Measurement-based reliability prediction methodology

In the past, analytical and measurement based models were developed to characterize computer system behavior. An open issue is how these models can be used, if at all, for system design improvement. The issue is addressed here. A combined statistical/analytical approach to use measurements from one environment to model the system failure behavior in a new environment is proposed. A comparison of the predicted results with the actual data from the new environment shows a close correspondence

Dependability analysis of systems with on-demand and active failure modes, using dynamic fault trees

Safety systems and protection systems can experience two phases of operation (standby and active); an accurate dependability analysis must combine an analysis of both phases. The standby mode can last for a long time, during which the safety system is periodically tested and maintained. Once a demand occurs, the safety system must operate successfully for the length of demand. The failure characteristics of the system are different in the two phases, and the system can fail in two ways: 1) It can fail to start (fail on-demand), or 2) It can fail while in active mode. Failure on demand requires an availability analysis of components (typically electromechanical components) which are required to start or support the safety system. These support components are usually maintained periodically while not in active use. Active failure refers to the failure while running (once started) of the active components of the safety system. These active components can be fault tolerant and use spares or other forms of redundancy, but are not maintainable while in use. The approach, in this paper, automatically combines the “availability analysis of the system in standby mode” with the “reliability analysis of the system in its active mode.” The general approach uses an availability analysis of the standby phase to determine the initial state probabilities for a Markov model of the demand phase. A detailed method is presented in terms of a dynamic fault-tree model. A new “dynamic fault-tree construct” captures the dependency of the demand-components on the support systems, which are required to detect the demand or to start the demand system. The method is discussed using a single example sprinkler system and then applied to a more complete system taken from the offshore industry

Performability: a retrospective and some pointers to the future

As computing and communication systems become physically and logically more complex, their evaluation calls for continued innovation with regard to measure definition, model construction/solution, and tool development. In particular, the performance of such systems is often degradable, i.e., internal or external faults can reduce the quality of a delivered service even though that service, according to its specification, remains proper (failure-free). The need to accommodate this property, using model-based evaluation methods, was the raison d'etre for the concept of performability. To set the stage for additional progress in its development, we present a retrospective of associated theory, techniques, and applications resulting from work in this area over the past decade and a half. Based on what has been learned, some pointers are made to future directions which might further enhance the effectiveness of these methods and broaden their scope of applicability.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/30223/1/0000615.pd

A real-time diagnostic and performance monitor for UNIX

There are now over one million UNIX sites and the pace at which new installations are added is steadily increasing. Along with this increase, comes a need to develop simple efficient, effective and adaptable ways of simultaneously collecting real-time diagnostic and performance data. This need exists because distributed systems can give rise to complex failure situations that are often un-identifiable with single-machine diagnostic software. The simultaneous collection of error and performance data is also important for research in failure prediction and error/performance studies. This paper introduces a portable method to concurrently collect real-time diagnostic and performance data on a distributed UNIX system. The combined diagnostic/performance data collection is implemented on a distributed multi-computer system using SUN4's as servers. The approach uses existing UNIX system facilities to gather system dependability information such as error and crash reports. In addition, performance data such as CPU utilization, disk usage, I/O transfer rate and network contention is also collected. In the future, the collected data will be used to identify dependability bottlenecks and to analyze the impact of failures on system performance

Simulation and implementation of novel deep learning hardware architectures for resource constrained devices

Corey Lammie designed mixed signal memristive-complementary metal–oxide–semiconductor (CMOS) and field programmable gate arrays (FPGA) hardware architectures, which were used to reduce the power and resource requirements of Deep Learning (DL) systems; both during inference and training. Disruptive design methodologies, such as those explored in this thesis, can be used to facilitate the design of next-generation DL systems

