6 research outputs found

    5G infrastructures supporting end-user and operational services:The 5G-XHaul architectural perspective

    Get PDF
    We propose an optical-wireless 5G infrastructure offering converged fronthauling/backhauling functions to support both operational and end-user cloud services. A layered architectural structure required to efficiently support these services is shown. The data plane performance of the proposed infrastructure is evaluated in terms of energy consumption and service delay through a novel modelling framework. Our modelling results show that the proposed architecture can offer significant energy savings but there is a clear trade-off between overall energy consumption and service delay.Peer ReviewedPostprint (author's final draft

    Meeting the requirements to deploy cloud RAN over optical networks

    Get PDF
    Radio access network (RAN) cost savings are expected in future cloud RAN (C-RAN). In contrast to traditional distributed RAN architectures, in C-RAN, remote radio heads (RRHs) from different sites can share baseband processing resources from virtualized baseband unit pools placed in a few central locations (COs). Due to the stringent requirements of the several interfaces needed in C-RAN, optical networks have been proposed to support C-RAN. One of the key elements that needs to be considered are optical transponders. Specifically, sliceable bandwidth-variable transponders (SBVTs) have recently shown many advantages for core optical transport networks. In this paper, we study the connectivity requirements of C-RAN applications and conclude that dynamicity, fine granularity, and elasticity are needed. However, there is no SBVT implementation that supports those requirements, and thus, we propose and assess an SBVT architecture based on dynamic optical arbitrary generation/measurement. We consider different long-term evolution-advanced configurations and study the impact of the centralization level in terms of the capital expense and operating expense. An optimization problem is modeled to decide which COs should be equipped and which equipment, including transponders, needs to be installed. The results show noticeable cost savings from installing the proposed SBVTs compared to installing fixed transponders. Finally, compared to the maximum centralization level, remarkable cost savings are shown when a lower level of centralization is considered.Peer ReviewedPostprint (author's final draft

    Resilient BBU placement in 5G C-RAN over optical aggregation networks

    Get PDF
    The huge data demand envisioned for the 5G requires radical changes in the mobile network architecture and technology. Centralized radio access network (C-RAN) is introduced as a novel mobile network architecture, designed to effectively support the challenging requirements of the future 5G mobile networks. In C-RAN, BaseBand Units (BBUs) are physically separated from their corresponding radio remote heads (RRHs) and located in a central single physical location called BBU pool. The RRHs are connected to the BBU pool via the so-called fronthaul network. The “centralization” demonstrates remarkable benefits in terms of computational resources as well as power savings. Following this centralization, designing a survivable C-RAN becomes crucial as BBU pool and link failures might cause service outage for large number of users. In this paper, we propose three different approaches for the survivable BBU pool placement problem and traffic routing in C-RAN deployment over a 5G optical aggregation network. Namely, we define the following protection scenarios: (1) dedicated path protection, (2) dedicated BBU protection and (3) dedicated BBU and path protection. The three approaches are formalized as integer linear programming (ILP) problems. The ILPs objectives are to minimize the number of BBU pools, the number of used wavelengths and the baseband processing computational resources, in terms of giga operations per second. We provide numerical results to compare the aforementioned protection strategies considering different network topologies. The results show the effect of the latency and the transport–network capacity on the BBU placement. We show the trade-off between the centralization degree and the tight latency requirements. Moreover, we discuss important insights about considering the different objective functions for each protection approach

