Bidirectional Electric Vehicles Service Integration in Smart Power Grid with Renewable Energy Resources

As electric vehicles (EVs) become more popular, the utility companies are forced to increase power generations in the grid. However, these EVs are capable of providing power to the grid to deliver different grid ancillary services in a concept known as vehicle-to-grid (V2G) and grid-to-vehicle (G2V), in which the EV can serve as a load or source at the same time. These services can provide more benefits when they are integrated with Photovoltaic (PV) generation. The proper modeling, design and control for the power conversion systems that provide the optimum integration among the EVs, PV generations and grid are investigated in this thesis. The coupling between the PV generation and integration bus is accomplished through a unidirectional converter. Precise dynamic and small-signal models for the grid-connected PV power system are developed and utilized to predict the system’s performance during the different operating conditions. An advanced intelligent maximum power point tracker based on fuzzy logic control is developed and designed using a mix between the analytical model and genetic algorithm optimization. The EV is connected to the integration bus through a bidirectional inductive wireless power transfer system (BIWPTS), which allows the EV to be charged and discharged wirelessly during the long-term parking, transient stops and movement. Accurate analytical and physics-based models for the BIWPTS are developed and utilized to forecast its performance, and novel practical limitations for the active and reactive power-flow during G2V and V2G operations are stated. A comparative and assessment analysis for the different compensation topologies in the symmetrical BIWPTS was performed based on analytical, simulation and experimental data. Also, a magnetic design optimization for the double-D power pad based on finite-element analysis is achieved. The nonlinearities in the BIWPTS due to the magnetic material and the high-frequency components are investigated rely on a physics-based co-simulation platform. Also, a novel two-layer predictive power-flow controller that manages the bidirectional power-flow between the EV and grid is developed, implemented and tested. In addition, the feasibility of deploying the quasi-dynamic wireless power transfer technology on the road to charge the EV during the transient stops at the traffic signals is proven

Optimization of Roadway Electrification Integrating Wireless Power Transfer: TechnoEconomic Assessment and Lifecycle Analysis

Electric vehicles are the main technology currently being pursued to reduce dependence on fossil fuels in the transportation sector. These vehicles provide both reduced greenhouse gas emissions and decreased operating costs when compared to conventional internal combustion vehicles, while providing the flexibility to use both renewable and fossil energy. However, these vehicles have seen limited consumer adoption due to their large purchase prices and limited driving range. Both purchase price and driving range are related to the large onboard battery systems required for electric vehicle travel. One solution to decrease dependence on large battery systems has focused on charging vehicles in-motion using wireless power transfer. In-motion charging of electric vehicles would allow for longer range travel with smaller onboard battery systems which would lead to cheaper vehicles and, in turn, greater consumer acceptance. Wireless power transfer is commonly used for small electronics (i.e. cell phones), but has seen limited use on large scale projects. Therefore, limited work has been done to understand the feasibility of in-motion charging of electric vehicles using wireless power transfer. The goal of this thesis is to better understand the economic feasibility, environmental benefit, and infrastructure requirements of a wirelessly charged electric vehicle fleet for transportation in the United States

Life Cycle Analysis and Optimization of Wireless Charging Technology to Enhance Sustainability of Electric and Autonomous Vehicle Fleets

The transportation sector is undergoing a major transformation. Emerging technologies play indispensable roles in driving this mobility shift, including vehicle electrification, connection, and automation. Among them, wireless power transfer (WPT) technology, or commonly known as wireless charging technology, is in the spotlight in recent years for its applicability in charging electric vehicles (EVs). On one hand, WPT for EVs can solve some of the key challenges in EV development, by: (1) reducing range anxiety of EV owners by allowing “charging while driving”; and (2) downsizing the EV battery while still fulfilling the same trip distance. More en-route wireless charging opportunities result in battery downsizing, which reduces the high EV price and vehicle weight and improves fuel economy. On the other hand, WPT infrastructure deployment is expensive and resource-intensive, and results in significant economic, environmental, and energy burdens, which can offset these benefits. This research aims to develop and apply a life cycle analysis and optimization framework to examine the role of wireless charging technology in driving sustainable mobility. This research highlights the technology trade-offs and bridges the gap between technology development and deployment by establishing an integrated life cycle assessment and life cycle cost (LCA-LCC) model framework to characterize and evaluate the economic, environmental, and energy performance of WPT EV systems vs. conventional plug-in charging EV systems. Life cycle optimization (LCO) techniques are used to improve the life cycle performance of WPT EV fleets. Based on case studies, this research draws observations and conditions under which wireless charging technology has potential to improve life cycle environmental, energy, and economic performance of electric vehicle fleets. This study begins with developing LCA-LCC and LCO models to evaluate stationary wireless power transfer (SWPT) for transit bus systems. Based on a case study of Ann Arbor bus systems, the wirelessly charged battery can be downsized to 27–44% of a plug-in charged battery, resulting in vehicle lightweighting and fuel economy improvement in the use phase that cancels out the burdens of large-scale infrastructure. Optimal siting strategies of WPT bus charging stations reduced life cycle costs, greenhouse gases (GHG), and energy by up to 13%, 8%, and 8%, respectively, compared to extreme cases of “no charger at any bus stop” and “chargers at every stop”. Next, the LCA-LCC and LCO model framework is applied to evaluate the economic, energy, and environmental feasibility of dynamic wireless power transfer (DWPT) for charging passenger cars on highways and urban roadways. A case study of Washtenaw County indicates that optimal deployment of DWPT electrifying up to about 3% of total roadway lane-miles reduces life cycle GHG emissions and energy by up to 9.0% and 6.8%, respectively, and enables downsizing of the EV battery capacity by up to 48% compared to the non-DWPT scenarios and boosts EV market penetration to around 50% of all vehicles in 20 years. Finally, synergies of WPT and autonomous driving technologies in enhancing sustainable mobility are demonstrated using the LCA framework. Compared to a plug-in charging battery electric vehicle system, a wireless charging and shared automated battery electric vehicle (W+SABEV) system will pay back GHG emission burdens of additional infrastructure deployment within 5 years if the wireless charging utility factor is above 19%.PHDNatural Resources & EnvironmentUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147602/1/bizc_1.pd

