Construction of a real vehicular delay-tolerant network testbed

Vehicular Delay-Tolerant Networks (VDTNs) appear as innovative network architecture, able to outline communication challenges caused by issues like variable delays, disruption and intermittent connectivity once that it utilizes the store-carry-and-forward method to allow that in-transit messages (called bundles) can be delivered to the destination by hopping over the mobile vehicles even that an end-to-end path does not exist. Since messages are stored persistently in a buffer and forward to the next hop, a new communication infrastructure is created allowing low-cost asynchronous opportunistic communication under the most critical situations like variable delays and bandwidth constraints. VDTN introduces a layered architecture, acting as an overlay network over the link layer, aggregating incoming IP packets in data bundles (large IP packets), using out-of-band signaling, based on the separation of the control plane and planes. This dissertation presents and evaluates the performance of a real VDTN testbed, demonstrating the real applicability of this new vehicular communication approach. It includes an embedded VDTN testbed created to evaluate safety systems in a real-world scenario. It was used cars with laptops to realize terminal and relay nodes. A real testbed is very important because some complex issues presented in vehicular communication systems can be treated with more realism in real-world environments than in a laboratory environment. The experiments were performed on the internal streets of Brazilian Fiat Automobile manufacturing plant. Performance measurements and analysis were also conduct to verify the efficiency of the system. The results obtained show that safety applications and services can be executed with the actual proposal VDTN architecture in several environments, although notable interference as fading and characteristics of the radio channel, require the use of more modern, appropriate and robust technologies. Thus, the real deployment of VDTNs confirms that VDTNs can be seen as a very promising technology for vehicular communications.Fundação para a Ciência e a Tecnologia (FCT

Performance Assessment of Aggregation and Deaggregation Algorithms in Vehicular Delay-Tolerant Networks

Vehicular Delay-Tolerant Networks (VDTNs) are a new approach for vehicular communications where vehicles cooperate with each other, acting as the communication infrastructure, to provide low-cost asynchronous opportunistic communications. These communication technologies assume variable delays and bandwidth constraints characterized by a non-transmission control protocol/ internet protocol architecture but interacting with it at the edge of the network. VDTNs are based on the principle of asynchronous communications, bundleoriented communication from the DTN architecture, employing a store-carryand- forward routing paradigm. In this sense, VDTNs should use the tight network resources optimizing each opportunistic contact among nodes. At the ingress edge nodes, incoming IP Packets (datagrams) are assembled into large data packets, called bundles. The bundle aggregation process plays an important role on the performance of VDTN applications. Then, this paper presents three aggregation algorithms based on time, bundle size, and a hybrid solution with combination of both. Furthermore, the following four aggregation schemes with quality of service (QoS) support are proposed: 1) single-class bundle with N = M, 2) composite-class bundle with N = M, 3) single-class bundle with N > M, and 4) composite-class bundle with N > M, where N is the number of classes of incoming packets and M is the number of priorities supported by the VDTN core network. The proposed mechanisms were evaluated through a laboratory testbed, called VDTN@Lab. The adaptive hybrid approach and the composite-class schemes present the best performance for different types of traffic load and best priorities distribution, respectively

Performance of management solutions and cooperation approaches for vehicular delay-tolerant networks