Teenustele orienteeritud ja tõendite-teadlik mobiilne pilvearvutus

Arvutiteaduses on kaks kõige suuremat jõudu: mobiili- ja pilvearvutus. Kui pilvetehnoloogia pakub kasutajale keerukate ülesannete lahendamiseks salvestus- ning arvutusplatvormi, siis nutitelefon võimaldab lihtsamate ülesannete lahendamist mistahes asukohas ja mistahes ajal. Täpsemalt on mobiilseadmetel võimalik pilve võimalusi ära kasutades energiat säästa ning jagu saada kasvavast jõudluse ja ruumi vajadusest. Sellest tulenevalt on käesoleva töö peamiseks küsimuseks kuidas tuua pilveinfrastruktuur mobiilikasutajale lähemale? Antud töös uurisime kuidas mobiiltelefoni pilveteenust saab mobiilirakendustesse integreerida. Saime teada, et töö delegeerimine pilve eeldab mitmete pilve aspektide kaalumist ja integreerimist, nagu näiteks ressursimahukas töötlemine, asünkroonne suhtlus kliendiga, programmaatiline ressursside varustamine (Web APIs) ja pilvedevaheline kommunikatsioon. Nende puuduste ületamiseks lõime Mobiilse pilve vahevara Mobile Cloud Middleware (Mobile Cloud Middleware - MCM) raamistiku, mis kasutab deklaratiivset teenuste komponeerimist, et delegeerida töid mobiililt mitmetele pilvedele kasutades minimaalset andmeedastust. Teisest küljest on näidatud, et koodi teisaldamine on peamisi strateegiaid seadme energiatarbimise vähendamiseks ning jõudluse suurendamiseks. Sellegipoolest on koodi teisaldamisel miinuseid, mis takistavad selle laialdast kasutuselevõttu. Selles töös uurime lisaks, mis takistab koodi mahalaadimise kasutuselevõttu ja pakume lahendusena välja raamistiku EMCO, mis kogub seadmetelt infot koodi jooksutamise kohta erinevates kontekstides. Neid andmeid analüüsides teeb EMCO kindlaks, mis on sobivad tingimused koodi maha laadimiseks. Võrreldes kogutud andmeid, suudab EMCO järeldada, millal tuleks mahalaadimine teostada. EMCO modelleerib kogutud andmeid jaotuse määra järgi lokaalsete- ning pilvejuhtude korral. Neid jaotusi võrreldes tuletab EMCO täpsed atribuudid, mille korral mobiilirakendus peaks koodi maha laadima. Võrreldes EMCO-t teiste nüüdisaegsete mahalaadimisraamistikega, tõuseb EMCO efektiivsuse poolest esile. Lõpuks uurisime kuidas arvutuste maha laadimist ära kasutada, et täiustada kasutaja kogemust pideval mobiilirakenduse kasutamisel. Meie peamiseks motivatsiooniks, et sellist adaptiivset tööde täitmise kiirendamist pakkuda, on tagada kasutuskvaliteet (QoE), mis muutub vastavalt kasutajale, aidates seeläbi suurendada mobiilirakenduse eluiga.Mobile and cloud computing are two of the biggest forces in computer science. While the cloud provides to the user the ubiquitous computational and storage platform to process any complex tasks, the smartphone grants to the user the mobility features to process simple tasks, anytime and anywhere. Smartphones, driven by their need for processing power, storage space and energy saving are looking towards remote cloud infrastructure in order to solve these problems. As a result, the main research question of this work is how to bring the cloud infrastructure closer to the mobile user? In this thesis, we investigated how mobile cloud services can be integrated within the mobile apps. We found out that outsourcing a task to cloud requires to integrate and consider multiple aspects of the clouds, such as resource-intensive processing, asynchronous communication with the client, programmatically provisioning of resources (Web APIs) and cloud intercommunication. Hence, we proposed a Mobile Cloud Middleware (MCM) framework that uses declarative service composition to outsource tasks from the mobile to multiple clouds with minimal data transfer. On the other hand, it has been demonstrated that computational offloading is a key strategy to extend the battery life of the device and improves the performance of the mobile apps. We also investigated the issues that prevent the adoption of computational offloading, and proposed a framework, namely Evidence-aware Mobile Computational Offloading (EMCO), which uses a community of devices to capture all the possible context of code execution as evidence. By analyzing the evidence, EMCO aims to determine the suitable conditions to offload. EMCO models the evidence in terms of distributions rates for both local and remote cases. By comparing those distributions, EMCO infers the right properties to offload. EMCO shows to be more effective in comparison with other computational offloading frameworks explored in the state of the art. Finally, we investigated how computational offloading can be utilized to enhance the perception that the user has towards an app. Our main motivation behind accelerating the perception at multiple response time levels is to provide adaptive quality-of-experience (QoE), which can be used as mean of engagement strategy that increases the lifetime of a mobile app

Aeronautical engineering: A continuing bibliography with indexes (supplement 212)

This bibliography lists 493 reports, articles and other documents introduced into the NASA scientific and technical information system in March, 1987

Pricing the Cloud: An Auction Approach

Cloud computing has changed the processing and service modes of information communication technology and has affected the transformation, upgrading and innovation of the IT-related industry systems. The rapid development of cloud computing in business practice has spawned a whole new field of interdisciplinary, providing opportunities and challenges for business management research. One of the critical factors impacting cloud computing is how to price cloud services. An appropriate pricing strategy has important practical means to stakeholders, especially to providers and customers. This study addressed and discussed research findings on cloud computing pricing strategies, such as fixed pricing, bidding pricing, and dynamic pricing. Another key factor for cloud computing is Quality of Service (QoS), such as availability, reliability, latency, security, throughput, capacity, scalability, elasticity, etc. Cloud providers seek to improve QoS to attract more potential customers; while, customers intend to find QoS matching services that do not exceed their budget constraints. Based on the existing study, a hybrid QoS-based pricing mechanism, which consists of subscription and dynamic auction design, is proposed and illustrated to cloud services. The results indicate that our hybrid pricing mechanism has potential to better allocate available cloud resources, aiming at increasing revenues for providers and reducing expenses for customers in practice

Aeronautical engineering: A continuing bibliography with indexes (supplement 259)

This bibliography lists 774 reports, articles, and other documents introduced into the NASA scientific and technical information system in November, 1990. Subject coverage includes: design, construction and testing of aircraft and aircraft engines; aircraft components, equipment and systems; ground support systems; and theoretical and applied aspects of aerodynamics and general fluid dynamics

A cumulative index to a continuing bibliography on aeronautical engineering

This bibliography is a cumulative index to the abstracts contained in NASA-SP-7037(184) through NASA-SP-7037(195) of Aeronautical Engineering: A Continuing Bibliography. NASA SP-7037 and its supplements have been compiled through the cooperative efforts of the American Institute of Aeronautics and Astronautics (AIAA) and the National Aeronautics and Space Administration (NASA). This cumulative index includes subject, personal author, corporate source, foreign technology, contract, report number, and accession number indexes