963 research outputs found

    Design and Construction Modifications of Switched Reluctance Machines

    Get PDF
    Although the design principles of the Switched Reluctance Machines (SRMs) are available in different fragments in numerous bibliography positions, there no exists the complex design procedure of whole drive system taking into account the SR Machine, control system and supply device as well. The hybrid design method for SRM drives with application of new analytical calculation methods, finite element method and simulation models is proposed in this thesis. The calculation/design system is characterised by important effectivity and reliability. The new possibilities in analytical determination of saturation effects and core losses under various modes of control, including sensorless method, are also taken into account. The correctness of the proposed design algorithms are verified by laboratory tests made on three motor prototypes manufactured in industry for concrete application. This dissertation provides the elements indispensable for more accurate and complex analysis and design of drives with switch reluctance motors. The elements of electrical motor and control system design as well as the considerations on the choice of supply device and controller subsystems are jointed in the thesis for final receiving of the design tool for considered industrial drive system

    Control of switched reluctance machines

    Get PDF
    This thesis is concerned with the control of switched reluctance machines for both motoring and generating applications. There are different control objectives in each case. For motoring operation, there are two possible control objectives. If the SRM is being employed in a servo-type application, the desire is for a constant output torque. However, for low performance applications where some amount of torque ripple is acceptable, the aim is to achieve efficient and accurate speed regulation. When the SRM is employed for generating purposes, the goal is to maintain the dc bus voltage at the required value while achieving maximum efficiency. Preliminary investigative work on switched reluctance machine control in both motoring and generating modes is performed. This includes the implementation and testing through simulation of two control strategies described in the literature. In addition, an experimental system is built for the development and testing of new control strategies. The inherent nonlinearity of the switched reluctance machine results in ripple in the torque profile. This adversely affects motoring performance for servo-type applications. Hence, three neuro-fuzzy control strategies for torque ripple minimisation in switched reluctance motors are developed. For all three control strategies, the training of a neurofuzzy compensator and the incorporation of the trained compensator into the overall switched reluctance drive are described. The performance of the control strategies in reducing the torque ripple is examined with simulations and through experimental testing. While the torque ripple is troublesome for servo-type applications, there are some applications where a certain amount of torque ripple is acceptable. Therefore, four simple motor control strategies for torque ripple-tolerant applications are described and tested experimentally. Three of the control strategies are for low speed motoring operation while the fourth is aimed at high speed motoring operation. Finally, three closed-loop generator control strategies aimed at high speed operation in single pulse mode are developed. The three control strategies are examined by testing on the experimental system. A comparison of the performance of the control strategies in terms of efficiency and peak current produced by each is presented

    Switched Reluctance Motor

    Get PDF

    Modelling and Control of Switched Reluctance Machines

    Get PDF
    Today, switched reluctance machines (SRMs) play an increasingly important role in various sectors due to advantages such as robustness, simplicity of construction, low cost, insensitivity to high temperatures, and high fault tolerance. They are frequently used in fields such as aeronautics, electric and hybrid vehicles, and wind power generation. This book is a comprehensive resource on the design, modeling, and control of SRMs with methods that demonstrate their good performance as motors and generators

    Modelling and Control of Switched Reluctance Machines

    Get PDF
    Today, switched reluctance machines (SRMs) play an increasingly important role in various sectors due to advantages such as robustness, simplicity of construction, low cost, insensitivity to high temperatures, and high fault tolerance. They are frequently used in fields such as aeronautics, electric and hybrid vehicles, and wind power generation. This book is a comprehensive resource on the design, modeling, and control of SRMs with methods that demonstrate their good performance as motors and generators

    Computing Torque and Related Output Variables of a Switched ReluctanceMachine Using a Magnetic Circuit Approach

    Get PDF
    The normal procedure industry employs in designing a Switched Reluctance Machine (SRM) is to construct and test a prototype to determine the machine\u27s actual output characteristics. This procedure is time-consuming and does not allow for an accurate insight into machine dynamics. This research project consists of an analytical method for determining torque, current, and flux linkages of an SRM. A magnetic circuit modelling approach is employed for this research and the machine dimension parameters of the SRM as well as the B-H curve magnetization characteristics are utilized. The objective of the magnetic circuit modelling approach is to obtain results which will be comparable to a machine modelled using the finite element method of flux determination. The magnetic circuit analysis uses a systematic approach for calculating the reluctances of the air gap between the stator and rotor poles in a typical SRM. The end result of the magnetic circuit model is a non-linear function with respect to flux. The operating characteristics of the SRM are modelled mathematically by using first-order differential equations of flux linkages with respect to current and rotor position. Rapid speed in calculation of the operating characteristics of an SRM results from the precalculation of the flux linkage to current relationship

