Three-dimensional finite element analysis of anterior two-unit cantilever resin-bonded fixed dental prostheses

The aim of this study was to evaluate the influence of different framework materials on biomechanical behaviour of anterior two-unit cantilever resin-bonded fixed dental prostheses (RBFDPs). A three-dimensional finite element model of a two-unit cantilever RBFDP replacing amaxillary lateral incisorwas created. Five frameworkmaterialswere evaluated: direct fibre-reinforced composite (FRC-Z250), indirect fibre-reinforced composite (FRC-ES), gold alloy (M), glass ceramic (GC), and zirconia (ZI). Finite element analysis was performed and stress distribution was evaluated. A similar stress pattern, with stress concentrations in the connector area, was observed in RBFDPs for all materials.Maximal principal stress showed a decreasing order: ZI >M>GC> FRC-ES > FRCZ250. The maximum displacement of RBFDPs was higher for FRC-Z250 and FRC-ES than for M, GC, and ZI. FE analysis depicted differences in location of the maximum stress at the luting cement interface between materials. For FRC-Z250 and FRC-ES, the maximum stress was located in the upper part of the proximal area of the retainer, whereas, for M, GC, and ZI, the maximum stress was located at the cervical outline of the retainer. The present study revealed differences in biomechanical behaviour between all RBFDPs.The general observation was that a RBFDP made of FRC provided a more favourable stress distribution

Metal-to-ceramic seals for thermionic converters - A literature survey

Metal to ceramic sealing techniques for thermionic converters - literature surve

EXPLORING THE USE OF PULSED ERBIUM LASERS TO RETRIEVE A ZIRCONIA CROWN FROM A ZIRCONIA IMPLANT ABUTMENT

Removal of zirconia crowns, commonly used as cement-retained implant fixed restorations, can be challenging. Conventional methods of crown removal are time consuming and often leave irreparable damage to the crown, which can be costly to patients and practitioners. This research explored the use of two different types of pulsed erbium lasers, erbium-doped yttrium aluminum garnet laser (Er:YAG) and erbium, chromium-doped yttrium, scandium, gallium and garnet (Er,Cr:YSGG), as non-invasive tools to retrieve cemented zirconia crowns from zirconia implant abutments. Times needed to remove the crowns were recorded and analyzed using ANOVA (��=0.05). No statistical differences between the debond times of each laser were observed. The surfaces of the crown and the abutment were further examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) examination. SEM and EDS examinations of the materials showed no visual surface damaging or material alteration from the two pulsed erbium lasers

Influence of phosphoric acid surface treatment on shear bond strength durability of resin cement to zirconia-based ceramic conditioned with different primers

Indiana University-Purdue University Indianapolis (IUPUI)BACKGROUND: Phosphoric acid treatment has been reported to be relevant for zirconia cleaning after contamination. However, its interaction with different primers is not well known and needs to be investigated. OBJECTIVES: To compare the shear bond strengths (SBS) of resin cement to Y-TZP after phosphoric acid pretreatment and different chemical conditioning protocols, and to test the durability of SBSs after long term storage and thermal cycling conditions. To investigate the effect of phosphoric acid 75 on the surface roughness of a yttrium-stabilized tetragonal zirconia polycrystal ceramic (Y-TZP). METHODS: Sixty bars of zirconia (30 X 5 X 2 mm) were polished and glued to acrylic tubes. Each bar received 3 different surface treatments (control, phosphoric acid and air-abrasion). The bars were randomly assigned into five groups according to different primers applied (No primer, Clearfil ceramic primer, Monobond Plus, Z-prime plus and AZ primer). After that, resin cement was mixed, injected into a mold, and light cured. The specimens were tested in shear on a universal testing machine. Half of the specimens were tested after 24 h water storage and the other half were tested after 90 days of water storage and thermocycling. Non-contact profilometer was used to assess the effect of the three surface pretreatments on surface roughness of zirconia. Mode of failure and surface roughness were evaluated with SEM. Statistical analyses were conducted with mixed-model ANOVA and chi-square tests. RESULTS: The results indicated that Monobond Plus primer showed higher SBS after phosphoric acid treatment compared to other primers used. SBS of all air abrasion groups were higher than phosphoric acid groups. Long term water storage and thermocycling led to a statistically significant decrease in SBS for all groups except Monobond Plus, Z-prime plus and AZ primer after air abrasion treatment. Surface roughness measurements showed no significant differences among the surface treatments. CONCLUSION: Monobond Plus provided the highest SBS to zirconia after phosphoric acid treatment. The findings suggest that the air abrasion is the best surface treatment after contamination of zirconia surface. Monobond Plus, Z-prime plus and AZ primer showed durable SBS after air abrasion treatment and aging process

