Enhanced PON Infrastructure Enabled by Silicon Photonics

Les systèmes de courte portée et de détection directe sont le dernier/premier kilomètre de la fourniture des services Internet d'aujourd'hui. Deux cas d'application sont abordés dans cette thèse, l'un concerne l'amélioration des performances des services Internet par la Fibre-To-TheHome ou les réseaux optiques passifs (PONs). L'autre est le radio access network (RAN) pour le fronthaul. Notre objectif pour RAN est de superposer les signaux 5G sur une infrastructure PON. Nous démontrons expérimentalement la génération d'un signal de répartition multiplexée de fréquences orthogonales (OFDM) à bande latérale unique en utilisant un modulateur IQ sur puce basé sur les photoniques au silicium à micro-anneau. Il s'agit d'une solution à coût bas permettant aux PONs d'augmenter les débits de données grâce à l'utilisation d'OFDM. Nous avons généré un signal OFDM à large bande avec un ratio de suppression de bande latérale de plus de 18 dB. Afin de confirmer la robustesse de la dispersion chromatique (CD), nous transmettons le signal généré OFDM SSB dans plus de 20 km de fibre de monomode standard. Aucun fading induit par la CD n'a été observé et le taux d'erreur sur les bits était bon. Nous proposons une solution de photoniques au silicium pour un réseau optique passif afin de mitiger l'interférence de battement signal-signal (SSBI) dans la transmission OFDM, et de récupérer une partie des porteuses de la liaison descendante pour une utilisation dans la liaison montante. Le sous-système recrée les interférences à une entrée du détecteur équilibré ; le signal de données corrompu par SSBI est à la deuxième entrée. L'annulation se produit via la soustraction dans la détection équilibrée. Comme notre solution de photoniques au silicium (SiP) ne peut pas filtrer les signaux idéalement, nous examinons un facteur d'échelle introduit dans la détection équilibrée qui peut balancer les effets de filtrage non idéaux. Nous montrons expérimentalement l'annulation de l'interférence donne de bonnes performances même avec une porteuse faible, soit pour un ratio porteuse/signal ultra bas de 0 dB. Bien que notre solution soit sensible aux effets de la température, notre démonstration expérimentale montre que le réglage de la fréquence résonante peut dériver jusqu'à 12 GHz de la valeur ciblée et présenter toujours de bonnes performances. Nous effectuons des simulations extensives du schéma d'annulation SSBI proposé, et suggérons une diverse conception polarisée pour le sous-système SiP. Nous examinons via la simulation la vulnérabilité à la variation de température et introduisons une nouvelle métrique de performance : Q-facteur minimum garanti. Nous nous servons de cette métrique pour évaluer la robustesse d'annulation SSBI contre la dérive de fréquence induite par les changements de température. Nous maximisons l'efficacité spectrale sous différentes conditions du système en balayant les paramètres de conception contrôlables. Finalement, les résultats de la simulation du système fournissent des indications sur la conception du résonateur micro-anneau, ainsi que sur le choix de la bande de garde et du format de modulation pour obtenir la plus grande efficacité spectrale. Finalement, nous nous concentrons sur la superposition des signaux 5G sur une infrastructure PON pour RAN. Nous expérimentalement validons un sous-système photonique au silicium conçu pour les réseaux optiques passifs avec réutilisation de porteuses et compatibilité radiosur-fibre (RoF) analogique 5G. Le sous-système permet la détection simultanée des signaux RoF et du signal PON transmis dans une seule tranche assignée de longueur d'onde. Tout en maintenant une qualité suffisante de détection des signaux RoF et PON, il n'y a que la puissance minimale de la porteuse qui est extraite pour chaque détection, ce qui conserve ainsi la puissance de la porteuse pour la modulation de liaison montante. Nous réalisons une suppression efficace du signal de liaison descendante en laissant une porteuse propre et forte pour la remodulation. Nous démontrons expérimentalement le signal RoF