Dual-battery empowered green cellular networks

With awareness of the potential harmful effects to the environment and climate change, on-grid brown energy consumption of information and communications technology (ICT) has drawn much attention. Cellular base stations (BSs) are among the major energy guzzlers in ICT, and their contributions to the global carbon emissions increase sustainedly. It is essential to leverage green energy to power BSs to reduce their on-grid brown energy consumption. However, in order to furthest save on-grid brown energy and decrease the on-grid brown energy electricity expenses, most existing green energy related works only pursue to maximize the green energy utilization while compromising the services received by the mobile users. In reality, dissatisfaction of services may eventually lead to loss of market shares and profits of the network providers. In this research, a dual-battery enabled profit driven user association scheme is introduced to jointly consider the traffic delivery latency and green energy utilization to maximize the profits for the network providers in heterogeneous cellular networks. Since this profit driven user association optimization problem is NP-hard, some heuristics are presented to solve the problem with low computational complexity. Finally, the performance of the proposed algorithm is validated through extensive simulations. In addition, the Internet of Things (IoT) heralds a vision of future Internet where all physical things/devices are connected via a network to promote a heightened level of awareness about our world and dramatically improve our daily lives. Nonetheless, most wireless technologies utilizing unlicensed bands cannot provision ubiquitous and quality IoT services. In contrast, cellular networks support large-scale, quality of service guaranteed, and secured communications. However, tremendous proximal communications via local BSs will lead to severe traffic congestion and huge energy consumption in conventional cellular networks. Device-to-device (D2D) communications can potentially offload traffic from and reduce energy consumption of BSs. In order to realize the vision of a truly global IoT, a novel architecture, i.e., overlay-based green relay assisted D2D communications with dual batteries in heterogeneous cellular networks, is introduced. By optimally allocating the network resource, the introduced resource allocation method provisions the IoT services and minimizes the overall energy consumption of the pico relay BSs. By balancing the residual green energy among the pico relay BSs, the green energy utilization is maximized; this furthest saves the on-grid energy. Finally, the performance of the proposed architecture is validated through extensive simulations. Furthermore, the mobile devices serve the important roles in cellular networks and IoT. With the ongoing worldwide development of IoT, an unprecedented number of edge devices imperatively consume a substantial amount of energy. The overall IoT mobile edge devices have been predicted to be the leading energy guzzler in ICT by 2020. Therefore, a three-step green IoT architecture is proposed, i.e., ambient energy harvesting, green energy wireless transfer and green energy balancing, in this research. The latter step reinforces the former one to ensure the availability of green energy. The basic design principles for these three steps are laid out and discussed. In summary, based on the dual-battery architecture, this dissertation research proposes solutions for the three aspects, i.e., green cellular BSs, green D2D communications and green devices, to hopefully and eventually actualize green cellular access networks, as part of the ongoing efforts in greening our society and environment

Secrecy Throughput Maximization for Full-Duplex Wireless Powered IoT Networks under Fairness Constraints

In this paper, we study the secrecy throughput of a full-duplex wireless powered communication network (WPCN) for internet of things (IoT). The WPCN consists of a full-duplex multi-antenna base station (BS) and a number of sensor nodes. The BS transmits energy all the time, and each node harvests energy prior to its transmission time slot. The nodes sequentially transmit their confidential information to the BS, and the other nodes are considered as potential eavesdroppers. We first formulate the sum secrecy throughput optimization problem of all the nodes. The optimization variables are the duration of the time slots and the BS beamforming vectors in different time slots. The problem is shown to be non-convex. To tackle the problem, we propose a suboptimal two stage approach, referred to as sum secrecy throughput maximization (SSTM). In the first stage, the BS focuses its beamforming to blind the potential eavesdroppers (other nodes) during information transmission time slots. Then, the optimal beamforming vector in the initial non-information transmission time slot and the optimal time slots are derived. We then consider fairness among the nodes and propose max-min fair (MMF) and proportional fair (PLF) algorithms. The MMF algorithm maximizes the minimum secrecy throughput of the nodes, while the PLF tries to achieve a good trade-off between the sum secrecy throughput and fairness among the nodes. Through numerical simulations, we first demonstrate the superior performance of the SSTM to uniform time slotting and beamforming in different settings. Then, we show the effectiveness of the proposed fair algorithms