Zirconia in fixed prosthesis. A literature review

Statement of problem: Evidence is limited on the efficacy of zirconia-based fixed dental prostheses. Objective: To carry out a literature review of the behavior of zirconium oxide dental restorations. Material and Methods: This literature review searched the Pubmed, Scopus, Medline and Cochrane Library databases using key search words 'zirconium oxide,' 'zirconia,' 'non-metal restorations,' 'ceramic oxides,' 'veneering ceramic,' 'zirconia-based fixed dental prostheses'. Both in vivo and in vitro studies into zirconia-based prosthodontic restoration behavior were included. Results: Clinical studies have revealed a high rate of fracture for porcelain-veneered zirconia-based restorations that varies between 6% and 15% over a 3- to 5-year period, while for ceramo-metallic restorations the fracture rate ranges between 4 and 10% over ten years. These results provoke uncertainty as to the long-term prognosis for this material in the oral medium. The cause of veneering porcelain fractures is unknown but hypothetically they could be associated with bond failure between the veneer material and the zirconia sub-structure

Post-fatigue fracture resistance of metal core crowns: press-on metal ceramic versus a conventional veneering system

Background: The aim of this in vitro study was to compare the mechanical failure behavior and to analyze fracture characteristics of metal ceramic crowns with two veneering systems – press-on metal (PoM) ceramic versus a conventional veneering system – subjected to static compressive loading. Material and Methods: Forty-six crowns were constructed and divided into two groups according to porcelain veneer manufacture. Group A: 23 metal copings with porcelain IPS-InLine veneering (conventional metal ceramic). Group B: 23 metal copings with IPS-InLine PoM veneering porcelain. After 120,000 fatigue cycles, the crowns were axially loaded to the moment of fracture with a universal testing machine. The fractured specimens were examined under optical stereomicroscopy and scanning electron microscope. Results: Fracture resistance values showed statistically significant differences (Student’s t-test) regarding the type of ceramic veneering technique ( p =0.001): Group A (conventional metal ceramics) obtained a mean fracture resistance of 1933.17 N, and Group B 1325.74N (Press-on metal ceramics). The most common type of fracture was adhesive failure (with metal exposure) ( p =0.000). Veneer porcelain fractured on the occlusal surface following a radial pattern. Conclusions: Metal ceramic crowns made of IPS InLine or IPS InLine PoM ceramics with different laboratory techniques all achieved above-average values for clinical survival in the oral environment according to ISO 6872. Crowns made with IPS InLine by conventional technique resisted fracture an average of 45% more than IPS InLine PoM fabricated with the press-on techniqu

Multiple teeth replacement with endosseous one-piece yttrium-stabilized zirconia dental implants

