Assessment of the Effect of Energy Consumption on Trajectory Improvement for a Car-like Robot

[EN] Reducing the energy consumed by a car-like mobile robot makes it possible to move at a lower cost, yet it takes more working time. This paper proposes an optimization algorithm for trajectories with optimal times and analyzes the consequences of restricting the energy consumed on the trajectory obtained for a car-like robot. When modeling the dynamic behavior of the vehicle, it is necessary to consider its inertial parameters, the behavior of the motor, and the basic properties of the tire in its interaction with the ground. To obtain collision-free, minimum-time trajectories quadratic sequential optimization techniques are used, where the objective function is the time taken by the robot to move between two given configurations. This is subject to constraints relating to the vehicle and tires as well as the energy consumed, which is the basis for this paper. We work with a real random distribution of consumed energy values following a normal Gaussian distribution in order to analyze its influence on the trajectories obtained by the vehicle. The energy consumed, the time taken, the maximum velocity reached, and the distance traveled are analyzed in order to characterize the properties of the trajectories obtained. The proposed algorithm has been applied to 101 examples, showing that the computational times needed to obtain the solutions are always lower than those required to realize the trajectories. The results obtained allow us to reach conclusions about the energy efficiency of the trajectories.Valero Chuliá, FJ.; Rubio Montoya, FJ.; Llopis Albert, C. (2019). Assessment of the Effect of Energy Consumption on Trajectory Improvement for a Car-like Robot. Robotica. 37(11):1998-2009. https://doi.org/10.1017/S0263574719000407S199820093711Rubio, F., Valero, F., Lluís Sunyer, J., & Garrido, A. (2010). The simultaneous algorithm and the best interpolation function for trajectory planning. Industrial Robot: An International Journal, 37(5), 441-451. doi:10.1108/01439911011063263Liu, S., & Sun, D. (2014). Minimizing Energy Consumption of Wheeled Mobile Robots via Optimal Motion Planning. IEEE/ASME Transactions on Mechatronics, 19(2), 401-411. doi:10.1109/tmech.2013.2241777Renny Simba, K., Uchiyama, N., & Sano, S. (2016). Real-time smooth trajectory generation for nonholonomic mobile robots using Bézier curves. Robotics and Computer-Integrated Manufacturing, 41, 31-42. doi:10.1016/j.rcim.2016.02.00

A mosaic of eyes

Autonomous navigation is a traditional research topic in intelligent robotics and vehicles, which requires a robot to perceive its environment through onboard sensors such as cameras or laser scanners, to enable it to drive to its goal. Most research to date has focused on the development of a large and smart brain to gain autonomous capability for robots. There are three fundamental questions to be answered by an autonomous mobile robot: 1) Where am I going? 2) Where am I? and 3) How do I get there? To answer these basic questions, a robot requires a massive spatial memory and considerable computational resources to accomplish perception, localization, path planning, and control. It is not yet possible to deliver the centralized intelligence required for our real-life applications, such as autonomous ground vehicles and wheelchairs in care centers. In fact, most autonomous robots try to mimic how humans navigate, interpreting images taken by cameras and then taking decisions accordingly. They may encounter the following difficulties

Energy and Route Optimization of Moving Devices

This thesis highlights our efforts in energy and route optimization of moving devices. We have focused on three categories of such devices; industrial robots in a multi-robot environment, generic vehicles in a vehicle routing problem (VRP) context, automatedguided vehicles (AGVs) in a large-scale flexible manufacturing system (FMS). In the first category, the aim is to develop a non-intrusive energy optimization technique, based on a given set of paths and sequences of operations, such that the original cycle time is not exceeded. We develop an optimization procedure based on a mathematical programming model that aims to minimize the energy consumption and peak power. Our technique has several advantages. It is non-intrusive, i.e. it requires limited changes in the robot program and can be implemented easily. Moreover,it is model-free, in the sense that no particular, and perhaps secret, parameter or dynamic model is required. Furthermore, the optimization can be done offline, within seconds using a generic solver. Through careful experiments, we have shown that it is possible to reduce energy and peak-power up to about 30% and 50% respectively. The second category of moving devices comprises of generic vehicles in a VRP context. We have developed a hybrid optimization approach that integrates a distributed algorithm based on a gossip protocol with a column generation (CG) algorithm, which manages to solve the tested problems faster than the CG algorithm alone. The algorithm is developed for a VRP variation including time windows (VRPTW), which is meant to model the task of scheduling and routing of caregivers in the context of home healthcare routing and scheduling problems (HHRSPs). Moreover,the developed algorithm can easily be parallelized to further increase its efficiency. The last category deals with AGVs. The choice of AGVs was not arbitrary; by design, we decided to transfer our knowledge of energy optimization and routing algorithms to a class of moving devices in which both techniques are of interest. Initially, we improve an existing method of conflict-free AGV scheduling and routing, such that the new algorithm can manage larger problems. A heuristic version of the algorithm manages to solve the problem instances in a reasonable amount of time. Later, we develop strategies to reduce the energy consumption. The study is carried out using an AGV system installed at Volvo Cars. The results are promising; (1)the algorithm reduces performance measures such as makespan up to 50%, while reducing the total travelled distance of the vehicles about 14%, leading to an energy saving of roughly 14%, compared to the results obtained from the original traffic controller. (2) It is possible to reduce the cruise velocities such that more energy is saved, up to 20%, while the new makespan remains better than the original one

Collision avoidance and dynamic modeling for wheeled mobile robots and industrial manipulators

Collision Avoidance and Dynamic Modeling are key topics for researchers dealing with mobile and industrial robotics. A wide variety of algorithms, approaches and methodologies have been exploited, designed or adapted to tackle the problems of finding safe trajectories for mobile robots and industrial manipulators, and of calculating reliable dynamics models able to capture expected and possible also unexpected behaviors of robots. The knowledge of these two aspects and their potential is important to ensure the efficient and correct functioning of Industry 4.0 plants such as automated warehouses, autonomous surveillance systems and assembly lines. Collision avoidance is a crucial aspect to improve automation and safety, and to solve the problem of planning collision-free trajectories in systems composed of multiple autonomous agents such as unmanned mobile robots and manipulators with several degrees of freedom. A rigorous and accurate model explaining the dynamics of robots, is necessary to tackle tasks such as simulation, torque estimation, reduction of mechanical vibrations and design of control law

A comprehensive performance evaluation of different mobile manipulators used as displaceable 3D printers of building elements for the construction industry

The construction industry is currently technologically challenged to incorporate new developments for enhancing the process, such as the use of 3D printing for complex building structures,which is the aim of this brief. To do so, we show a systematic study regarding the usability and performance of mobile manipulators as displaceable 3D printing machinery in construction sites,with emphasis on the three main different existing mobile platforms: the car-like, the unicycleand the omnidirectional (mecanum wheeled), with an UR5 manipulator on them. To evaluate its performance, we propose the printing of the following building elements: helical, square, circular and mesh, with different sizes. As metrics, we consider the total control effort observed in the robots and the total tracking error associated with the energy consumed in the activity to get a more sustainable process. In addition, to further test our work, we constrained the robot workspace thus resemblingreal life construction sites. In general, the statistical results show that the omnidirectional platform presents the best results –lowest tracking error and lowest control effort– for circular, helicoidal and mesh building elements; and car-like platform shows the best results for square-like building element. Then,an innovative performance analysis is achieved for the printing of building elements, with a contribution to the reduction of energy consumptio