A wide range of daily-life applications supported by vehicular networks attracted the interest, not only from the research community, but also from governments and the automotive industry. For example, they can be used to enable services that assist drivers on the roads (e.g., road safety, traffic monitoring), to spread commercial and entertainment contents (e.g., publicity), or to enable communications on remote or rural regions where it is not possible to have a common network infrastructure. Nonetheless, the unique properties of vehicular networks raise several challenges that greatly impact the deployment of these networks. Most of the challenges faced by vehicular networks arise from the highly dynamic network topology, which leads to short and sporadic contact opportunities, disruption, variable node density, and intermittent connectivity. This situation makes data dissemination an interesting research topic within the vehicular networking area, which is addressed by this study. The work described along this thesis is motivated by the need to propose new solutions to deal with data dissemination problems in vehicular networking focusing on vehicular delay-tolerant networks (VDTNs). To guarantee the success of data dissemination in vehicular networks scenarios it is important to ensure that network nodes cooperate with each other. However, it is not possible to ensure a fully cooperative scenario. This situation makes vehicular networks suitable to the presence of selfish and misbehavior nodes, which may result in a significant decrease of the overall network performance. Thus, cooperative nodes may suffer from the overwhelming load of services from other nodes, which comprises their performance. Trying to solve some of these problems, this thesis presents several proposals and studies on the impact of cooperation, monitoring, and management strategies on the network performance of the VDTN architecture. The main goal of these proposals is to enhance the network performance. In particular, cooperation and management approaches are exploited to improve and optimize the use of network resources. It is demonstrated the performance gains attainable in a VDTN through both types of approaches, not only in terms of bundle delivery probability, but also in terms of wasted resources. The results and achievements observed on this research work are intended to contribute to the advance of the state-of-the-art on methods and strategies for overcome the challenges that arise from the unique characteristics and conceptual design of vehicular networks.O vasto número de aplicações e cenários suportados pelas redes veiculares faz com que estas atraiam o interesse não só da comunidade científica, mas também dos governos e da indústria automóvel. A título de exemplo, estas podem ser usadas para a implementação de serviços e aplicações que podem ajudar os condutores dos veículos a tomar decisões nas estradas, para a disseminação de conteúdos publicitários, ou ainda, para permitir que existam comunicações em zonas rurais ou remotas onde não é possível ter uma infraestrutura de rede convencional. Contudo, as propriedades únicas das redes veiculares fazem com que seja necessário ultrapassar um conjunto de desafios que têm grande impacto na sua aplicabilidade. A maioria dos desafios que as redes veiculares enfrentam advêm da grande mobilidade dos veículos e da topologia de rede que está em constante mutação. Esta situação faz com que este tipo de rede seja suscetível de disrupção, que as oportunidades de contacto sejam escassas e de curta duração, e que a ligação seja intermitente. Fruto destas adversidades, a disseminação dos dados torna-se um tópico de investigação bastante promissor na área das redes veiculares e por esta mesma razão é abordada neste trabalho de investigação. O trabalho descrito nesta tese é motivado pela necessidade de propor novas abordagens para lidar com os problemas inerentes à disseminação dos dados em ambientes veiculares. Para garantir o sucesso da disseminação dos dados em ambientes veiculares é importante que este tipo de redes garanta a cooperação entre os nós da rede. Contudo, neste tipo de ambientes não é possível garantir um cenário totalmente cooperativo. Este cenário faz com que as redes veiculares sejam suscetíveis à presença de nós não cooperativos que comprometem seriamente o desempenho global da rede. Por outro lado, os nós cooperativos podem ver o seu desempenho comprometido por causa da sobrecarga de serviços que poderão suportar. Para tentar resolver alguns destes problemas, esta tese apresenta várias propostas e estudos sobre o impacto de estratégias de cooperação, monitorização e gestão de rede no desempenho das redes veiculares com ligações intermitentes (Vehicular Delay-Tolerant Networks - VDTNs). O objetivo das propostas apresentadas nesta tese é melhorar o desempenho global da rede. Em particular, as estratégias de cooperação e gestão de rede são exploradas para melhorar e optimizar o uso dos recursos da rede. Ficou demonstrado que o uso deste tipo de estratégias e metodologias contribui para um aumento significativo do desempenho da rede, não só em termos de agregados de pacotes (“bundles”) entregues, mas também na diminuição do volume de recursos desperdiçados. Os resultados observados neste trabalho procuram contribuir para o avanço do estado da arte em métodos e estratégias que visam ultrapassar alguns dos desafios que advêm das propriedades e desenho conceptual das redes veiculares