de liaison montante via un modulateur à micro-anneau. Nous avons détecté avec succès un signal à large bande de 8 GHz et cinq signaux RoF de 125 MHz simultanément. Et deux signaux RoF de 125 MHz sont remodulés sur la même porteuse. Le signal RoF de liaison montante généré est de 13 dB de plus que les signaux de liaison descendante, ce qui indique leur robustesse contre la diaphonie des signaux résiduels de la liaison descendante.Short reach, direct detection systems are the last/first mile of today's internet service provision. Two use cases are addressed in this thesis, one is for enhancing performance of Internet services on fiber-to-the-home or passive optical networks (PON). The other is radio access networks (RAN) for fronthaul. Our focus for RAN is to overlay 5G signals on a PON infrastructure. We experimentally demonstrate the generation of a single-sideband orthogonal frequency division multiplexed (OFDM) signal using an on-chip silicon photonics microring-based IQ modulator. This is a low cost solution enabling PONs to increase data rates through the use of OFDM. We generated a wideband OFDM signal with over 18 dB sideband suppression ratio. To confirm chromatic dispersion (CD) robustness, we transmit the generated SSB OFDM signal over 20 km of standard single mode fiber. No CD-induced fading was observed and bit error rate was good. We propose a silicon photonics solution for a passive optical network to mitigate signal-signal beat interference (SSBI) in OFDM transmission, and to recuperate a part of the downlink carrier for use in the uplink. The subsystem recreates the interference at one balanced detector input; the data signal corrupted with SSBI is at the second input. Cancellation occurs via subtraction in the balanced detection. As our silicon photonics (SiP) solution cannot filter the signals ideally, we examine a scaling factor to be introduced to the balanced detection that can trade-off the non-ideal filtering effects. We show experimentally that the interference is cancelled, allowing good performance even with a weak carrier, that is, for ultra low carrier to signal ratio of 0 dB. Although our solution is sensitive to temperature effects, our experimental demonstration shows the tuning of the resonant frequency can drift by as much as 12 GHz from the targeted value and still provide good performance. We perform extensive simulations of the proposed SSBI cancellation scheme, and suggest a polarization diverse design for the SiP subsystem. We examine via simulation the vulnerability to temperature variation and introduce a new performance metric: minimum guaranteed Qfactor. We use this metric to evaluate the SSBI cancellation robustness against the frequency drift induced by temperature changes. We maximize the spectral efficiency under different system conditions by sweeping the controllable design parameters. Finally the system simulation results provide guidance on the microring resonator design, as well as choice of guard band and modulation format to achieve the highest spectral efficiency. Finally, we turn to focus on overlay 5G signals on a PON infrastructure for RAN. We experimentally validate a silicon photonic subsystem designed for passive optical networks with carrier reuse and 5G analog radio-over-fiber (RoF) compatibility. The subsystem enables the simultaneous detection of RoF signals and a PON signal transmitted in a single assigned wavelength slot. While maintaining sufficient quality of RoF and PON signal detection, only the minimum carrier power is leached off for each detection, thus conserving carrier power for uplink modulation. We realize effective downlink signal suppression to leave a clean and strong carrier for remodulation. We demonstrate experimentally the RoF uplink signal via a micro ring modulator. We successfully detected an 8 GHz broadband signal and five 125 MHz RoF signals simultaneously. And two 125 MHz radio over fiber signals are remodulated onto the same carrier. The generated uplink RoF signal is 13 dB over the downlink signals, indicating their robustness against the crosstalk from residual downlink signals