A comprehensive study of key Electric Vehicle (EV) components, technologies, challenges, impacts, and future direction of development

Abstract: Electric vehicles (EV), including Battery Electric Vehicle (BEV), Hybrid Electric Vehicle (HEV), Plug-in Hybrid Electric Vehicle (PHEV), Fuel Cell Electric Vehicle (FCEV), are becoming more commonplace in the transportation sector in recent times. As the present trend suggests, this mode of transport is likely to replace internal combustion engine (ICE) vehicles in the near future. Each of the main EV components has a number of technologies that are currently in use or can become prominent in the future. EVs can cause significant impacts on the environment, power system, and other related sectors. The present power system could face huge instabilities with enough EV penetration, but with proper management and coordination, EVs can be turned into a major contributor to the successful implementation of the smart grid concept. There are possibilities of immense environmental benefits as well, as the EVs can extensively reduce the greenhouse gas emissions produced by the transportation sector. However, there are some major obstacles for EVs to overcome before totally replacing ICE vehicles. This paper is focused on reviewing all the useful data available on EV configurations, battery energy sources, electrical machines, charging techniques, optimization techniques, impacts, trends, and possible directions of future developments. Its objective is to provide an overall picture of the current EV technology and ways of future development to assist in future researches in this sector

Roadway-Embedded Transmitters and Multi-Pad Receivers for High Power Dynamic Wireless Power Transfer

Electric vehicles (EVs) offer considerable economic and environmental benefits to society. Despite the decreasing vehicle costs and increasing range of newer EVs, the problem of range anxiety still exists. Range anxiety, at its core, is an issue of charging speeds rather than a concern about the driving range. Dynamic wireless charging of EVs is seen as a potential solution to this issue of range anxiety. Further, wireless charging technology also helps the push towards level 5 autonomy and opens new opportunities for how an EV can be utilized. Dynamic wireless power transfer (DWPT) systems typically require a high initial investment due to the scale of deployment needed and require a certain level of EV adoption before they become economically viable. The challenges facing DWPT technologies are broadly categorized into development, deployment and operation challenges. To address the deployment challenges, this dissertation presents the pavement integration of DWPT systems, and the design and validation of concrete-embedded wireless charging pads. To improve infrastructure utilization and address the operation challenge, different vehicle classes need to recharge from the same charging infrastructure. This is made possible by the use of multi-pad receivers, which allow different vehicle classes to receive different power levels using the same charging infrastructure. This work presents a scaled-down version of a multi-pad receiver system to demonstrate the operation and scalability of these modular receivers. To help further reduce the cost of development and implementation of DWPT systems, finite element method (FEM) and circuit simulation models are presented. The time-domain simulations can be used to develop and validate various control and communication schemes without the need for expensive hardware implementation. Finally, leakage magnetic field reduction to ensure safety and compliance for DWPT systems is discussed, and an example system is analyzed using FEM simulations

Battery Management System for Future Electric Vehicles

The future of electric vehicles relies nearly entirely on the design, monitoring, and control of the vehicle battery and its associated systems. Along with an initial optimal design of the cell/pack-level structure, the runtime performance of the battery needs to be continuously monitored and optimized for a safe and reliable operation and prolonged life. Improved charging techniques need to be developed to protect and preserve the battery. The scope of this Special Issue is to address all the above issues by promoting innovative design concepts, modeling and state estimation techniques, charging/discharging management, and hybridization with other storage components

