522 research outputs found
Cooperative Symbol-Based Signaling for Networks with Multiple Relays
Wireless channels suffer from severe inherent impairments and hence
reliable and high data rate wireless transmission is particularly challenging to
achieve. Fortunately, using multiple antennae improves performance in wireless
transmission by providing space diversity, spatial multiplexing, and power gains.
However, in wireless ad-hoc networks multiple antennae may not be acceptable
due to limitations in size, cost, and hardware complexity. As a result, cooperative
relaying strategies have attracted considerable attention because of their abilities
to take advantage of multi-antenna by using multiple single-antenna relays.
This study is to explore cooperative signaling for different relay networks,
such as multi-hop relay networks formed by multiple single-antenna relays and
multi-stage relay networks formed by multiple relaying stages with each stage
holding several single-antenna relays. The main contribution of this study is the
development of a new relaying scheme for networks using symbol-level
modulation, such as binary phase shift keying (BPSK) and quadrature phase shift
keying (QPSK). We also analyze effects of this newly developed scheme when it
is used with space-time coding in a multi-stage relay network. Simulation results
demonstrate that the new scheme outperforms previously proposed schemes:
amplify-and-forward (AF) scheme and decode-and-forward (DF) scheme
Forwarding strategies and optimal power allocation for coherent and noncoherent relay networks
In fading wireless channels, relays are used with the aim of achieving diversity and thus overall performance gain. In cooperative relay networks, various forwarding techniques like amplify and forward (AF) and decode and forward (DF) are used at the relay for better throughput and improved BER performance than traditional multihop systems. In a power constrained environment, the performance can be further improved by using an optimal power allocation strategy. The relative position of the relay with respect to the source and destination also has an immense effect on the efficacy of the relay.;We position the relay at various positions in a planar grid, with the position of source and destination being fixed, and we investigate the effect that the positioning of the relay has on a relaying system. We use our three terminal model to optimize the power allocation under total transmit power constraint, to maximize the instantaneous signal-to-noise ratio (SNR) at destination, and thus achieve improved throughput and BER performance, while using AF and DF protocols. We evaluate the performance of our system for both coherent and noncoherent modulation in a Rayleigh block fading channel. Quadrature phase shift keying (QPSK) is used in the coherent case and 4-Frequency shift keying (4-FSK) is used in the noncoherent case.;Previous works involving power allocation schemes have mainly concentrated on optimizing information theoretic quantities like capacity and outage probability. We derive expressions for instantaneous SNR using our model and optimize the power allocation based on that, with the final aim of achieving improved uncoded BER. Analytical expressions of the instantaneous SNR at the destination are derived for both AF and DF. These expressions are numerically optimized to obtain an optimum power allocation strategy for each position of the relay in both the AF and DF schemes using coherent or noncoherent detection.;We compare the performance of the AF and DF protocols based on their positional BER and throughput at different received SNR and notice that our power optimized schemes outperform existing power control schemes at certain areas. Finally we also identify the shape and area of the regions where relaying would provide performance gains for both the protocols at different received SNRs
Cooperative Transmission Techniques in Wireless Communication Networks
Cooperative communication networks have received significant interests from both
academia and industry in the past decade due to its ability to provide spatial diversity
without the need of implementing multiple transmit and/or receive antennas at the
end-user terminals. These new communication networks have inspired novel ideas
and approaches to find out what and how performance improvement can be provided
with cooperative communications. The objective of this thesis is to design and analyze
various cooperative transmission techniques under the two common relaying signal
processing methods, namely decode-and-forward (DF) and amplify-and-forward
(AF).
For the DF method, the thesis focuses on providing performance improvement
by mitigating detection errors at the relay(s). In particular, the relaying action is
implemented adaptively to reduce the phenomenon of error propagation: whether or
not a relay’s decision to retransmit depends on its decision variable and a predefined
threshold. First, under the scenario that unequal error protection is employed to
transmit different information classes at the source, a relaying protocol in a singlerelay
network is proposed and its error performance is evaluated. It is shown that
by setting the optimal signal-to-noise ratio (SNR) thresholds at the relay for different
information classes, the overall error performance can be significantly improved.
Second, for multiple-relay networks, a relay selection protocol, also based on SNR
thresholds, is proposed and the optimal thresholds are also provided. Third, an
adaptive relaying protocol and a low-complexity receiver are proposed when binary
frequency-shift-keying (FSK) modulation is employed and neither the receiver nor the
transmitter knows the fading coefficients. It is demonstrated that large performance
improvements are possible when the optimal thresholds are implemented at the relays
and destination. Finally, under the scenario that there is information feedback
from the destination to the relays, a novel protocol is developed to achieve the maximum
transmission throughput over a multiple-relay network while the bit-error rate
satisfies a given constraint.
With the AF method, the thesis examines a fixed-gain multiple-relay network
in which the channels are temporally-correlated Rayleigh flat fading. Developed is
a general framework for maximum-ratio-combining detection when M-FSK modulation
is used and no channel state information is available at the destination. In
particular, an upper-bound expression on the system’s error performance is derived
and used to verify that the system achieves the maximal diversity order. Simulation
results demonstrate that the proposed scheme outperforms the existing schemes for
the multiple-relay network under consideration
Performance analysis of diversity techniques in wireless communication systems: Cooperative systems with CCI and MIMO-OFDM systems
This Dissertation analyzes the performance of ecient digital commu- nication systems, the performance analysis includes the bit error rate (BER) of dier- ent binary and M-ary modulation schemes, and the average channel capacity (ACC) under dierent adaptive transmission protocols, namely, the simultaneous power and rate adaptation protocol (OPRA), the optimal rate with xed power protocol (ORA), the channel inversion with xed rate protocol (CIFR), and the truncated channel in- version with xed transmit power protocol (CTIFR). In this dissertation, BER and ACC performance of interference-limited dual-hop decode-and-forward (DF) relay- ing cooperative systems with co-channel interference (CCI) at both the relay and destination nodes is analyzed in small-scale multipath Nakagami-m fading channels with arbitrary (integer as well as non-integer) values of m. This channel condition is assumed for both the desired signal as well as co-channel interfering signals. In addition, the practical case of unequal average fading powers between the two hops is assumed in the analysis. The analysis assumes an arbitrary number of indepen- dent and non-identically distributed (i.n.i.d.) interfering signals at both relay (R) and destination (D) nodes. Also, the work extended to the case when the receiver employs the maximum ratio combining (MRC) and the equal gain combining (EGC) schemes to exploit the diversity gain
- …