Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Exploring Processor and Memory Architectures for Multimedia

Multimedia has become one of the cornerstones of our 21st century society and, when combined with mobility, has enabled a tremendous evolution of our society. However, joining these two concepts introduces many technical challenges. These range from having sufficient performance for handling multimedia content to having the battery stamina for acceptable mobile usage. When taking a projection of where we are heading, we see these issues becoming ever more challenging by increased mobility as well as advancements in multimedia content, such as introduction of stereoscopic 3D and augmented reality. The increased performance needs for handling multimedia come not only from an ongoing step-up in resolution going from QVGA (320x240) to Full HD (1920x1080) a 27x increase in less than half a decade. On top of this, there is also codec evolution (MPEG-2 to H.264 AVC) that adds to the computational load increase. To meet these performance challenges there has been processing and memory architecture advances (SIMD, out-of-order superscalarity, multicore processing and heterogeneous multilevel memories) in the mobile domain, in conjunction with ever increasing operating frequencies (200MHz to 2GHz) and on-chip memory sizes (128KB to 2-3MB). At the same time there is an increase in requirements for mobility, placing higher demands on battery-powered systems despite the steady increase in battery capacity (500 to 2000mAh). This leaves negative net result in-terms of battery capacity versus performance advances. In order to make optimal use of these architectural advances and to meet the power limitations in mobile systems, there is a need for taking an overall approach on how to best utilize these systems. The right trade-off between performance and power is crucial. On top of these constraints, the flexibility aspects of the system need to be addressed. All this makes it very important to reach the right architectural balance in the system. The first goal for this thesis is to examine multimedia applications and propose a flexible solution that can meet the architectural requirements in a mobile system. Secondly, propose an automated methodology of optimally mapping multimedia data and instructions to a heterogeneous multilevel memory subsystem. The proposed methodology uses constraint programming for solving a multidimensional optimization problem. Results from this work indicate that using today’s most advanced mobile processor technology together with a multi-level heterogeneous on-chip memory subsystem can meet the performance requirements for handling multimedia. By utilizing the automated optimal memory mapping method presented in this thesis lower total power consumption can be achieved, whilst performance for multimedia applications is improved, by employing enhanced memory management. This is achieved through reduced external accesses and better reuse of memory objects. This automatic method shows high accuracy, up to 90%, for predicting multimedia memory accesses for a given architecture

A Survey on Compiler Autotuning using Machine Learning

Since the mid-1990s, researchers have been trying to use machine-learning based approaches to solve a number of different compiler optimization problems. These techniques primarily enhance the quality of the obtained results and, more importantly, make it feasible to tackle two main compiler optimization problems: optimization selection (choosing which optimizations to apply) and phase-ordering (choosing the order of applying optimizations). The compiler optimization space continues to grow due to the advancement of applications, increasing number of compiler optimizations, and new target architectures. Generic optimization passes in compilers cannot fully leverage newly introduced optimizations and, therefore, cannot keep up with the pace of increasing options. This survey summarizes and classifies the recent advances in using machine learning for the compiler optimization field, particularly on the two major problems of (1) selecting the best optimizations and (2) the phase-ordering of optimizations. The survey highlights the approaches taken so far, the obtained results, the fine-grain classification among different approaches and finally, the influential papers of the field.Comment: version 5.0 (updated on September 2018)- Preprint Version For our Accepted Journal @ ACM CSUR 2018 (42 pages) - This survey will be updated quarterly here (Send me your new published papers to be added in the subsequent version) History: Received November 2016; Revised August 2017; Revised February 2018; Accepted March 2018