Secure Large Scale Penetration of Electric Vehicles in the Power Grid

As part of the approaches used to meet climate goals set by international environmental agreements, policies are being applied worldwide for promoting the uptake of Electric Vehicles (EV)s. The resulting increase in EV sales and the accompanying expansion in the EV charging infrastructure carry along many challenges, mostly infrastructure-related. A pressing need arises to strengthen the power grid to handle and better manage the electricity demand by this mobile and geo-distributed load. Because the levels of penetration of EVs in the power grid have recently started increasing with the increase in EV sales, the real-time management of en-route EVs, before they connect to the grid, is quite recent and not many research works can be found in the literature covering this topic comprehensively. In this dissertation, advances and novel ideas are developed and presented, seizing the opportunities lying in this mobile load and addressing various challenges that arise in the application of public charging for EVs. A Bilateral Decision Support System (BDSS) is developed here for the management of en-route EVs. The BDSS is a middleware-based MAS that achieves a win-win situation for the EVs and the power grid. In this framework, the two are complementary in a way that the desired benefit of one cannot be achieved without attaining that of the other. A Fuzzy Logic based on-board module is developed for supporting the decision of the EV as to which charging station to charge at. GPU computing is used in the higher-end agents to handle the big amount of data resulting in such a large scale system with mobile and geo-distributed nodes. Cyber security risks that threaten the BDSS are assessed and measures are applied to revoke possible attacks. Furthermore, the Collective Distribution of Mobile Loads (CDML), a service with ancillary potential to the power system, is developed. It comprises a system-level optimization. In this service, the EVs requesting a public charging session are collectively redistributed onto charging stations with the objective of achieving the optimal and secure operation of the power system by reducing active power losses in normal conditions and mitigating line congestions in contingency conditions. The CDML uses the BDSS as an industrially viable tool to achieve the outcomes of the optimization in real time. By participating in this service, the EV is considered as an interacting node in the system-wide communication platform, providing both enhanced self-convenience in terms of access to public chargers, and contribution to the collective effort of providing benefit to the power system under the large scale uptake of EVs. On the EV charger level, several advantages have been reported favoring wireless charging of EVs over wired charging. Given that, new techniques are presented that facilitate the optimization of the magnetic link of wireless EV chargers while considering international EMC standards. The original techniques and developments presented in this dissertation were experimentally verified at the Energy Systems Research Laboratory at FIU

Vehicle electrification: technologies, challenges and a global perspective for smart grids

Nowadays, due to economic and climate concerns, the private transportation sector is shifting for the vehicle electrification, mainly supported by electric and hybrid plug-in vehicles. For this new reality, new challenges about operation modes are emerging, demanding a cooperative and dynamic operation with the electrical power grid, guaranteeing a stable integration without omitting the power quality for the grid-side and for the vehicle-side. Besides the operation modes, new attractive and complementary technologies are offered by the vehicle electrification in the context of smart grids, which are valid for both on-board and off-board systems. In this perspective, this book chapter presents a global perspective and deals with challenges for the vehicle electrification, covering the key technologies toward a sustainable future. Among others, the flowing topics are covered: (1) Overview of power electronics structures for battery charging systems, including on-board and off-board systems; (2) State-of-the-art of communication technologies for application in the context of vehicular electrification, smart grids and smart homes; (3) Challenges and opportunities concerning wireless power transfer with bidirectional interface to the electrical grid; (4) Future perspectives about bidirectional power transfer between electric vehicles (vehicle-to-vehicle operation mode); (5) Unified technologies, allowing to combine functionalities of a bidirectional interface with the electrical grid and motor driver based on a single system; and (6) Smart grids and smart homes scenarios and accessible opportunities about operation modes.Fundação para a Ciência e Tecnologia (FCT

Urban and extra-urban hybrid vehicles: a technological review

Pollution derived from transportation systems is a worldwide, timelier issue than ever. The abatement actions of harmful substances in the air are on the agenda and they are necessary today to safeguard our welfare and that of the planet. Environmental pollution in large cities is approximately 20% due to the transportation system. In addition, private traffic contributes greatly to city pollution. Further, “vehicle operating life” is most often exceeded and vehicle emissions do not comply with European antipollution standards. It becomes mandatory to find a solution that respects the environment and, realize an appropriate transportation service to the customers. New technologies related to hybrid –electric engines are making great strides in reducing emissions, and the funds allocated by public authorities should be addressed. In addition, the use (implementation) of new technologies is also convenient from an economic point of view. In fact, by implementing the use of hybrid vehicles, fuel consumption can be reduced. The different hybrid configurations presented refer to such a series architecture, developed by the researchers and Research and Development groups. Regarding energy flows, different strategy logic or vehicle management units have been illustrated. Various configurations and vehicles were studied by simulating different driving cycles, both European approval and homologation and customer ones (typically municipal and university). The simulations have provided guidance on the optimal proposed configuration and information on the component to be used