Giving Body to Digital Fashion Tools

‘Super technology is going to ask for super tactility’ (Lidewii Edelkoort). Exploring this statement, this chapter reflects on the disconnection between digital fashion tools that lack sensory feedback and the critical role of designers’ embodied experience for their practice. In order to support this discussion, additional literature is brought in, which shows that in dance bodily engagement is crucial for supporting and enhancing the creative process. This is done to explore aspects of mediation and embodiment further, and to propose a research agenda for the investigation of textile experience

Tactile Arrays for Virtual Textures

This thesis describes the development of three new tactile stimulators for active touch, i.e. devices to deliver virtual touch stimuli to the fingertip in response to exploratory movements by the user. All three stimulators are designed to provide spatiotemporal patterns of mechanical input to the skin via an array of contactors, each under individual computer control. Drive mechanisms are based on piezoelectric bimorphs in a cantilever geometry. The first of these is a 25-contactor array (5 × 5 contactors at 2 mm spacing). It is a rugged design with a compact drive system and is capable of producing strong stimuli when running from low voltage supplies. Combined with a PC mouse, it can be used for active exploration tasks. Pilot studies were performed which demonstrated that subjects could successfully use the device for discrimination of line orientation, simple shape identification and line following tasks. A 24-contactor stimulator (6 × 4 contactors at 2 mm spacing) with improved bandwidth was then developed. This features control electronics designed to transmit arbitrary waveforms to each channel (generated on-the-fly, in real time) and software for rapid development of experiments. It is built around a graphics tablet, giving high precision position capability over a large 2D workspace. Experiments using two-component stimuli (components at 40 Hz and 320 Hz) indicate that spectral balance within active stimuli is discriminable independent of overall intensity, and that the spatial variation (texture) within the target is easier to detect at 320 Hz that at 40 Hz. The third system developed (again 6 × 4 contactors at 2 mm spacing) was a lightweight modular stimulator developed for fingertip and thumb grasping tasks; furthermore it was integrated with force-feedback on each digit and a complex graphical display, forming a multi-modal Virtual Reality device for the display of virtual textiles. It is capable of broadband stimulation with real-time generated outputs derived from a physical model of the fabric surface. In an evaluation study, virtual textiles generated from physical measurements of real textiles were ranked in categories reflecting key mechanical and textural properties. The results were compared with a similar study performed on the real fabrics from which the virtual textiles had been derived. There was good agreement between the ratings of the virtual textiles and the real textiles, indicating that the virtual textiles are a good representation of the real textiles and that the system is delivering appropriate cues to the user

The future of textiles sourcing: exploring the potential for digital tools

Textile selection involves aspects of objective function and subjective experience. While technical assessments of textiles are extensively supported by standards and machinery that provide the industry with rigorous specifications, the more subjective characteristics remain heavily reliant on designers’ tacit knowledge, experience and intuition. In this paper, we present a study that investigated designers’ textile sourcing activities and if and how digital tools could provide support. The study was conducted in a textile fair with an expert audience in the mind-set of sourcing. An existing digital tool that allows textiles manipulation was introduced to familiarise participants with the digital context and enable conversations on the future of textiles sourcing. We also look at the implications of adopting digital tools for their activities including a transition to more sustainable practices. The results raise awareness of designers’ use of experiential information to support textiles sourcing, besides highlighting requirements for designing future digital tools

The feasibility of using virtual prototyping technologies for product evaluation

With the continuous development in computer and communications technology the use of computer aided design in design processes is becoming more commonplace. A wide range of virtual prototyping technologies are currently in development, some of which are commercially viable for use within a product design process. These virtual prototyping technologies range from graphics tablets to haptic devices. With the compression of design cycles the feasibility of using these technologies for product evaluation is becoming an ever more important consideration. This thesis begins by presenting the findings of a comprehensive literature review defining product design with a focus on product evaluation and a discussion of current virtual prototyping technologies. From the literature review it was clear that user involvement in the product evaluation process is critical. The literature review was followed by a series of interconnected studies starting with an investigation into design consultancies' access and use of prototyping technologies and their evaluation methods. Although design consultancies are already using photo-realistic renderings, animations and sometimes 3600 view CAD models for their virtual product evaluations, current virtual prototyping hardware and software is often unsatisfactory for their needs. Some emergent technologies such as haptic interfaces are currently not commonly used in industry. This study was followed by an investigation into users' psychological acceptance and physiological discomfort when using a variety of virtual prototyping tools for product evaluation compared with using physical prototypes, ranging from on-screen photo-realistic renderings to 3D 3600 view models developed using a range of design software. The third study then went on to explore the feasibility of using these virtual prototyping tools and the effect on product preference when compared to using physical prototypes. The forth study looked at the designer's requirements for current and future virtual prototyping tools, design tools and evaluation methods. In the final chapters of the thesis the relative strengths and weaknesses of these technologies were re-evaluated and a definitive set of user requirements based on the documentary evidence of the previous studies was produced. This was followed by the development of a speculative series of scenarios for the next generation of virtual prototyping technologies ranging from improvements to existing technologies through to blue sky concepts. These scenarios were then evaluated by designers and consumers to produce documentary evidence and recommendations for preferred and suitable combinations of virtual prototyping technologies. Such hardware and software will require a user interface that is intuitive, simple, easy to use and suitable for both the designers who create the virtual prototypes and the consumers who evaluate them

