Extrinsic Parameter Calibration for Line Scanning Cameras on Ground Vehicles with Navigation Systems Using a Calibration Pattern

Line scanning cameras, which capture only a single line of pixels, have been increasingly used in ground based mobile or robotic platforms. In applications where it is advantageous to directly georeference the camera data to world coordinates, an accurate estimate of the camera's 6D pose is required. This paper focuses on the common case where a mobile platform is equipped with a rigidly mounted line scanning camera, whose pose is unknown, and a navigation system providing vehicle body pose estimates. We propose a novel method that estimates the camera's pose relative to the navigation system. The approach involves imaging and manually labelling a calibration pattern with distinctly identifiable points, triangulating these points from camera and navigation system data and reprojecting them in order to compute a likelihood, which is maximised to estimate the 6D camera pose. Additionally, a Markov Chain Monte Carlo (MCMC) algorithm is used to estimate the uncertainty of the offset. Tested on two different platforms, the method was able to estimate the pose to within 0.06 m / 1.05$^{\circ}$ and 0.18 m / 2.39$^{\circ}$. We also propose several approaches to displaying and interpreting the 6D results in a human readable way.Comment: Published in MDPI Sensors, 30 October 201

Calibration of Multi-LIDAR Systems for Real-Time Surface Management: Application in Bucket Wheel Reclaimer

Stockpile reclaiming using a Bucket Wheel Reclaimer (BWR) is an important part of stockyard management. The growth in demand for material handling over the years has drawn attention to improve the automation of the process. However, studies have shown that stockpiled products are being reclaimed at approximately 50% of their potential. This study focuses on the challenges in the automation of stockyard management system using a BWR.For high accuracy point cloud computation and surface reconstruction of the stockpiled materials, accurate calibration is of crucial importance. This dissertation presents a calibration technique for multi-LIDAR systems to estimate the GNSS-LIDAR extrinsic parameters of BWR's. The approach presented works with one or more 2D LIDARs and does not require special markers (e.g., reflective tape) or surveyed locations (other than a DGNSS base station antenna). The method and its accuracy have been demonstrated using experimental data from a stockyard environment.Regarding real-time management and control, the dissertation presents a technique for real-time point cloud management, visualization, and feature extraction for large scale stockyards environments. The software solution described continuously manages the point cloud in real-time as the sensors stream data. It also displays the current stockpile on an interactive interface that allows the user to see the surface from different view-points, interrogate the coordinates of any surface location, and computes the BWR entry and exit point for automated operation. The software is tested using experimental data from a port located in Yantai, China

Lidar-based Obstacle Detection and Recognition for Autonomous Agricultural Vehicles

Today, agricultural vehicles are available that can drive autonomously and follow exact route plans more precisely than human operators. Combined with advancements in precision agriculture, autonomous agricultural robots can reduce manual labor, improve workflow, and optimize yield. However, as of today, human operators are still required for monitoring the environment and acting upon potential obstacles in front of the vehicle. To eliminate this need, safety must be ensured by accurate and reliable obstacle detection and avoidance systems.In this thesis, lidar-based obstacle detection and recognition in agricultural environments has been investigated. A rotating multi-beam lidar generating 3D point clouds was used for point-wise classification of agricultural scenes, while multi-modal fusion with cameras and radar was used to increase performance and robustness. Two research perception platforms were presented and used for data acquisition. The proposed methods were all evaluated on recorded datasets that represented a wide range of realistic agricultural environments and included both static and dynamic obstacles.For 3D point cloud classification, two methods were proposed for handling density variations during feature extraction. One method outperformed a frequently used generic 3D feature descriptor, whereas the other method showed promising preliminary results using deep learning on 2D range images. For multi-modal fusion, four methods were proposed for combining lidar with color camera, thermal camera, and radar. Gradual improvements in classification accuracy were seen, as spatial, temporal, and multi-modal relationships were introduced in the models. Finally, occupancy grid mapping was used to fuse and map detections globally, and runtime obstacle detection was applied on mapped detections along the vehicle path, thus simulating an actual traversal.The proposed methods serve as a first step towards full autonomy for agricultural vehicles. The study has thus shown that recent advancements in autonomous driving can be transferred to the agricultural domain, when accurate distinctions are made between obstacles and processable vegetation. Future research in the domain has further been facilitated with the release of the multi-modal obstacle dataset, FieldSAFE

