PACE: Simple Multi-hop Scheduling for Single-radio 802.11-based Stub Wireless Mesh Networks

IEEE 802.11-based Stub Wireless Mesh Networks (WMNs) are a cost-effective and flexible solution to extend wired network infrastructures. Yet, they suffer from two major problems: inefficiency and unfairness. A number of approaches have been proposed to tackle these problems, but they are too restrictive, highly complex, or require time synchronization and modifications to the IEEE 802.11 MAC. PACE is a simple multi-hop scheduling mechanism for Stub WMNs overlaid on the IEEE 802.11 MAC that jointly addresses the inefficiency and unfairness problems. It limits transmissions to a single mesh node at each time and ensures that each node has the opportunity to transmit a packet in each network-wide transmission round. Simulation results demonstrate that PACE can achieve optimal network capacity utilization and greatly outperforms state of the art CSMA/CA-based solutions as far as goodput, delay, and fairness are concerned

CapEst: A Measurement-based Approach to Estimating Link Capacity in Wireless Networks

Estimating link capacity in a wireless network is a complex task because the available capacity at a link is a function of not only the current arrival rate at that link, but also of the arrival rate at links which interfere with that link as well as of the nature of interference between these links. Models which accurately characterize this dependence are either too computationally complex to be useful or lack accuracy. Further, they have a high implementation overhead and make restrictive assumptions, which makes them inapplicable to real networks. In this paper, we propose CapEst, a general, simple yet accurate, measurement-based approach to estimating link capacity in a wireless network. To be computationally light, CapEst allows inaccuracy in estimation; however, using measurements, it can correct this inaccuracy in an iterative fashion and converge to the correct estimate. Our evaluation shows that CapEst always converged to within 5% of the correct value in less than 18 iterations. CapEst is model-independent, hence, is applicable to any MAC/PHY layer and works with auto-rate adaptation. Moreover, it has a low implementation overhead, can be used with any application which requires an estimate of residual capacity on a wireless link and can be implemented completely at the network layer without any support from the underlying chipset

Cloned Access Point Detection and Point Detection and Prevention Mechanism in IEEE 802.11 Wireless Mesh Networks

IEEE 802.11 Wireless Mesh Network (WMN) is an emerging low cost, decentralized community-based broadband technology, which is based on self-healing and multi-hop deployment of Access Points (APs), so that to increase the coverage area with maximum freedom to end-users to join or leave the network from anywhere anytime having low deployment and maintenance cost. Such kind of decentralized structure and multihop architecture increases its security vulnerabilities especially against the APs. One of such possible security attack is the placement of cloned AP to create serious performance degradation in IEEE 802.11 WMN. In this paper, we discuss the different security vulnerabilities of AP in IEEE 802.11 WMN along with possible research directions. We also propose a mutual cooperation mechanism between the multi-hop APs and serving gateway so that to detect and prevent the possibility of cloned AP. In this way the large scale exploitation of IEEE 802.11 WMN can be eliminated