A Test Bed for Evaluating the Performance of IoT Networks

The use of smaller, personal IoT networks has increased over the past several years. These devices demand a lot of resources but only have limited access. To establish and sustain a flexible network connection, 6LoWPAN with RPL protocol is commonly used. While RPL provides a low-cost solution for connection, it lacks load balancing mechanisms. Improvements in OF load balancing can be implemented to strengthen network stability. This paper proposes a test bed configuration to show the toll of frequent parent switching on 6LoWPAN. Contiki’s RPL 6LoWPAN software runs on STM32 Nucleo microcontrollers with expansion boards for this test bed. The configuration tests frequency of parent changes and packet loss to demonstrate network instability of different RPL OFs. Tests on MRHOF for RPL were executed to confirm the working configuration. Results, with troubleshooting and improvements, show a working bed. The laid-out configuration provides a means for testing network stability in IoT networks

Energy Management in a Cooperative Energy Harvesting Wireless Sensor Network

In this paper, we consider the problem of finding an optimal energy management policy for a network of sensor nodes capable of harvesting their own energy and sharing it with other nodes in the network. We formulate this problem in the discounted cost Markov decision process framework and obtain good energy-sharing policies using the Deep Deterministic Policy Gradient (DDPG) algorithm. Earlier works have attempted to obtain the optimal energy allocation policy for a single sensor and for multiple sensors arranged on a mote with a single centralized energy buffer. Our algorithms, on the other hand, provide optimal policies for a distributed network of sensors individually harvesting energy and capable of sharing energy amongst themselves. Through simulations, we illustrate that the policies obtained by our DDPG algorithm using this enhanced network model outperform algorithms that do not share energy or use a centralized energy buffer in the distributed multi-nodal case.Comment: 11 pages, 4 figure

Enabling Hardware Green Internet of Things: A review of Substantial Issues

Between now and the near future, the Internet of Things (IoT) will redesign the socio-ecological morphology of the human terrain. The IoT ecosystem deploys diverse sensor platforms connecting millions of heterogeneous objects through the Internet. Irrespective of sensor functionality, most sensors are low energy consumption devices and are designed to transmit sporadically or continuously. However, when we consider the millions of connected sensors powering various user applications, their energy efficiency (EE) becomes a critical issue. Therefore, the importance of EE in IoT technology, as well as the development of EE solutions for sustainable IoT technology, cannot be overemphasised. Propelled by this need, EE proposals are expected to address the EE issues in the IoT context. Consequently, many developments continue to emerge, and the need to highlight them to provide clear insights to researchers on eco-sustainable and green IoT technologies becomes a crucial task. To pursue a clear vision of green IoT, this study aims to present the current state-of-the art insights into energy saving practices and strategies on green IoT. The major contribution of this study includes reviews and discussions of substantial issues in the enabling of hardware green IoT, such as green machine to machine, green wireless sensor networks, green radio frequency identification, green microcontroller units, integrated circuits and processors. This review will contribute significantly towards the future implementation of green and eco-sustainable IoT

Blockchain-Based Incentive Energy-Knowledge Trading in IoT: Joint Power Transfer and AI Design

Recently, edge artificial intelligence techniques (e.g., federated edge learning) are emerged to unleash the potential of big data from Internet of Things (IoT). By learning knowledge on local devices, data privacy-preserving and quality of service (QoS) are guaranteed. Nevertheless, the dilemma between the limited on-device battery capacities and the high energy demands in learning is not resolved. When the on-device battery is exhausted, the edge learning process will have to be interrupted. In this paper, we propose a novel Wirelessly Powered Edge intelliGence (WPEG) framework, which aims to achieve a stable, robust, and sustainable edge intelligence by energy harvesting (EH) methods. Firstly, we build a permissioned edge blockchain to secure the peer-to-peer (P2P) energy and knowledge sharing in our framework. To maximize edge intelligence efficiency, we then investigate the wirelessly-powered multi-agent edge learning model and design the optimal edge learning strategy. Moreover, by constructing a two-stage Stackelberg game, the underlying energy-knowledge trading incentive mechanisms are also proposed with the optimal economic incentives and power transmission strategies. Finally, simulation results show that our incentive strategies could optimize the utilities of both parties compared with classic schemes, and our optimal learning design could realize the optimal learning efficiency