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

A Novel Methodology for Route Stability Using AODV in MANET

A MANET is an autonomous collection of mobile users that communicate over relatively bandwidth restricted wireless links. Since the nodes in topology are mobile, the network might change rapidly and unpredictably with time. The network is decentralized; where all network activities including discovering the topology and delivering messages must be executed by the nodes themselves i.e. route discovering functionality will be incorporated into mobile nodes. But, due to mobility of nodes in a network, the path stability is disturbed and hence the link breakage occurs. In this research work, the signal strength is continuously measured till the node go out of range. Then, time is noticed and if time limit is below threshold value, then the path is not selected. On the other hand, if the value of time limit is above threshold, the path is selected and hence the less breakage occurs in that case

Enhancenig OLSR routing protocol using K-means clustering in MANETs

The design of robust routing protocol schemes for MANETs is quite complex, due to the characteristics and structural constraints of this network. A numerous variety of protocol schemes have been proposed in literature. Most of them are based on traditional method of routing, which doesn’t guarantee basic levels of Qos, when the network becomes larger, denser and dynamic. To solve this problem we use one of the most popular methods named clustering. In this work we try to improve the Qos in MANETs. We propose an algorithm of clustering based in the new mobility metric and K-Means method to distribute the nodes into several clusters; it is implemented to standard OLSR protocol giving birth a new protocol named OLSR Kmeans-SDE. The simulations showed that the results obtained by OLSR Kmeans-SDE exceed those obtained by standard OLSR Kmeans and OLSR Kmed+ in terms of, traffic Control, delay and packet delivery ratio

Predicting and Recovering Link Failure Localization Using Competitive Swarm Optimization for DSR Protocol in MANET

Portable impromptu organization is a self-putting together, major construction-less, independent remote versatile hub that exists without even a trace of a determined base station or government association. MANET requires no extraordinary foundation as the organization is unique. Multicasting is an urgent issue in correspondence organizations. Multicast is one of the effective methods in MANET. In multicasting, information parcels from one hub are communicated to a bunch of recipient hubs all at once, at a similar time. In this research work, Failure Node Detection and Efficient Node Localization in a MANET situation are proposed. Localization in MANET is a main area that attracts significant research interest. Localization is a method to determine the nodes’ location in the communication network. A novel routing algorithm, which is used for Predicting and Recovering Link Failure Localization using a Genetic Algorithm with Competitive Swarm Optimization (PRLFL-GACSO) Algorithm is proposed in this study to calculate and recover link failure in MANET. The process of link failure detection is accomplished using mathematical modelling of the genetic algorithm and the routing is attained using the Competitive Swarm optimization technique. The result proposed MANET method makes use of the CSO algorithm, which facilitates a well-organized packet transfer from the source node to the destination node and enhances DSR routing performance. Based on node movement, link value, and endwise delay, the optimal route is found. The main benefit of the PRLFL-GACSO Algorithm is it achieves multiple optimal solutions over global information. Further, premature convergence is avoided using Competitive Swarm Optimization (CSO). The suggested work is measured based on the Ns simulator. The presentation metrix are PDR, endwise delay, power consumption, hit ratio, etc. The presentation of the proposed method is almost 4% and 5% greater than the present TEA-MDRP, RSTA-AOMDV, and RMQS-ua methods. After, the suggested method attains greater performance for detecting and recovering link failure. In future work, the hybrid multiway routing protocols are presented to provide link failure and route breakages and liability tolerance at the time of node failure, and it also increases the worth of service aspects, respectively

Smart Vehicles, Technologies and Main Applications in Vehicular Ad hoc Networks

Vehicular Ad hoc NETworks (VANETs) belong to a subcategory of traditional Mobile Ad hoc NETworks (MANETs). The main feature of VANETs is that mobile nodes are vehicles endowed with sophisticated “on-board” equipments, traveling on constrained paths (i.e., roads and lanes), and communicating each other for message exchange via Vehicle-to-Vehicle (V2V) communication protocols, as well as between vehicles and fixed road-side Access Points (i.e., wireless and cellular network infrastructure), in case of Vehicle-to-Infrastructure (V2I) communications. In this chapter we will introduce the state-of-the-art of recent technologies used in vehicular networks, specifically for smart vehicles, which require novel functionalities such as data communications, accurate positioning, control and decision monitoring