A Movement of Mobile Sink in Wireless Sensor Network to Conserve Energy

Energy is the major constraint in wireless sensor network. In wireless sensor network with static mobile collector (SNSMC),static nodes located near to sink consume more energy, since the nodes relay the data collected by sensor nodes far away from the sink. The battery drained in short time. This problem is resolved by the MMC-WSN method. While simplifying the routing process, proposing an energy-efficient routing technique based on cluster based method for mobile sink is preferred. First part ,the selection of cluster head (CH) in cluster based method made periodically according to their residual energy and in second part the mobile sink moves across the sensing field and directly collects data from cluster heads and returns to back to initial site in a specific sequence based on spanning graphs. The spanning graph includes the shortest search path for the MS. Finally, a tour-planning algorithm is used on the basis of the spanning graph. An energy efficient routing technique (EFR) in WSNs among obstacles uses the shortest route. In this way, the mobile sink retrieves all detected knowledge among a given time and sends to base station which reduces the packet delay and energy-consumption and WSNs

Energy-efficient routing for mobile data collectors in wireless sensor networks with obstacles

This paper proposes an energy-efficient routing mechanism by introducing intentional mobility to wireless sensor networks (WSNs) with obstacles. In the sensing field, Mobile Data Collectors (MDCs) can freely move for collecting data from sensors. An MDC begins its periodical movement from the base station and finally returns and transports the data to the base station. In physical environments, the sensing field may contain various obstacles. A research challenge is how to find an obstacle-avoiding shortest tour for the MDC. Firstly, we obtain the same size grid cells by dividing the network region. Secondly, according to the line sweep technique, the spanning graph is easily constructed. The spanning graph composed of some grid cells usually includes the shortest search path for the MDC. Then, based on the spanning graph, we can construct a complete graph by Warshall-Floyd algorithm. Finally, we present a heuristic tour-planning algorithm on the basis of the complete graph. Through simulation, the validity of our method is verified. This paper contributes in providing an energy-efficient routing mechanism for the WSNs with obstacles

An eco-friendly hybrid urban computing network combining community-based wireless LAN access and wireless sensor networking

Computer-enhanced smart environments, distributed environmental monitoring, wireless communication, energy conservation and sustainable technologies, ubiquitous access to Internet-located data and services, user mobility and innovation as a tool for service differentiation are all significant contemporary research subjects and societal developments. This position paper presents the design of a hybrid municipal network infrastructure that, to a lesser or greater degree, incorporates aspects from each of these topics by integrating a community-based Wi-Fi access network with Wireless Sensor Network (WSN) functionality. The former component provides free wireless Internet connectivity by harvesting the Internet subscriptions of city inhabitants. To minimize session interruptions for mobile clients, this subsystem incorporates technology that achieves (near-)seamless handover between Wi-Fi access points. The WSN component on the other hand renders it feasible to sense physical properties and to realize the Internet of Things (IoT) paradigm. This in turn scaffolds the development of value-added end-user applications that are consumable through the community-powered access network. The WSN subsystem invests substantially in ecological considerations by means of a green distributed reasoning framework and sensor middleware that collaboratively aim to minimize the network's global energy consumption. Via the discussion of two illustrative applications that are currently being developed as part of a concrete smart city deployment, we offer a taste of the myriad of innovative digital services in an extensive spectrum of application domains that is unlocked by the proposed platform

Behavior-Based Power Management in Autonomous Mobile Robots

Current attempts to prolong the life of a robot on a single battery charge focus on lowering the operating frequency of the onboard hardware, or allowing devices to go to sleep during idle states. These techniques have much overhead and do not come built in to the underlying robotic architecture. In this thesis, battery life is greatly extended through development of a behavior-based power management system, including a Markov decision process power planner, thereby allowing future robots increased time to operate and loiter in their required domain. Behavior-based power management examines sensors needed by the currently active behavior set and powers down sensors not required. Additionally, predictive power planning is made possible through modeling the domain as a Markov decision process in the Deliberator. The planner creates a power policy that accounts for current and future power requirements in stochastic domains. This provides the identification of the ability to use lower-power consuming devices at the start of a goal sequence in order to save power for the areas where higher-power consuming sensors might be needed. Power savings are observed through four simulated robots—no power management, lenient power management, strict power management, and predictive power management—in two case studies: 1) Low sensor intensity environment where robots wander randomly while avoiding obstacles and 2) High sensor intensity environment where robots are required to execute a series of tasks. Testing reveals that in a real life scenario involving multiple goals with multiple sensors, the robot’s battery charge can be extended up to 96% longer when using behavior-based power management with predictive power planning over robots that only rely on traditional power management

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

Estimation and Improvements of the Fundamental QoS in Networks with Random Topologies

The computer communication paradigm is moving towards the ubiquitous computing and Internet of Things (IoT). Small autonomous wirelessly networked devices are becoming more and more present in monitoring and automation of every human interaction with the environment, as well as in collecting various other information from the physical world. Applications, such as remote health monitoring, intelligent homes, early fire, volcano, and earthquake detection, traffic congestion prevention etc., are already present and all share the similar networking philosophy. An additional challenging for the scientific and engineering world is the appropriateness of the alike networks which are to be deployed in the inaccessible regions. These scenarios are typical in environmental and habitat monitoring and in military surveillance. Due to the environmental conditions, these networks can often only be deployed in some quasi-random way. This makes the application design challenging in the sense of coverage, connectivity, network lifetime and data dissemination. For the densely deployed networks, the random geometric graphs are often used to model the networking topology. This paper surveys some of the most important approaches and possibilities in modeling and improvement of coverage and connectivity in randomly deployed networks, with an accent on using the mobility in improving the network functionality