Cost-Effective Spectrally-Efficient Optical Transceiver Architectures for Metropolitan and Regional Links

The work presented herein explores cost-effective optical transceiver architectures for access, metropolitan and regional links. The primary requirement in such links is cost-effectiveness and secondly, spectral efficiency. The bandwidth/data demand is driven by data-intensive Internet applications, such as cloud-based services and video-on-demand, and is rapidly increasing in access and metro links. Therefore, cost-effective optical transceiver architectures offering high information spectral densities (ISDs > 1(b/s)/Hz) need to be implemented over metropolitan distances. Then, a key question for each link length and application is whether coherent- or direct (non-coherent) detection technology offers the best cost and performance trade-off. The performance and complexity limits of both technologies have been studied. Single polarization direct detection transceivers have been reviewed, focusing on their achievable ISDs and reach. It is concluded that subcarrier modulation (SCM) technique combined with single sideband (SSB) and high-order quadrature amplitude modulation (QAM) signaling, enabled by digital signal processing (DSP) based optical transceivers, must be implemented in order to exceed an ISD of 1 (b/s)/Hz in direct-detection links. The complexity can be shifted from the optical to the electrical domain using such transceivers, and hence, the cost can be minimized. In this regard, a detailed performance comparison of two spectrally-efficient direct detection SCM techniques, namely Nyquist-SCM and OFDM, is presented by means of simulations. It is found out that Nyquist-SCM format offers the transmission distances more than double that of OFDM due to its higher resilience to signal-signal beating interference. Following this, dispersion-precompensated SSB 4- and 16-QAM Nyquist-SCM signal formats were experimentally demonstrated using in-phase and quadrature (IQ)-modulators at net optical ISDs of 1.2 and 2 (b/s)/Hz over 800 km and 323 km of standard single-mode fibre (SSMF), respectively. These demonstrations represent record net optical ISDs over such distances among the reported single polarization wavelength division multiplexed (WDM) systems. Furthermore, since the cost-effectiveness is crucial, the optical complexity of Nyquist-SCM transmitters can be significantly reduced by using low-cost modulators and high-linewidth lasers. A comprehensive theoretical study on SSB signal generation using IQ- and dual-drive Mach-Zehnder modulators (DD-MZMs) was carried out to assess their performance for WDM direct detection links. This was followed by an experimental demonstration of WDM transmission over 242 km of SSMF with a net optical ISD of 1.5 (b/s)/Hz, the highest achieved ISD using a DD-MZM-based transmitter. Following the assessment of direct detection technology using various transmitter designs, cost-effective simplified coherent receiver architectures for access and metro networks have been investigated. The optical complexity of the conventional (polarization- and phase-diverse) coherent receiver is significantly simplified, i.e., consisting of a single 3 dB coupler and balanced photodetector, utilizing heterodyne reception and Alamouti polarization-time block coding. Although the achievable net optical ISD is halved compared to a conventional coherent receiver due to Alamouti coding, its receiver sensitivity provides significant gain over a direct detection receiver at M-ary QAM formats where M ≥16

Next generation passive optical networks based on orthogonal frequency division multiplexing techniques