Objectives: The purpose of this study is to clinically and radiographically evaluate survival and success rate of multiple zirconia dental implants positioned in each patient during a follow-up period of at least 12 months up to 48 months. Study Design: Eight patients were treated for multiple edentulism with 29 zirconia dental implants. All implants received immediate temporary restorations and 6 months after surgery were definitively restored. 6 months to 4 years after implant insertion, a clinical-radiographic evaluation was performed in order to estimate peri-implant tissues health and peri-implant marginal bone loss. Results: Survival rate within follow-up period was therefore 100%. The average marginal bone loss (MBL) from baseline to 6 months was +1.375±0.388 mm; from 6 months to 1 year was +0.22±0.598 mm; from 1 year to 2 years was -0.368±0.387 mm; from 2 years to 3 years was -0.0669±0.425 mm; from 3 years to 4 years +0.048±0.262 mm. The mean marginal bone loss at 4 years from the implants insertion was +1.208 mm. Conclusions: According to several studies, when using a radiographic criterion for implant success, marginal bone loss below 0.9-1.6 mm during the first year in function can be considered acceptable. In our work, radiographic measurements of MBL showed values not exceeding 1.6 mm during the first year of loading and also 1 year up to 4 years after surgery further marginal bone loss was minimal and not significant. This peri-implant bone preservation may be associated to the absence of micro-gap between fixture and abutment since zirconia dental implants are one-piece implant. Moreover, zirconia is characterized by high biocompatibility and it accumulates significantly fewer bacteria than titanium

Ceramic applications in turbine engines

The design and testing of gas turbine engines employing ceramic components is discussed. Thermal shock and vibration test results as well as spin tests of various engine components are discussed

JT90 thermal barrier coated vanes

The technology of plasma sprayed thermal barrier coatings applied to turbine vane platforms in modern high temperature commercial engines was advanced to the point of demonstrated feasibility for application to commercial aircraft engines. The three thermal barrier coatings refined under this program are zirconia stabilized with twenty-one percent magnesia (21% MSZ), six percent yttria (6% YSZ), and twenty percent yttria (20% YSZ). Improvement in thermal cyclic endurance by a factor of 40 times was demonstrated in rig tests. A cooling system evolved during the program which featured air impingement cooling for the vane platforms rather than film cooling. The impingement cooling system, in combination with the thermal barrier coatings, reduced platform cooling air requirements by 44% relative to the current film cooling system. Improved durability and reduced cooling air requirements were demonstrated in rig and engine endurance tests. Two engine tests were conducted, one of 1000 cycles and the other of 1500 cycles. All three coatings applied to vanes fabricated with the final cooling system configuration completed the final 1500 cycle engine endurance test. Results of this test clearly demonstrated the durability of the 6% YSZ coating which was in very good condition after the test. The 21% MSZ and 20% YSZ coatings had numerous occurrences of significant spalling in the test

Management of bone defects with Bio-oss

Introduction: The defects in the alveolar bone might appear as a result of congenital malformations, traumatic injuries, periodontal disease, surgical traumas, chronic periapical changes and tumors from benign or malignant origin. The aim of this study was to provide solid and healthy area with application of Bio-Oss in the defect. Materials and methods: Based on the clinical diagnosisestablished by previously taken history, clinical examination and radiographic images oral-surgery interventions was made. To realize the aim of this work, augmentative material was implicated in the bone defects made in the patients after removal of follicular cyst, chronic periapical lesion, and parodontopathia. During the first and seventh day of the interventions, the patients have been followed through from aspect of possible development of local and general complications after the oral-surgery intervention. After period of one, three and six mount control x-ray was made. Results: Obtained results confirmed that: volume of the socket and defect of the bone was kept, fast revascularization was achieved, bone formation and slow resorption of the augmentative material was achieved, and period of normal healing without infection was also achieved. Conclusions: The augmentative materials used for treatment of bone defects besides their basic chemical and physical characteristics referring to their solubility in the body fluids, the transformation, modulation and resorption must be completely safe or secure, i.e. not to bring any risk of infection, immunological risk, physiological intolerance or inhibition of the process of restitutio ad integrum. In our study Bio-Oss was confirmed as augmentative material who had this characteristics. Keywords: bone defect, resorption of the bone, augmentative material, Bio-Os