4,578 research outputs found
Efficient AoA-based wireless indoor localization for hospital outpatients using mobile devices
The motivation of this work is to help outpatients find their corresponding departments or clinics, thus, it needs to provide indoor positioning services with a room-level accuracy. Unlike wireless outdoor localization that is dominated by the global positioning system (GPS), wireless indoor localization is still an open issue. Many different schemes are being developed to meet the increasing demand for indoor localization services. In this paper, we investigated the AoA-based wireless indoor localization for outpatients’ wayfinding in a hospital, where Wi-Fi access points (APs) are deployed, in line, on the ceiling. The target position can be determined by a mobile device, like a smartphone, through an efficient geometric calculation with two known APs coordinates and the angles of the incident radios. All possible positions in which the target may appear have been comprehensively investigated, and the corresponding solutions were proven to be the same. Experimental results show that localization error was less than 2.5 m, about 80% of the time, which can satisfy the outpatients’ requirements for wayfinding
Joint received signal strength, angle-of-arrival, and time-of-flight positioning
This paper presents a software positioning framework that is able to jointly use measured values of three parameters: the received signal strength, the angle-of-arrival, and the time-of-flight of the wireless signals. Based on experimentally determined measurement accuracies of these three parameters, results of a realistic simulation scenario are presented. It is shown that for the given configuration, angle-of-arrival and received signal strength measurements benefit from a hybrid system that combines both. Thanks to their higher accuracy, time-of-flight systems perform significantly better, and obtain less added value from a combination with the other two parameters
AoA-aware Probabilistic Indoor Location Fingerprinting using Channel State Information
With expeditious development of wireless communications, location
fingerprinting (LF) has nurtured considerable indoor location based services
(ILBSs) in the field of Internet of Things (IoT). For most pattern-matching
based LF solutions, previous works either appeal to the simple received signal
strength (RSS), which suffers from dramatic performance degradation due to
sophisticated environmental dynamics, or rely on the fine-grained physical
layer channel state information (CSI), whose intricate structure leads to an
increased computational complexity. Meanwhile, the harsh indoor environment can
also breed similar radio signatures among certain predefined reference points
(RPs), which may be randomly distributed in the area of interest, thus mightily
tampering the location mapping accuracy. To work out these dilemmas, during the
offline site survey, we first adopt autoregressive (AR) modeling entropy of CSI
amplitude as location fingerprint, which shares the structural simplicity of
RSS while reserving the most location-specific statistical channel information.
Moreover, an additional angle of arrival (AoA) fingerprint can be accurately
retrieved from CSI phase through an enhanced subspace based algorithm, which
serves to further eliminate the error-prone RP candidates. In the online phase,
by exploiting both CSI amplitude and phase information, a novel bivariate
kernel regression scheme is proposed to precisely infer the target's location.
Results from extensive indoor experiments validate the superior localization
performance of our proposed system over previous approaches
WiFi emission-based vs passive radar localization of human targets
In this paper two approaches are considered for human targets localization based on the WiFi signals: the device emission-based localization and the passive radar. Localization performance and characteristics of the two localization techniques are analyzed and compared, aiming at their joint exploitation inside sensor fusion systems. The former combines the Angle of Arrival (AoA) and the Time Difference of Arrival (TDoA) measures of the device transmissions to achieve the target position, while the latter exploits the AoA and the bistatic range measures of the target echoes. The results obtained on experimental data show that the WiFi emission-based strategy is always effective for the positioning of human targets holding a WiFi device, but it has a poor localization accuracy and the number of measured positions largely depends on the device activity. In contrast, the passive radar is only effective for moving targets and has limited spatial resolution but it provides better accuracy performance, thanks to the possibility to integrate a higher number of received signals. These results also demonstrate a significant complementarity of these techniques, through a suitable experimental test, which opens the way to the development of appropriate sensor fusion techniques
An indoor variance-based localization technique utilizing the UWB estimation of geometrical propagation parameters
A novel localization framework is presented based on ultra-wideband (UWB) channel sounding, employing a triangulation method using the geometrical properties of propagation paths, such as time delay of arrival, angle of departure, angle of arrival, and their estimated variances. In order to extract these parameters from the UWB sounding data, an extension to the high-resolution RiMAX algorithm was developed, facilitating the analysis of these frequency-dependent multipath parameters. This framework was then tested by performing indoor measurements with a vector network analyzer and virtual antenna arrays. The estimated means and variances of these geometrical parameters were utilized to generate multiple sample sets of input values for our localization framework. Next to that, we consider the existence of multiple possible target locations, which were subsequently clustered using a Kim-Parks algorithm, resulting in a more robust estimation of each target node. Measurements reveal that our newly proposed technique achieves an average accuracy of 0.26, 0.28, and 0.90 m in line-of-sight (LoS), obstructed-LoS, and non-LoS scenarios, respectively, and this with only one single beacon node. Moreover, utilizing the estimated variances of the multipath parameters proved to enhance the location estimation significantly compared to only utilizing their estimated mean values
Acoustical Ranging Techniques in Embedded Wireless Sensor Networked Devices
Location sensing provides endless opportunities for a wide range of applications in GPS-obstructed environments;
where, typically, there is a need for higher degree of accuracy. In this article, we focus on robust range
estimation, an important prerequisite for fine-grained localization. Motivated by the promise of acoustic in
delivering high ranging accuracy, we present the design, implementation and evaluation of acoustic (both
ultrasound and audible) ranging systems.We distill the limitations of acoustic ranging; and present efficient
signal designs and detection algorithms to overcome the challenges of coverage, range, accuracy/resolution,
tolerance to Doppler’s effect, and audible intensity. We evaluate our proposed techniques experimentally on
TWEET, a low-power platform purpose-built for acoustic ranging applications. Our experiments demonstrate
an operational range of 20 m (outdoor) and an average accuracy 2 cm in the ultrasound domain. Finally,
we present the design of an audible-range acoustic tracking service that encompasses the benefits of a near-inaudible
acoustic broadband chirp and approximately two times increase in Doppler tolerance to achieve better performance
- …