In recent decades, the industry of communications has acquired huge significance, and nowadays constitutes an essential tool for the society information. Thus, the exponential growth in demand of broadband services and the increasing amount of information to be transmitted have spurred the evolution of the access network infrastructure to effectively meet the user needs in an effective way in terms of costs of both installation and maintenance. Passive optical networks (PON) are currently considered the most efficient and least costly alternative to deploy fiber to the home environment. In order to allow many users simultaneously coexist PONs based on time multiplexing (TDMA) have been developed. Looking ahead, however, it is expected that these techniques do not meet the requirements on access networks. In consequence, other multiple access techniques such as Wavelength Division Multiplexing Access (WDMA) or Orthogonal Frequency Division Multiplexing Access (OFDMA) are currently under study and development for use in the next generation of PONs. Particularly, in recent years OFDM has stood out among the scientific community to be considered a solution with great potential on future implementation of PONs. This is especially true due to the capacity of OFDM to work with multilevel modulations, its high tolerance to chromatic dispersion, and its high flexibility and granularity in terms of bandwidth management. Given the above, the aim of this Thesis is to study deeply the advantages and challenges of implementing the standard OFDM as an access network solution; likewise, it offers solutions to improve its performance. In order to evaluate the main structures and strategies for OFDM-based PON, a comparative analysis of all of them is performed firstly, highlighting their sensitivity levels, maximum range and number of users. A key aspect for network providers is the cost of operation, deployment and maintenance of networks. As a low-cost solution, this Thesis proposes a network model called Statistical-OFDMA-PON based on intensity modulation and direct detection. In addition, dynamic bandwidth management strategies are applied into this model getting an improvement in the power balance which in turn, allows to increase the maximum range and the scalability in number of users. One of the main OFDM problems is the Peak-to-Average Power Ratio (PAPR) which increases with the number of carriers. This thesis proposes a new algorithm based on folding the signal and transmitting auxiliary information in order to compensate the PAPR effect and thus increase the sensitivity of the optical system. On the other hand, OFDMA requires a large number of operations in the digital domain resulting in a high computational effort, which in turn results in an increased cost. For this reason, this Thesis presents a study on the optimization of the required resolution in the Digital-to-Analog / Analog-to-Digital Converters (DAC/ADCs) maintaining the transmission quality. The optimization of the computation time may make the OFDMA-based optical network more attractive for future PONs. Finally, another problem concerning the OFDM optical networks is their sensitivity to Phase Noise (PN). In this regard, this Thesis presents a study of the effect of the laser linewidth and its dependence on signal bandwidth. A mitigation technique based on pilot tones is implemented and the limiting values for the laser linewidth are found to be within the reach of present low-cost light sources.En estas últimas décadas, la industria de las comunicaciones ha adquirido gran importancia y hoy en día, constituye una herramienta imprescindible para el funcionamiento en la sociedad de la información. Así pues, el crecimiento exponencial en la demanda de servicios de banda ancha y la carga de información cada vez mayor que se necesita transmitir ha estimulado la evolución de las infraestructuras del tramo de acceso a la red para poder satisfacer las necesidades del usuario de forma efectiva en términos de costes de instalación y de mantenimiento. Las redes ópticas pasivas (Passive Optical Networks, PON) son actualmente consideradas la alternativa más eficiente y de menor coste para desplegar fibra hasta los hogares. Con el fin de permitir que muchos usuarios coexistan simultáneamente se han desarrollado PONs basadas en multiplexación en tiempo (Time Division Multiplexing Access, TDMA). De cara al futuro, sin embargo, se prevé que estas técnicas no permitan cubrir las exigencias sobre las redes de acceso. En consecuencia, otras técnicas de acceso múltiple al medio como el acceso múltiple por división de longitud de onda (Wavelength Division Multiplexing Access, WDMA) o el acceso múltiple por división de frecuencia ortogonal (Orthogonal Frequency Division Multiplexing Access, OFDMA) se encuentran actualmente en proceso de estudio y desarrollo para su uso en la futura generación de PONs. En concreto, en los últimos años OFDM se ha destacado entre la comunidad científica al considerarse una solución con gran potencial para su futura implantación en redes de acceso pasivas. Esto es especialmente cierto debido a la capacidad que el OFDM para trabajar con modulaciones multinivel, así como su alta tolerancia a la dispersión cromática y a la gran flexibilidad y granularidad que posibilita en términos de gestión del ancho de banda. Por todo lo anterior, el objetivo de esta Tesis es estudiar con profundidad las ventajas y los retos de aplicar el estándar OFDM como solución de red de acceso; del mismo modo, ofrece soluciones para mejorar su rendimiento. Con el objetivo de evaluar las principales estructuras basadas en OFDM-PON, en primer lugar se realiza un análisis comparativo de todas ellas destacando sus niveles de sensibilidad, máximo alcance y número de usuarios. Un aspecto fundamental para los proveedores de red es el coste de operación, despliegue y mantenimiento de las redes. Como solución de bajo coste, esta Tesis propone un modelo de red llamado Statistical-OFDMA-PON que se basa en modulación de intensidad y detección directa. Además, este modelo se completa con estrategias de gestión dinámica del ancho de banda de los usuarios que conforman la estructura de red propuesta consiguiendo una mejora en el balance de potencias que permite aumentar distancia y número de usuarios. Uno de los principales problemas del OFDM es el alto nivel de la relación de potencia de pico a potencia media (Peak-to-Average Power Ratio, PAPR) creciente con el número de portadoras. Esta Tesis propone un nuevo algoritmo basado en el pliegue de la señal y la transmisión de información auxiliar para compensar el efecto del PAPR aumentando así la sensibilidad del sistema óptico. Por otro lado, OFDMA requiere un número elevado de operaciones en el dominio digital resultando en un alto esfuerzo computacional que a su vez se traduce en un aumento del coste. Por esta razón, esta Tesis presenta un estudio sobre la optimización de la resolución requerida en los conversores analógicodigital (Digital-to-Analog/Analog-to-Digital Converters, DAC/ADCs) manteniendo la calidad de transmisión. La optimización del tiempo de cómputo requerido puede dotar de un mayor atractivo la solución de red óptica basada en OFDMA. Finalmente, otro de los problemas que presentan las redes ópticas OFDM es su sensibilidad frente al ruido de fase (Phase Noise, PN). En este aspecto, esta Tesis presenta un estudio del efecto del ancho de línea del láser y su dependencia con el ancho de banda de la señal. Técnicas de mitigación basadas en tonos piloto han sido implementadas y se han encontrado los valores limitantes del ancho de línea dentro del alcance de los láseres de bajo coste

Optimizing total cost of ownership (TCO) for 5G multi-tenant mobile backhaul (MBH) optical transport networks

