69 research outputs found
An Experimental Study of Reduced-Voltage Operation in Modern FPGAs for Neural Network Acceleration
We empirically evaluate an undervolting technique, i.e., underscaling the
circuit supply voltage below the nominal level, to improve the power-efficiency
of Convolutional Neural Network (CNN) accelerators mapped to Field Programmable
Gate Arrays (FPGAs). Undervolting below a safe voltage level can lead to timing
faults due to excessive circuit latency increase. We evaluate the
reliability-power trade-off for such accelerators. Specifically, we
experimentally study the reduced-voltage operation of multiple components of
real FPGAs, characterize the corresponding reliability behavior of CNN
accelerators, propose techniques to minimize the drawbacks of reduced-voltage
operation, and combine undervolting with architectural CNN optimization
techniques, i.e., quantization and pruning. We investigate the effect of
environmental temperature on the reliability-power trade-off of such
accelerators. We perform experiments on three identical samples of modern
Xilinx ZCU102 FPGA platforms with five state-of-the-art image classification
CNN benchmarks. This approach allows us to study the effects of our
undervolting technique for both software and hardware variability. We achieve
more than 3X power-efficiency (GOPs/W) gain via undervolting. 2.6X of this gain
is the result of eliminating the voltage guardband region, i.e., the safe
voltage region below the nominal level that is set by FPGA vendor to ensure
correct functionality in worst-case environmental and circuit conditions. 43%
of the power-efficiency gain is due to further undervolting below the
guardband, which comes at the cost of accuracy loss in the CNN accelerator. We
evaluate an effective frequency underscaling technique that prevents this
accuracy loss, and find that it reduces the power-efficiency gain from 43% to
25%.Comment: To appear at the DSN 2020 conferenc
A Construction Kit for Efficient Low Power Neural Network Accelerator Designs
Implementing embedded neural network processing at the edge requires
efficient hardware acceleration that couples high computational performance
with low power consumption. Driven by the rapid evolution of network
architectures and their algorithmic features, accelerator designs are
constantly updated and improved. To evaluate and compare hardware design
choices, designers can refer to a myriad of accelerator implementations in the
literature. Surveys provide an overview of these works but are often limited to
system-level and benchmark-specific performance metrics, making it difficult to
quantitatively compare the individual effect of each utilized optimization
technique. This complicates the evaluation of optimizations for new accelerator
designs, slowing-down the research progress. This work provides a survey of
neural network accelerator optimization approaches that have been used in
recent works and reports their individual effects on edge processing
performance. It presents the list of optimizations and their quantitative
effects as a construction kit, allowing to assess the design choices for each
building block separately. Reported optimizations range from up to 10'000x
memory savings to 33x energy reductions, providing chip designers an overview
of design choices for implementing efficient low power neural network
accelerators
An experimental study of reduced-voltage operation in modern FPGAs for neural network acceleration
We empirically evaluate an undervolting technique, i.e., underscaling the circuit supply voltage below the nominal level, to improve the power-efficiency of Convolutional Neural Network (CNN) accelerators mapped to Field Programmable Gate Arrays (FPGAs). Undervolting below a safe voltage level can lead to timing faults due to excessive circuit latency increase. We evaluate the reliability-power trade-off for such accelerators. Specifically, we experimentally study the reduced-voltage operation of multiple components of real FPGAs, characterize the corresponding reliability behavior of CNN accelerators, propose techniques to minimize the drawbacks of reduced-voltage operation, and combine undervolting with architectural CNN optimization techniques, i.e., quantization and pruning. We investigate the effect ofenvironmental temperature on the reliability-power trade-off of such accelerators. We perform experiments on three identical samples of modern Xilinx ZCU102 FPGA platforms with five state-of-the-art image classification CNN benchmarks. This approach allows us to study the effects of our undervolting technique for both software and hardware variability. We achieve more than 3X power-efficiency (GOPs/W ) gain via undervolting. 2.6X of this gain is the result of eliminating the voltage guardband region, i.e., the safe voltage region below the nominal level that is set by FPGA vendor to ensure correct functionality in worst-case environmental and circuit conditions. 43% of the power-efficiency gain is due to further undervolting below the guardband, which comes at the cost of accuracy loss in the CNN accelerator. We evaluate an effective frequency underscaling technique that prevents this accuracy loss, and find that it reduces the power-efficiency gain from 43% to 25%.The work done for this paper was partially supported by a HiPEAC Collaboration Grant funded by the H2020 HiPEAC Project under grant agreement No. 779656. The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the LEGaTO Project (www.legato-project.eu), grant agreement No. 780681.Peer ReviewedPostprint (author's final draft
Hardware Implementation of Deep Network Accelerators Towards Healthcare and Biomedical Applications
With the advent of dedicated Deep Learning (DL) accelerators and neuromorphic
processors, new opportunities are emerging for applying deep and Spiking Neural
Network (SNN) algorithms to healthcare and biomedical applications at the edge.