The Application of Mixed Reality Within Civil Nuclear Manufacturing and Operational Environments

This thesis documents the design and application of Mixed Reality (MR) within a nuclear manufacturing cell through the creation of a Digitally Assisted Assembly Cell (DAAC). The DAAC is a proof of concept system, combining full body tracking within a room sized environment and bi-directional feedback mechanism to allow communication between users within the Virtual Environment (VE) and a manufacturing cell. This allows for training, remote assistance, delivery of work instructions, and data capture within a manufacturing cell. The research underpinning the DAAC encompasses four main areas; the nuclear industry, Virtual Reality (VR) and MR technology, MR within manufacturing, and finally the 4 th Industrial Revolution (IR4.0). Using an array of Kinect sensors, the DAAC was designed to capture user movements within a real manufacturing cell, which can be transferred in real time to a VE, creating a digital twin of the real cell. Users can interact with each other via digital assets and laser pointers projected into the cell, accompanied by a built-in Voice over Internet Protocol (VoIP) system. This allows for the capture of implicit knowledge from operators within the real manufacturing cell, as well as transfer of that knowledge to future operators. Additionally, users can connect to the VE from anywhere in the world. In this way, experts are able to communicate with the users in the real manufacturing cell and assist with their training. The human tracking data fills an identified gap in the IR4.0 network of Cyber Physical System (CPS), and could allow for future optimisations within manufacturing systems, Material Resource Planning (MRP) and Enterprise Resource Planning (ERP). This project is a demonstration of how MR could prove valuable within nuclear manufacture. The DAAC is designed to be low cost. It is hoped this will allow for its use by groups who have traditionally been priced out of MR technology. This could help Small to Medium Enterprises (SMEs) close the double digital divide between themselves and larger global corporations. For larger corporations it offers the benefit of being low cost, and, is consequently, easier to roll out across the value chain. Skills developed in one area can also be transferred to others across the internet, as users from one manufacturing cell can watch and communicate with those in another. However, as a proof of concept, the DAAC is at Technology Readiness Level (TRL) five or six and, prior to its wider application, further testing is required to asses and improve the technology. The work was patented in both the UK (S. R EDDISH et al., 2017a), the US (S. R EDDISH et al., 2017b) and China (S. R EDDISH et al., 2017c). The patents are owned by Rolls-Royce and cover the methods of bi-directional feedback from which users can interact from the digital to the real and vice versa. Stephen Reddish Mixed Mode Realities in Nuclear Manufacturing Key words: Mixed Mode Reality, Virtual Reality, Augmented Reality, Nuclear, Manufacture, Digital Twin, Cyber Physical Syste

Using MapReduce Streaming for Distributed Life Simulation on the Cloud

Distributed software simulations are indispensable in the study of large-scale life models but often require the use of technically complex lower-level distributed computing frameworks, such as MPI. We propose to overcome the complexity challenge by applying the emerging MapReduce (MR) model to distributed life simulations and by running such simulations on the cloud. Technically, we design optimized MR streaming algorithms for discrete and continuous versions of Conway’s life according to a general MR streaming pattern. We chose life because it is simple enough as a testbed for MR’s applicability to a-life simulations and general enough to make our results applicable to various lattice-based a-life models. We implement and empirically evaluate our algorithms’ performance on Amazon’s Elastic MR cloud. Our experiments demonstrate that a single MR optimization technique called strip partitioning can reduce the execution time of continuous life simulations by 64%. To the best of our knowledge, we are the first to propose and evaluate MR streaming algorithms for lattice-based simulations. Our algorithms can serve as prototypes in the development of novel MR simulation algorithms for large-scale lattice-based a-life models.https://digitalcommons.chapman.edu/scs_books/1014/thumbnail.jp