    Orchestrating datacenters and networks to facilitate the telecom cloud

    Get PDF
    In the Internet of services, information technology (IT) infrastructure providers play a critical role in making the services accessible to end-users. IT infrastructure providers host platforms and services in their datacenters (DCs). The cloud initiative has been accompanied by the introduction of new computing paradigms, such as Infrastructure as a Service (IaaS) and Software as a Service (SaaS), which have dramatically reduced the time and costs required to develop and deploy a service. However, transport networks become crucial to make services accessible to the user and to operate DCs. Transport networks are currently configured with big static fat pipes based on capacity over-provisioning aiming at guaranteeing traffic demand and other parameters committed in Service Level Agreement (SLA) contracts. Notwithstanding, such over-dimensioning adds high operational costs for DC operators and service providers. Therefore, new mechanisms to provide reconfiguration and adaptability of the transport network to reduce the amount of over-provisioned bandwidth are required. Although cloud-ready transport network architecture was introduced to handle the dynamic cloud and network interaction and Elastic Optical Networks (EONs) can facilitate elastic network operations, orchestration between the cloud and the interconnection network is eventually required to coordinate resources in both strata in a coherent manner. In addition, the explosion of Internet Protocol (IP)-based services requiring not only dynamic cloud and network interaction, but also additional service-specific SLA parameters and the expected benefits of Network Functions Virtualization (NFV), open the opportunity to telecom operators to exploit that cloud-ready transport network and their current infrastructure, to efficiently satisfy network requirements from the services. In the telecom cloud, a pay-per-use model can be offered to support services requiring resources from the transport network and its infrastructure. In this thesis, we study connectivity requirements from representative cloud-based services and explore connectivity models, architectures and orchestration schemes to satisfy them aiming at facilitating the telecom cloud. The main objective of this thesis is demonstrating, by means of analytical models and simulation, the viability of orchestrating DCs and networks to facilitate the telecom cloud. To achieve the main goal we first study the connectivity requirements for DC interconnection and services on a number of scenarios that require connectivity from the transport network. Specifically, we focus on studying DC federations, live-TV distribution, and 5G mobile networks. Next, we study different connectivity schemes, algorithms, and architectures aiming at satisfying those connectivity requirements. In particular, we study polling-based models for dynamic inter-DC connectivity and propose a novel notification-based connectivity scheme where inter-DC connectivity can be delegated to the network operator. Additionally, we explore virtual network topology provisioning models to support services that require service-specific SLA parameters on the telecom cloud. Finally, we focus on studying DC and network orchestration to fulfill simultaneously SLA contracts for a set of customers requiring connectivity from the transport network.En la Internet de los servicios, los proveedores de recursos relacionados con tecnologías de la información juegan un papel crítico haciéndolos accesibles a los usuarios como servicios. Dichos proveedores, hospedan plataformas y servicios en centros de datos. La oferta plataformas y servicios en la nube ha introducido nuevos paradigmas de computación tales como ofrecer la infraestructura como servicio, conocido como IaaS de sus siglas en inglés, y el software como servicio, SaaS. La disponibilidad de recursos en la nube, ha contribuido a la reducción de tiempos y costes para desarrollar y desplegar un servicio. Sin embargo, para permitir el acceso de los usuarios a los servicios así como para operar los centros de datos, las redes de transporte resultan imprescindibles. Actualmente, las redes de transporte están configuradas con conexiones estáticas y su capacidad sobredimensionada para garantizar la demanda de tráfico así como los distintos parámetros relacionados con el nivel de servicio acordado. No obstante, debido a que el exceso de capacidad en las conexiones se traduce en un elevado coste tanto para los operadores de los centros de datos como para los proveedores de servicios, son necesarios nuevos mecanismos que permitan adaptar y reconfigurar la red de forma eficiente de acuerdo a las nuevas necesidades de los servicios a los que dan soporte. A pesar de la introducción de arquitecturas que permiten la gestión de redes de transporte y su interacción con los servicios en la nube de forma dinámica, y de la irrupción de las redes ópticas elásticas, la orquestación entre la nube y la red es necesaria para coordinar de forma coherente los recursos en los distintos estratos. Además, la explosión de servicios basados el Protocolo de Internet, IP, que requieren tanto interacción dinámica con la red como parámetros particulares en los niveles de servicio además de los habituales, así como los beneficios que se esperan de la virtualización de funciones de red, representan una oportunidad para los operadores de red para explotar sus recursos y su infraestructura. La nube de operador permite ofrecer recursos del operador de red a los servicios, de forma similar a un sistema basado en pago por uso. En esta Tesis, se estudian requisitos de conectividad de servicios basados en la nube y se exploran modelos de conectividad, arquitecturas y modelos de orquestación que contribuyan a la realización de la nube de operador. El objetivo principal de esta Tesis es demostrar la viabilidad de la orquestación de centros de datos y redes para facilitar la nube de operador, mediante modelos analíticos y simulaciones. Con el fin de cumplir dicho objetivo, primero estudiamos los requisitos de conectividad para la interconexión de centros de datos y servicios en distintos escenarios que requieren conectividad en la red de transporte. En particular, nos centramos en el estudio de escenarios basados en federaciones de centros de datos, distribución de televisión en directo y la evolución de las redes móviles hacia 5G. A continuación, estudiamos distintos modelos de conectividad, algoritmos y arquitecturas para satisfacer los requisitos de conectividad. Estudiamos modelos de conectividad basados en sondeos para la interconexión de centros de datos y proponemos un modelo basado en notificaciones donde la gestión de la conectividad entre centros de datos se delega al operador de red. Estudiamos la provisión de redes virtuales para soportar en la nube de operador servicios que requieren parámetros específicos en los acuerdos de nivel de servicio además de los habituales. Finalmente, nos centramos en el estudio de la orquestación de centros de datos y redes con el objetivo de satisfacer de forma simultánea requisitos para distintos servicios.Postprint (published version
    corecore