This can facilitate the advancement of the medical Internet of Things (IoT)
systems and Point of Care (PoC) devices. In this paper, we provide a tutorial
describing how various technologies ranging from emerging memristive devices,
to established Field Programmable Gate Arrays (FPGAs), and mature Complementary
Metal Oxide Semiconductor (CMOS) technology can be used to develop efficient DL
accelerators to solve a wide variety of diagnostic, pattern recognition, and
signal processing problems in healthcare. Furthermore, we explore how spiking
neuromorphic processors can complement their DL counterparts for processing
biomedical signals. After providing the required background, we unify the
sparsely distributed research on neural network and neuromorphic hardware
implementations as applied to the healthcare domain. In addition, we benchmark
various hardware platforms by performing a biomedical electromyography (EMG)
signal processing task and drawing comparisons among them in terms of inference
delay and energy. Finally, we provide our analysis of the field and share a
perspective on the advantages, disadvantages, challenges, and opportunities
that different accelerators and neuromorphic processors introduce to healthcare
and biomedical domains. This paper can serve a large audience, ranging from
nanoelectronics researchers, to biomedical and healthcare practitioners in
grasping the fundamental interplay between hardware, algorithms, and clinical
adoption of these tools, as we shed light on the future of deep networks and
spiking neuromorphic processing systems as proponents for driving biomedical
circuits and systems forward.Comment: Submitted to IEEE Transactions on Biomedical Circuits and Systems (21
pages, 10 figures, 5 tables
Always-On 674uW @ 4GOP/s Error Resilient Binary Neural Networks with Aggressive SRAM Voltage Scaling on a 22nm IoT End-Node
Binary Neural Networks (BNNs) have been shown to be robust to random
bit-level noise, making aggressive voltage scaling attractive as a power-saving
technique for both logic and SRAMs. In this work, we introduce the first fully
programmable IoT end-node system-on-chip (SoC) capable of executing
software-defined, hardware-accelerated BNNs at ultra-low voltage. Our SoC
exploits a hybrid memory scheme where error-vulnerable SRAMs are complemented
by reliable standard-cell memories to safely store critical data under
aggressive voltage scaling. On a prototype in 22nm FDX technology, we
demonstrate that both the logic and SRAM voltage can be dropped to 0.5Vwithout
any accuracy penalty on a BNN trained for the CIFAR-10 dataset, improving
energy efficiency by 2.2X w.r.t. nominal conditions. Furthermore, we show that
the supply voltage can be dropped to 0.42V (50% of nominal) while keeping more
than99% of the nominal accuracy (with a bit error rate ~1/1000). In this
operating point, our prototype performs 4Gop/s (15.4Inference/s on the CIFAR-10
dataset) by computing up to 13binary ops per pJ, achieving 22.8 Inference/s/mW
while keeping within a peak power envelope of 674uW - low enough to enable
always-on operation in ultra-low power smart cameras, long-lifetime
environmental sensors, and insect-sized pico-drones.Comment: Submitted to ISICAS2020 journal special issu
- …