3D video coding and transmission

The capture, transmission, and display of 3D content has gained a lot of attention in the last few years. 3D multimedia content is no longer con fined to cinema theatres but is being transmitted using stereoscopic video over satellite, shared on Blu-RayTMdisks, or sent over Internet technologies. Stereoscopic displays are needed at the receiving end and the viewer needs to wear special glasses to present the two versions of the video to the human vision system that then generates the 3D illusion. To be more e ffective and improve the immersive experience, more views are acquired from a larger number of cameras and presented on di fferent displays, such as autostereoscopic and light field displays. These multiple views, combined with depth data, also allow enhanced user experiences and new forms of interaction with the 3D content from virtual viewpoints. This type of audiovisual information is represented by a huge amount of data that needs to be compressed and transmitted over bandwidth-limited channels. Part of the COST Action IC1105 \3D Content Creation, Coding and Transmission over Future Media Networks" (3DConTourNet) focuses on this research challenge.peer-reviewe

Packet loss visibility across SD, HD, 3D, and UHD video streams

The trend towards video streaming with increased spatial resolutions and dimensions, SD, HD, 3D, and 4kUHD, even for portable devices has important implications for displayed video quality. There is an interplay between packetization, packet loss visibility, choice of codec, and viewing conditions, which implies that prior studies at lower resolutions may not be as relevant. This paper presents two sets of experiments, the one at a Variable BitRate (VBR) and the other at a Constant BitRate (CBR), which highlight different aspects of the interpretation. The latter experiments also compare and contrast encoding with either an H.264 or an High Efficiency Video Coding (HEVC) codec, with all results recorded as objective Mean Opinion Score (MOS). The video quality assessments will be of interest to those considering: the bitrates and expected quality in error-prone environments; or, in fact, whether to use a reliable transport protocol to prevent all errors, at a cost in jitter and latency, rather than tolerate low levels of packet errors

Loss-resilient Coding of Texture and Depth for Free-viewpoint Video Conferencing

Free-viewpoint video conferencing allows a participant to observe the remote 3D scene from any freely chosen viewpoint. An intermediate virtual viewpoint image is commonly synthesized using two pairs of transmitted texture and depth maps from two neighboring captured viewpoints via depth-image-based rendering (DIBR). To maintain high quality of synthesized images, it is imperative to contain the adverse effects of network packet losses that may arise during texture and depth video transmission. Towards this end, we develop an integrated approach that exploits the representation redundancy inherent in the multiple streamed videos a voxel in the 3D scene visible to two captured views is sampled and coded twice in the two views. In particular, at the receiver we first develop an error concealment strategy that adaptively blends corresponding pixels in the two captured views during DIBR, so that pixels from the more reliable transmitted view are weighted more heavily. We then couple it with a sender-side optimization of reference picture selection (RPS) during real-time video coding, so that blocks containing samples of voxels that are visible in both views are more error-resiliently coded in one view only, given adaptive blending will erase errors in the other view. Further, synthesized view distortion sensitivities to texture versus depth errors are analyzed, so that relative importance of texture and depth code blocks can be computed for system-wide RPS optimization. Experimental results show that the proposed scheme can outperform the use of a traditional feedback channel by up to 0.82 dB on average at 8% packet loss rate, and by as much as 3 dB for particular frames

QoE Enhancement for Stereoscopic 3DVideo Quality Based on Depth and Color Transmission over IP Networks: A Review

In this review paper we focus on the enhancement of Quality of Experience (QoE) for stereoscopic 3D video based on depth information. We focus on stereoscopic video format because it takes less bandwidth than other format when 3D video is transmitted over an error channel but it is easily affected by the network parameters such as packets loss, delay and jitter. The packet loss on 3D video has more impact in the depth information than other 3D video factors such as comfort, motion, disparity and discomfort. The packet loss on depth information causes undesired effect on color and depth maps. Therefore, in order to minimize quality degradation, the application of frame loss concealment technique is preferred. This technique is expected to improve the QoE for end users. In this paper we will also review 3D video factors and their challenges, methods of measuring the QOE, algorithms used for packets loss recovery.

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

Joint Source-Channel Coding and Unequal Error Protection for Video Plus Depth

Abstract-We consider the joint source-channel coding (JSCC) problem of 3-D stereo video transmission in video plus depth format over noisy channels. Full resolution and downsampled depth maps are considered. The proposed JSCC scheme yields the optimum color and depth quantization parameters as well as the optimum forward error correction code rates used for unequal error protection (UEP) at the packet level. Different coding scenarios are compared and the UEP gain over equal error protection is quantified for flat Rayleigh fading channels. Index Terms-3-D video, joint source-channel coding, unequal error protection, video plus depth

Low Complexity Multiview Video Coding

3D video is a technology that has seen a tremendous attention in the recent years. Multiview Video Coding (MVC) is an extension of the popular H.264 video coding standard and is commonly used to compress 3D videos. It offers an improvement of 20% to 50% in compression efficiency over simulcast encoding of multiview videos using the conventional H.264 video coding standard. However, there are two important problems associated with it: (i) its superior compression performance comes at the cost of significantly higher computational complexity which hampers the real-world realization of MVC encoder in applications such as 3D live broadcasting and interactive Free Viewpoint Television (FTV), and (ii) compressed 3D videos can suffer from packet loss during transmission, which can degrade the viewing quality of the 3D video at the decoder. This thesis aims to solve these problems by presenting techniques to reduce the computational complexity of the MVC encoder and by proposing a consistent error concealment technique for frame losses in 3D video transmission. The thesis first analyses the complexity of the MVC encoder. It then proposes two novel techniques to reduce the complexity of motion and disparity estimation. The first method achieves complexity reduction in the disparity estimation process by exploiting the relationship between temporal levels, type of macroblocks and search ranges while the second method achieves it by exploiting the geometrical relation- ship between motion and disparity vectors in stereo frames. These two methods are then combined with other state-of-the-art methods in a unique framework where gains add up. Experimental results show that the proposed low-complexity framework can reduce the encoding time of the standard MVC encoder by over 93% while maintaining similar compression efficiency performance. The addition of new View Synthesis Prediction (VSP) modes to the MVC encoding framework improves the compression efficiency of MVC. However, testing additional modes comes at the cost of increased encoding complexity. In order to reduce the encoding complexity, the thesis, next, proposes a bayesian early mode decision technique for a VSP enhanced MVC coder. It exploits the statistical similarities between the RD costs of the VSP SKIP mode in neighbouring views to terminate the mode decision process early. Results indicate that the proposed technique can reduce the encoding time of the enhanced MVC coder by over 33% at similar compression efficiency levels. Finally, compressed 3D videos are usually required to be broadcast to a large number of users where transmission errors can lead to frame losses which can degrade the video quality at the decoder. A simple reconstruction of the lost frames can lead to inconsistent reconstruction of the 3D scene which may negatively affect the viewing experience of a user. In order to solve this problem, the thesis proposes, at the end, a consistency model for recovering frames lost during transmission. The proposed consistency model is used to evaluate inter-view and temporal consistencies while selecting candidate blocks for concealment. Experimental results show that the proposed technique is able to recover the lost frames with high consistency and better quality than two standard error concealment methods and a baseline technique based on the boundary matching algorithm