Doctor of Philosophy

dissertationThe embedded system space is characterized by a rapid evolution in the complexity and functionality of applications. In addition, the short time-to-market nature of the business motivates the use of programmable devices capable of meeting the conflicting constraints of low-energy, high-performance, and short design times. The keys to achieving these conflicting constraints are specialization and maximally extracting available application parallelism. General purpose processors are flexible but are either too power hungry or lack the necessary performance. Application-specific integrated circuits (ASICS) efficiently meet the performance and power needs but are inflexible. Programmable domain-specific architectures (DSAs) are an attractive middle ground, but their design requires significant time, resources, and expertise in a variety of specialties, which range from application algorithms to architecture and ultimately, circuit design. This dissertation presents CoGenE, a design framework that automates the design of energy-performance-optimal DSAs for embedded systems. For a given application domain and a user-chosen initial architectural specification, CoGenE consists of a a Compiler to generate execution binary, a simulator Generator to collect performance/energy statistics, and an Explorer that modifies the current architecture to improve energy-performance-area characteristics. The above process repeats automatically until the user-specified constraints are achieved. This removes or alleviates the time needed to understand the application, manually design the DSA, and generate object code for the DSA. Thus, CoGenE is a new design methodology that represents a significant improvement in performance, energy dissipation, design time, and resources. This dissertation employs the face recognition domain to showcase a flexible architectural design methodology that creates "ASIC-like" DSAs. The DSAs are instruction set architecture (ISA)-independent and achieve good energy-performance characteristics by coscheduling the often conflicting constraints of data access, data movement, and computation through a flexible interconnect. This represents a significant increase in programming complexity and code generation time. To address this problem, the CoGenE compiler employs integer linear programming (ILP)-based 'interconnect-aware' scheduling techniques for automatic code generation. The CoGenE explorer employs an iterative technique to search the complete design space and select a set of energy-performance-optimal candidates. When compared to manual designs, results demonstrate that CoGenE produces superior designs for three application domains: face recognition, speech recognition and wireless telephony. While CoGenE is well suited to applications that exhibit a streaming behavior, multithreaded applications like ray tracing present a different but important challenge. To demonstrate its generality, CoGenE is evaluated in designing a novel multicore N-wide SIMD architecture, known as StreamRay, for the ray tracing domain. CoGenE is used to synthesize the SIMD execution cores, the compiler that generates the application binary, and the interconnection subsystem. Further, separating address and data computations in space reduces data movement and contention for resources, thereby significantly improving performance compared to existing ray tracing approaches

Optimizing energy-efficiency for multi-core packet processing systems in a compiler framework

Network applications become increasingly computation-intensive and the amount of traffic soars unprecedentedly nowadays. Multi-core and multi-threaded techniques are thus widely employed in packet processing system to meet the changing requirement. However, the processing power cannot be fully utilized without a suitable programming environment. The compilation procedure is decisive for the quality of the code. It can largely determine the overall system performance in terms of packet throughput, individual packet latency, core utilization and energy efficiency. The thesis investigated compilation issues in networking domain first, particularly on energy consumption. And as a cornerstone for any compiler optimizations, a code analysis module for collecting program dependency is presented and incorporated into a compiler framework. With that dependency information, a strategy based on graph bi-partitioning and mapping is proposed to search for an optimal configuration in a parallel-pipeline fashion. The energy-aware extension is specifically effective in enhancing the energy-efficiency of the whole system. Finally, a generic evaluation framework for simulating the performance and energy consumption of a packet processing system is given. It accepts flexible architectural configuration and is capable of performingarbitrary code mapping. The simulation time is extremely short compared to full-fledged simulators. A set of our optimization results is gathered using the framework

Energy analysis and optimisation techniques for automatically synthesised coprocessors

The primary outcome of this research project is the development of a methodology enabling fast automated early-stage power and energy analysis of configurable processors for system-on-chip platforms. Such capability is essential to the process of selecting energy efficient processors during design-space exploration, when potential savings are highest. This has been achieved by developing dynamic and static energy consumption models for the constituent blocks within the processors. Several optimisations have been identified, specifically targeting the most significant blocks in terms of energy consumption. Instruction encoding mechanism reduces both the energy and area requirements of the instruction cache; modifications to the multiplier unit reduce energy consumption during inactive cycles. Both techniques are demonstrated to offer substantial energy savings. The aforementioned techniques have undergone detailed evaluation and, based on the positive outcomes obtained, have been incorporated into Cascade, a system-on-chip coprocessor synthesis tool developed by Critical Blue, to provide automated analysis and optimisation of processor energy requirements. This thesis details the process of identifying and examining each method, along with the results obtained. Finally, a case study demonstrates the benefits of the developed functionality, from the perspective of someone using Cascade to automate the creation of an energy-efficient configurable processor for system-on-chip platforms