Error modeling and calibration of exteroceptive sensors for accurate mapping applications

Reliable robotic perception and planning are critical to performing autonomous actions in uncertain, unstructured environments. In field robotic systems, automation is achieved by interpreting exteroceptive sensor information to infer something about the world. This is then mapped to provide a consistent spatial context, so that actions can be planned around the predicted future interaction of the robot and the world. The whole system is as reliable as the weakest link in this chain. In this paper, the term mapping is used broadly to describe the transformation of range-based exteroceptive sensor data (such as LIDAR or stereo vision) to a fixed navigation frame, so that it can be used to form an internal representation of the environment. The coordinate transformation from the sensor frame to the navigation frame is analyzed to produce a spatial error model that captures the dominant geometric and temporal sources of mapping error. This allows the mapping accuracy to be calculated at run time. A generic extrinsic calibration method for exteroceptive range-based sensors is then presented to determine the sensor location and orientation. This allows systematic errors in individual sensors to be minimized, and when multiple sensors are used, it minimizes the systematic contradiction between them to enable reliable multisensor data fusion. The mathematical derivations at the core of this model are not particularly novel or complicated, but the rigorous analysis and application to field robotics seems to be largely absent from the literature to date. The techniques in this paper are simple to implement, and they offer a significant improvement to the accuracy, precision, and integrity of mapped information. Consequently, they should be employed whenever maps are formed from range-based exteroceptive sensor data. © 2009 Wiley Periodicals, Inc.\u

Resilient Perception for Outdoor Unmanned Ground Vehicles

This thesis promotes the development of resilience for perception systems with a focus on Unmanned Ground Vehicles (UGVs) in adverse environmental conditions. Perception is the interpretation of sensor data to produce a representation of the environment that is necessary for subsequent decision making. Long-term autonomy requires perception systems that correctly function in unusual but realistic conditions that will eventually occur during extended missions. State-of-the-art UGV systems can fail when the sensor data are beyond the operational capacity of the perception models. The key to resilient perception system lies in the use of multiple sensor modalities and the pre-selection of appropriate sensor data to minimise the chance of failure. This thesis proposes a framework based on diagnostic principles to evaluate and preselect sensor data prior to interpretation by the perception system. Image-based quality metrics are explored and evaluated experimentally using infrared (IR) and visual cameras onboard a UGV in the presence of smoke and airborne dust. A novel quality metric, Spatial Entropy (SE), is introduced and evaluated. The proposed framework is applied to a state-of-the-art Visual-SLAM algorithm combining visual and IR imaging as a real-world example. An extensive experimental evaluation demonstrates that the framework allows for camera-based localisation that is resilient to a range of low-visibility conditions when compared to other methods that use a single sensor or combine sensor data without selection. The proposed framework allows for a resilient localisation in adverse conditions using image data but also has significant potential to benefit many perception applications. Employing multiple sensing modalities along with pre-selection of appropriate data is a powerful method to create resilient perception systems by anticipating and mitigating errors. The development of such resilient perception systems is a requirement for next-generation outdoor UGVs

Multi-target tracking using appearance models for identity maintenance

This thesis considers perception systems for urban environments. It focuses on the task of tracking dynamic objects and in particular on methods that can maintain the identities of targets through periods of ambiguity. Examples of such ambiguous situations occur when targets interact with each other, or when they are occluded by other objects or the environment. With the development of self driving cars, the push for autonomous delivery of packages, and an increasing use of technology for security, surveillance and public-safety applications, robust perception in crowded urban spaces is more important than ever before. A critical part of perception systems is the ability to understand the motion of objects in a scene. Tracking strategies that merge closely-spaced targets together into groups have been shown to offer improved robustness, but in doing so sacrifice the concept of target identity. Additionally, the primary sensor used for the tracking task may not provide the information required to reason about the identity of individual objects. There are three primary contributions in this work. The first is the development of 3D lidar tracking methods with improved ability to track closely-spaced targets and that can determine when target identities have become ambiguous. Secondly, this thesis defines appearance models suitable for the task of determining the identities of previously-observed targets, which may include the use of data from additional sensing modalities. The final contribution of this work is the combination of lidar tracking and appearance modelling, to enable the clarification of target identities in the presence of ambiguities caused by scene complexity. The algorithms presented in this work are validated on both carefully controlled and unconstrained datasets. The experiments show that in complex dynamic scenes with interacting targets, the proposed methods achieve significant improvements in tracking performance