    Design of Outrunner Eectric Machines for Green Energy Applications

    Get PDF
    Interests in using rare-earth free motors such as switched reluctance motors (SRMs) for electric and hybrid electric vehicles (EV/HEVs) continue to gain popularity, owing to their low cost and robustness. Optimal design of an SRM, to meet specific characteristics for an application, should involve simultaneous optimization of the motor geometry and control in order to achieve the highest performance with the lowest cost. This dissertation firstly presents a constrained multi-objective optimization framework for design and control of a SRM based on a non-dominated sorting genetic algorithm II (NSGA-II). The proposed methodology optimizes SRM operation for high volume traction applications by considering multiple criteria including efficiency, average torque, and torque ripple. Several constraints are defined by the application considered, such as the motor stack length, minimum desired efficiency, etc. The outcome of this optimization includes an optimal geometry, outlining variables such as air gap length, rotor inner diameter, stator pole arc angle, etc as well as optimal turn-on and turn-off firing angles. Then the machine is manufactured according to the obtained optimal specifications. Finite element analysis (FEA) and experimental results are provided to validate the theoretical findings. A solution for exploring optimal firing angles of nonlinear current-controlled SRMs is proposed in order to minimize the torque ripple. Motor torque ripple for a certain electrical load requirement is minimized using a surrogate-based optimization of firing angles by adjusting the motor geometry, reference current, rotor speed and dc bus voltage. Surrogate-based optimization is facilitated via Neural Networks (NN) which are regression tools capable of learning complex multi-variate functions. Flux and torque of the nonlinear SRM is learned as a function of input parameters, and consequently the computation time of design, which is crucial in any micro controller unit, is expedited by replacing the look-up tables of flux and torque with the surrogate NN model. This dissertation then proposes a framework for the design and analysis of a coreless permanent magnet (PM) machine for a 100 kWh shaft-less high strength steel flywheel energy storage system (SHFES). The PM motor/generator is designed to meet the required specs in terms of torque-speed and power-speed characteristics given by the application. The design challenges of a motor/generator for this architecture include: the poor flux paths due to a large scale solid carbon steel rotor and zero-thermal convection of the airgap due to operation of the machine in vacuum. Magnetic flux in this architecture tends to be 3-D rather than constrained due to lack of core in the stator. In order to tackle these challenges, several other parameters such as a proper number of magnets and slots combination, number of turns in each coil, magnets with high saturated flux density and magnets size are carefully considered in the proposed design framework. Magnetic levitation allows the use of a coreless stator that is placed on a supporting structure. The proposed PM motor/generator comprehensive geometry, electromagnetic and mechanical dimensioning are followed by detailed 3-D FEA. The torque, power, and speed determined by the FEA electromagnetic analysis are met by the application design requirements and constraints for both the charging and discharging modes of operation. Finally, the motor/generator static thermal analysis is discussed in order to validate the proposed cooling system functionality

    Fuzzy Logic Control of Switched Reluctance Motor Drives

    Get PDF
    In this chapter, the electromechanical behavior of switched reluctance motor (SRM) is first modeled by analyzing the related nonlinear differential equations. In the model, the estimation of rotor speed is also considered. After modeling, the effects of torque ripple, radial force, and acoustic noise are investigated. As we know, torque ripple and acoustic noise are two of the main disadvantages of a switched reluctance motor. Thus, a fuzzy logic current compensator is proposed both for reducing the peak of radial force and for decreasing acoustic noise effects. In the parts that torque reduces, the fuzzy logic current compensator injects additional current for each phase current to overcome the torque ripple. Also, the fuzzy logic current compensator reduces speed estimation error. The speed estimation is carried out using a hybrid sliding mode observer which estimates the rotor position and speed for a wide speed range. These new approaches have been simulated using MATLAB/SIMULINK for a nonlinear model of switched reluctance motor. The simulation results indicate that proposed methods decrease the maximum radial force and the torque ripple while the maximum torque is preserved. Also, these results show that proposed methods will estimate the rotor position and speed with high precision for all speeds from near zero speeds up to rated speed. These procedures have the advantages of simple implementation on the every switched reluctance motor drive without extra hardware, low cost, high reliability, low vibration, and excellent performance at long term
    corecore