1,932 research outputs found
Design and Implement Towards Enhanced Physical Interactive Performance Robot Bodies
In this thesis, it will introduce the design principle and implement details towards enhanced physical interactive performance robot bodies, which are more specically
focused on under actuated principle robotic hands and articulated leg robots. Since they both signicantly function as the physical interactive robot bodies against external environment, while their current performance can hardly satisfy the requirement of undertaking missions in real application.
Regarding to the enhanced physical interactive performances, my work will emphasis on the three following specific functionalities, high energy efficiency, high
strength and physical sturdiness in both robotics actuation and mechanism. For achieving the aforementioned targets, multiple design methods have been applied,
rstly the elastic energy storage elements and compliant actuation have been adopted in legged robots as Asymmetrical Compliant Actuation (ACA), implemented for not
only single joint but also multiple joints as mono and biarticulation congurations in order to achieve higher energy effciency motion. Secondly the under actuated
principle and modular nger design concept have been utilized on the development of robotic hands for enhancing the grasping strength and physical sturdiness meanwhile maintaining the manipulation dexterity. Lastly, a novel high payload active tuning Parallel Elastic Actuation (PEA) and Series Elastic Actuation (SEA) have been
adopted on legged robots for augmenting energy eciency and physical sturdiness.
My thesis contribution relies on the novel design and implement of robotics bodies for enhancing physical interactive performance and we experimentally veried the
design effectiveness in specic designed scenario and practical applications
Force control of lightweight series elastic systems using enhanced disturbance observers
This paper analyzes the control challenges associated to lightweight series elastic systems in force control applications, showing that a low end-point inertia can lead to high sensitivity to environment uncertainties. Where mainstream force control methods fail, this paper proposes a control methodology to enhance the performance robustness of existing disturbance observers (DOBs). The approach is validated experimentally and successfully compared to basic control solutions and state of the art DOB approaches
Evaluation and Comparison of SEA Torque Controllers in a Unified Framework
Series elastic actuators (SEA) with their inherent compliance offer a safe
torque source for robots that are interacting with various environments,
including humans. These applications have high requirements for the SEA torque
controllers, both in the torque response as well as interaction behavior with
its the environment. To differentiate state of the art torque controllers, this
work is introducing a unifying theoretical and experimental framework that
compares controllers based on their torque transfer behavior, their apparent
impedance behavior, and especially the passivity of the apparent impedance,
i.e. their interaction stability, as well as their sensitivity to sensor noise.
We compare classical SEA control approaches such as cascaded PID controllers
and full state feedback controllers with advanced controllers using disturbance
observers, acceleration feedback and adaptation rules. Simulations and
experiments demonstrate the trade-off between stable interactions, high
bandwidths and low noise levels. Based on these tradeoffs, an application
specific controller can be designed and tuned, based on desired interaction
with the respective environment
Control and structural optimization for maneuvering large spacecraft
Presented here are the results of an advanced control design as well as a discussion of the requirements for automating both the structures and control design efforts for maneuvering a large spacecraft. The advanced control application addresses a general three dimensional slewing problem, and is applied to a large geostationary platform. The platform consists of two flexible antennas attached to the ends of a flexible truss. The control strategy involves an open-loop rigid body control profile which is derived from a nonlinear optimal control problem and provides the main control effort. A perturbation feedback control reduces the response due to the flexibility of the structure. Results are shown which demonstrate the usefulness of the approach. Software issues are considered for developing an integrated structures and control design environment
The programmable spring: towards physical emulators of mechanical systems
The way motion is generated and controlled in robotics has traditionally been based on a philosophy of rigidity, where movements are tightly controlled and external influences are
ironed out. More recent research into autonomous robots, biological actuation and human machine interaction has uncovered the value of compliant mechanisms in both aiding the production of effective, adaptive and efficient behaviour, and increasing the margins for safety in machines that operate alongside people. Various actuation methods have previously been proposed that allow robotic systems to exploit rather than avoid the influences of external perturbations, but many of these devices can be complex and costly to engineer, and are often task specific.
This thesis documents the development of a general purpose modular actuator that can emulate the behaviour of various spring damping systems. It builds on some of the work done to produce reliable force controlled electronic actuators by developing a low cost implementation of an existing force actuator, and combining it with a novel high level control structure running in software on an embedded microcontroller. The actuator hardware with its embedded software results in a compact modular device capable of approximating the behaviour of various mechanical systems and actuation devices. Specifying these behaviours is achieved with an intuitive user interface and a control system based on a concept called profile groups. Profile group configurations that specify complex mechanical behaviours can be rapidly designed and the resulting configurations downloaded for a device to emulate.
The novel control system and intuitive user interface developed to facilitate the rapid prototyping of mechanical behaviours are explained in detail. Two prototype devices are demonstrated emulating a number of mechanical systems and the results are compared to mechanical counterparts. Performance issues are discussed and some solutions proposed alongside general improvements to the control system. The applications beyond robotics are also explored
- …