoothing, and multigrid procedure were added to the explicit time stepping scheme to accelerate convergence to steady-state. The developed algorithm was implemented successfully in a multi-block code, which provides complete topological and geometric flexibility. The only requirement is C degree continuity of the grid across the block interface. The algorithm has been validated on a diverse set of three-dimensional test cases of increasing complexity. The cases studied were: (1) supersonic corner flow; (2) supersonic plume flow; (3) laminar and turbulent flow over a flat plate; (4) transonic flow over an ONERA M6 wing; and (5) unsteady flow of a compressible jet impinging on a ground plane (with and without cross flow). The emphasis of the test cases was validation of code, and assessment of performance, as well as demonstration of flexibility
Numerical simulation of steady supersonic flow
A noniterative, implicit, space-marching, finite-difference algorithm was developed for the steady thin-layer Navier-Stokes equations in conservation-law form. The numerical algorithm is applicable to steady supersonic viscous flow over bodies of arbitrary shape. In addition, the same code can be used to compute supersonic inviscid flow or three-dimensional boundary layers. Computed results from two-dimensional and three-dimensional versions of the numerical algorithm are in good agreement with those obtained from more costly time-marching techniques
- …