Bringing Stability to Wireless Mesh Networks

Wireless mesh networks were designed as a mean to rapidly deliver large-scale communication capabilities without the support of any prior infrastructure. Among the different properties of mesh networks, the self-organizing feature is particularly interesting for developing countries or for emergency situations. However, these benefits also bring new challenges. For example, the scheduling decision needs to be performed in a distributed manner at each node of the network. Toward this goal, most of the current mesh deployments are based on the IEEE 802.11 protocol, even if it was not designed for multi-hop communications. The main goals of this thesis are (i) to understand and model the behavior of IEEE 802.11-based mesh networks and more specifically the root causes that lead to congestion and network instability; (ii) to develop an experimental infrastructure in order to validate with measurements both the problems and the solutions discussed in this thesis; (iii) to build efficient hop-by-hop scheduling schemes that provide congestion control and inter-flow fairness in a practical way and that are backward-compatible with the current protocol; and (iv) to explain the non-monotonic relation between the end-to-end throughput and the source rate and to introduce a model to derive the rationale behind this artifact. First, we propose a Markovian model and we introduce the notion of stealing effect to explain the root causes behind the 3-hop stability boundary, where linear networks up to 3 hops are stable, and larger topologies are intrinsically unstable. We validate our analytical results both through simulations and through measurements on a small testbed deployment. Second, to support the experimental research presented in this thesis, we design and deploy a large-scale mesh network testbed on the EPFL campus. We plan our architecture to be as flexible as possible in order to support a wide range of other research areas such as IEEE 802.11 indoor localization and opportunistic routing. Third, we introduce EZ-flow, a novel hop-by-hop congestion-control mechanism that operates at the Medium Access Control layer. EZ-flow is fully backward-compatible with the existing IEEE 802.11 deployments and it works without any form of message passing. To perform its task EZ-flow takes advantage of the broadcast nature of the wireless medium in order to passively derive the queue size at the next-hop node. This information is then used by each node to adapt accordingly its channel access probability, through the contention window parameter of IEEE 802.11. After detailing the different components of EZ-flow, we analyze its performance analytically, through simulations and real measurements. Fourth, we show that hop-by-hop congestion-control can be efficiently performed at the network layer in order to not abuse the contention mechanism of IEEE 802.11. Additionally, we introduce a complete framework that jointly achieves congestion-control and fairness without requiring a prior knowledge of the network capacity region. To achieve the fairness part, we propose the Explore & Enhance algorithm that finds a fair and achievable rate allocation vector that maximizes a desired function of utility. We show experimentally that this algorithm reaches its objective by alternating between exploration phases (to discover the capacity region) and enhancement phases (to improve the utility through a gradient ascent). Finally, we note that, as opposed to wired networks, the multi-hop wireless capacity is usually unknown and time-varying. Therefore, we study how the end-to-end throughput evolves as a function of the source rate when operating both below and above the network capacity. We note that this evolution follows a non-monotonic curve and we explain, through an analytical model and simulations, the rationale behind the different transition points of this curve. Following our analysis, we show that no end-to-end congestion control can be throughput-optimal if it operates directly over IEEE 802.11. Hence, this supports the methodology of performing congestion control in a hop-by-hop manner. After validating experimentally the non-monotonicity, we compare through simulations different state-of-the-art scheduling schemes and we highlight the important tradeoff that exists in congestion-control schemes between efficiency (i.e., throughput-optimality) and robustness (i.e., no throughput collapse when the sources attempt to operate at a rate above the network capacity)

Max-min Fairness in 802.11 Mesh Networks

In this paper we build upon the recent observation that the 802.11 rate region is log-convex and, for the first time, characterise max-min fair rate allocations for a large class of 802.11 wireless mesh networks. By exploiting features of the 802.11e/n MAC, in particular TXOP packet bursting, we are able to use this characterisation to establish a straightforward, practically implementable approach for achieving max-min throughput fairness. We demonstrate that this approach can be readily extended to encompass time-based fairness in multi-rate 802.11 mesh networks

TCP-Aware Backpressure Routing and Scheduling

In this work, we explore the performance of backpressure routing and scheduling for TCP flows over wireless networks. TCP and backpressure are not compatible due to a mismatch between the congestion control mechanism of TCP and the queue size based routing and scheduling of the backpressure framework. We propose a TCP-aware backpressure routing and scheduling that takes into account the behavior of TCP flows. TCP-aware backpressure (i) provides throughput optimality guarantees in the Lyapunov optimization framework, (ii) gracefully combines TCP and backpressure without making any changes to the TCP protocol, (iii) improves the throughput of TCP flows significantly, and (iv) provides fairness across competing TCP flows

Local heuristic for the refinement of multi-path routing in wireless mesh networks

We consider wireless mesh networks and the problem of routing end-to-end traffic over multiple paths for the same origin-destination pair with minimal interference. We introduce a heuristic for path determination with two distinguishing characteristics. First, it works by refining an extant set of paths, determined previously by a single- or multi-path routing algorithm. Second, it is totally local, in the sense that it can be run by each of the origins on information that is available no farther than the node's immediate neighborhood. We have conducted extensive computational experiments with the new heuristic, using AODV and OLSR, as well as their multi-path variants, as underlying routing methods. For two different CSMA settings (as implemented by 802.11) and one TDMA setting running a path-oriented link scheduling algorithm, we have demonstrated that the new heuristic is capable of improving the average throughput network-wide. When working from the paths generated by the multi-path routing algorithms, the heuristic is also capable to provide a more evenly distributed traffic pattern