Legacy network elements are reaching end-of-life and packet-based transport networks are not efficiently optimized. In particular, high density cell architecture in future 5G networks will face big technical and financial challenges due to avalanche of traffic volume and massive growth in connected devices. Raising density and ever-increasing traffic demand within future 5G Heterogeneous Networks (HetNets) will result in huge deployment, expansion and operating costs for upcoming Mobile BackHaul (MBH) networks with flat revenue generation. Thus, the goal of this dissertation is to provide an efficient physical network planning mechanism and an optimized resource engineering tool in order to reduce the Total Cost of Ownership (TCO) and increase the generated revenues. This will help Service Providers (SPs) and Mobile Network Operators (MNOs) to improve their network scalability and maintain positive Project Profit Margins (PPM). In order to meet this goal, three key issues are required to be addressed in our framework and are summarized as follows: i) how to design and migrate to a scalable and reliable MBH network in an optimal cost?, ii) how to control the deployment and activation of the network resources in such MBH based on required traffic demand in an efficient and cost-effective way?, and iii) how to enhance the resource sharing in such network and maximize the profit margins in an efficient way? As part of our contributions to address the first issue highlighted above and to plan the MBH with reduced network TCO and improved scalability, we propose a comprehensive migration plan towards an End-to-End Integrated-Optical-Packet-Network (E2-IOPN) for SP optical transport networks. We review various empirical challenges faced by a real SP during the transformation process towards E2-IOPN as well as the implementation of an as-built plan and a high-level design (HLD) for migrating towards lower cost-per-bit GPON, MPLS-TP, OTN and next-generation DWDM technologies. Then, we propose a longer-term strategy based on SDN and NFV approach that will offer rapid end-to-end service provisioning with costefficient centralized network control. We define CapEx and OpEx cost models and drive a cost comparative study that shows the benefit and financial impact of introducing new low-cost packet-based technologies to carry traffic from legacy and new services. To address the second issue, we first introduce an algorithm based on a stochastic geometry model (Voronoi Tessellation) to more precisely define MBH zones within a geographical area and more accurately calculate required traffic demands and related MBH infrastructure. In order to optimize the deployment and activation of the network resources in the MBH in an efficient and cost-effective way, we propose a novel method called BackHauling-as-a-Service (BHaaS) for network planning and Total Cost of Ownership (TCO) analysis based on required traffic demand and a "You-pay-only-for-what-you-use" approach. Furthermore, we enhance BHaaS performance by introducing a more service-aware method called Traffic-Profile-asa- Service (TPaaS) to further drive down the costs based on yearly activated traffic profiles. Results show that BHaaS and TPaaS may enhance by 22% the project benefit compared to traditional TCO model. Finally, we introduce a new cost (CapEx and OpEx) models for 5G multi-tenant Virtualized MBH (V-MBH) as part of our contribution to address the third issue. In fact, in order to enhance the resource sharing and maximize the network profits, we drive a novel pay-as-yougrow and optimization model for the V-MBH called Virtual-Backhaul-as-a-Service (VBaaS). VBaaS can serve as a planning tool to optimize the Project Profit Margin (PPM) while considering the TCO and the yearly generated Return-on-Investment (ROI). We formulate an MNO Pricing Game (MPG) for TCO optimization to calculate the optimal Pareto-Equilibrium pricing strategy for offered Tenant Service Instances (TSI). Then, we compare CapEx, OpEx, TCO, ROI and PPM for a specific use-case known in the industry as CORD project using Traditional MBH (T-MBH) versus Virtualized MBH (V-MBH) as well as using randomized versus Pareto-Equilibrium pricing strategies. The results of our framework offer SPs and MNOs a more precise estimation of traffic demand, an optimized infrastructure planning and yearly resource deployment as well as an optimized TCO analysis (CapEx and OpEx) with enhanced pricing strategy and generated ROI. Numerical results show more than three times increase in network profitability using our proposed solutions compared with Traditional MBH (T-MBH) methods

Visible Light Communication (VLC)

Visible light communication (VLC) using light-emitting diodes (LEDs) or laser diodes (LDs) has been envisioned as one of the key enabling technologies for 6G and Internet of Things (IoT) systems, owing to its appealing advantages, including abundant and unregulated spectrum resources, no electromagnetic interference (EMI) radiation and high security. However, despite its many advantages, VLC faces several technical challenges, such as the limited bandwidth and severe nonlinearity of opto-electronic devices, link blockage and user mobility. Therefore, significant efforts are needed from the global VLC community to develop VLC technology further. This Special Issue, “Visible Light Communication (VLC)”, provides an opportunity for global researchers to share their new ideas and cutting-edge techniques to address the above-mentioned challenges. The 16 papers published in this Special Issue represent the fascinating progress of VLC in various contexts, including general indoor and underwater scenarios, and the emerging application of machine learning/artificial intelligence (ML/AI) techniques in VLC