IEEE 802.15.4e: a Survey

Several studies have highlighted that the IEEE 802.15.4 standard presents a number of limitations such as low reliability, unbounded packet delays and no protection against interference/fading, that prevent its adoption in applications with stringent requirements in terms of reliability and latency. Recently, the IEEE has released the 802.15.4e amendment that introduces a number of enhancements/modifications to the MAC layer of the original standard in order to overcome such limitations. In this paper we provide a clear and structured overview of all the new 802.15.4e mechanisms. After a general introduction to the 802.15.4e standard, we describe the details of the main 802.15.4e MAC behavior modes, namely Time Slotted Channel Hopping (TSCH), Deterministic and Synchronous Multi-channel Extension (DSME), and Low Latency Deterministic Network (LLDN). For each of them, we provide a detailed description and highlight the main features and possible application domains. Also, we survey the current literature and summarize open research issues

Performance analysis of the contention access period in the slotted IEEE 802.15.4 for wireless body sensor networks

Wireless body sensor networks (WBSN) are a particular type of wireless sensor networks (WSN) that are becoming an important topic in the technological research community. Advances in the reduction of the power consumption and cost of these networks have led to solutions mature enough for their use in a broad range of applications such as sportsman or health monitoring. The development of those applications has been stimulated by the nalization of the IEEE 802.15.4 standard, which de nes the medium access control (MAC) and physical layer (PHY) for low-rate wireless personal area networks (LR-WPAN). One of the MAC schemes proposed is slotted Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA). This project analyzes the performance of this MAC, based on a state-of-the-art analytical model for a star topology, which captures the behavior of the MAC using two Markov chain models; the per-node state model and the channel state model. More importantly, we extend this model to include acknowledged tra c. The impact of including acknowledgments is evaluated in terms of energy consumption, throughput and latency. The performance predicted by the analytical model has been extensively veri ed with simulations using the ns-2 IEEE 802.15.4 contributed module. Throughput, energy consumption and latency analysis is performed. Additionally, we have simulated a statistical channel model describing the radio channel behavior around the human body to calculate the packet error rate (PER) found in a typical WBSN under the aforementioned standard. This PER is then introduced into our analytical model.Ingeniería de Telecomunicació

Energy efficiency in short and wide-area IoT technologies—A survey

In the last years, the Internet of Things (IoT) has emerged as a key application context in the design and evolution of technologies in the transition toward a 5G ecosystem. More and more IoT technologies have entered the market and represent important enablers in the deployment of networks of interconnected devices. As network and spatial device densities grow, energy efficiency and consumption are becoming an important aspect in analyzing the performance and suitability of different technologies. In this framework, this survey presents an extensive review of IoT technologies, including both Low-Power Short-Area Networks (LPSANs) and Low-Power Wide-Area Networks (LPWANs), from the perspective of energy efficiency and power consumption. Existing consumption models and energy efficiency mechanisms are categorized, analyzed and discussed, in order to highlight the main trends proposed in literature and standards toward achieving energy-efficient IoT networks. Current limitations and open challenges are also discussed, aiming at highlighting new possible research directions

Worst-Case Bound Analysis for the Time-Critical MAC behaviors of IEEE 802.15.4e

13th IEEE International Workshop on Factory Communication Systems Communication in Automation (WFCS 2017). 31, May to 2, Jun, 2017, Main track. Trondheim, Norway.With an advancement towards the paradigm of Internet of Things (IoT), in which every device will be interconnected and communicating with each other, the field of wireless sensor networks has helped to resolve an ever-growing demand in meeting deadlines and reducing power consumption. Among several standards that provide support for IoT, the recently published IEEE 802.15.4e protocol is specifically designed to meet the QoS requirements of industrial applications. IEEE 802.15.4e provides five Medium-Access Control (MAC) behaviors, including three that target time-critical applications: Deterministic and Synchronous Multichannel Extension (DSME); Time Slotted Channel Hopping (TSCH) and Low Latency Deterministic Network (LLDN). However, the standard and the literature do not provide any worst-case bound analysis of these behaviors, thus it is not possible to effectively predict their timing performance in an application and accurately devise a network in accordance to such constraints. This paper fills this gap by contributing network models for the three time-critical MAC behaviors using Network Calculus. These models allow deriving the worst-case performance of the MAC behaviors in terms of delay and buffering requirements. We then complement these results by carrying out a thorough performance analysis of these MAC behaviors by observing the impact of different parameters.info:eu-repo/semantics/publishedVersio

Energy efficient medium access control for wireless sensor networks

A wireless sensor network designates a system composed of numerous sensor nodes distributed over an area in order to collect information. The sensor nodes communicate wirelessly with each other in order to self-organize into a multi-hop network, collaborate in the sensing activity and forward the acquired information towards one or more users of the information. Applications of sensor networks are numerous, ranging from environmental monitoring, home and building automation to industrial control. Since sensor nodes are expected to be deployed in large numbers, they must be inexpensive. Communication between sensor nodes should be wireless in order to minimize the deployment cost. The lifetime of sensor nodes must be long for minimal maintenance cost. The most important consequence of the low cost and long lifetime requirements is the need for low power consumption. With today's technology, wireless communication hardware consumes so much power that it is not acceptable to keep the wireless communication interface constantly in operation. As a result, it is required to use a communication protocol with which sensor nodes are able to communicate keeping the communication interface turned-off most of the time. The subject of this dissertation is the design of medium access control protocols permitting to reach a very low power consumption when communicating at a low average throughput in multi-hop wireless sensor networks. In a first part, the performance of a scheduled protocol (time division multiple access, TDMA) is compared to the one of a contention protocol (non-persistent carrier sensing multiple access with preamble sampling, NP-CSMA-PS). The preamble sampling technique is a scheme that avoids constant listening to an idle medium. This thesis presents a low power contention protocol obtained through the combination of preamble sampling with non-persistent carrier sensing multiple access. The analysis of the strengths and weaknesses of TDMA and NP-CSMA-PS led us to propose a solution that exploits TDMA for the transport of frequent periodic data traffic and NP-CSMA-PS for the transport of sporadic signalling traffic required to setup the TDMA schedule. The second part of this thesis describes the WiseMAC protocol. This protocol is a further enhancement of CSMA with preamble sampling that proved to provide both a low power consumption in low traffic conditions and a high energy efficiency in high traffic conditions. It is shown that this protocol can provide either a power consumption or a latency several times lower that what is provided by previously proposed protocols. The WiseMAC protocol was initially designed for multi-hop wireless sensor networks. A comparison with power saving protocols designed specifically for the downlink of infrastructure wireless networks shows that it is also of interest in such cases. An implementation of the WiseMAC protocol has permitted to validate experimentally the proposed concepts and the presented analysis