Network-aware design-space exploration of a power-efficient embedded application

The paper presents the design and multi-parameter optimization of a networked embedded application for the health-care domain. Several hardware, software, and application parameters, such as clock frequency, sensor sampling rate, data packet rate, are tuned at design- and run-time according to application specifications and operating conditions to optimize hardware requirements, packet loss, power consumption. Experimental results show that further power efficiency can be achieved by considering also communication aspects during design space exploratio

The Benefits of Using Clock Gating in the Design of Networks-on-Chip

Networks-on-chip (NoC) are critical to the design of complex multi-core system-on-chip (SoC) architectures. Since SoCs are characterized by a combination of high performance requirements and stringent energy constraints, NoCs must be realized with low-power design techniques. Since the use of semicustom design flow based on standard-cell technology libraries is essential to cope with the SoC design complexity challenges under tight time-to-market constraints, NoC must be implemented using logic synthesis. In this paper we analyze the major power reduction that clock gating can deliver when applied to the synthesis of a NoC in the context of a semi-custom automated design flow

A fast and retargetable framework for logic-IP-internal electromigration assessment comprehending advanced waveform effects

A new methodology for system-on-chip-level logic-IP-internal electromigration verification is presented in this paper, which significantly improves accuracy by comprehending the impact of the parasitic RC loading and voltage-dependent pin capacitance in the library model. It additionally provides an on-the-fly retargeting capability for reliability constraints by allowing arbitrary specifications of lifetimes, temperatures, voltages, and failure rates, as well as interoperability of the IPs across foundries. The characterization part of the methodology is expedited through the intelligent IP-response modeling. The ultimate benefit of the proposed approach is demonstrated on a 28-nm design by providing an on-the-fly specification of retargeted reliability constraints. The results show a high correlation with SPICE and were obtained with an order of magnitude reduction in the verification runtime.Peer ReviewedPostprint (author's final draft

Modeling DVFS and Power-Gating Actuators for Cycle-Accurate NoC-Based Simulators

Networks-on-chip (NoCs) are a widely recognized viable interconnection paradigm to support the multi-core revolution. One of the major design issues of multicore architectures is still the power, which can no longer be considered mainly due to the cores, since the NoC contribution to the overall energy budget is relevant. To face both static and dynamic power while balancing NoC performance, different actuators have been exploited in literature, mainly dynamic voltage frequency scaling (DVFS) and power gating. Typically, simulation-based tools are employed to explore the huge design space by adopting simplified models of the components. As a consequence, the majority of state-of-the-art on NoC power-performance optimization do not accurately consider timing and power overheads of actuators, or (even worse) do not consider them at all, with the risk of overestimating the benefits of the proposed methodologies. This article presents a simulation framework for power-performance analysis of multicore architectures with specific focus on the NoC. It integrates accurate power gating and DVFS models encompassing also their timing and power overheads. The value added of our proposal is manyfold: (i) DVFS and power gating actuators are modeled starting from SPICE-level simulations; (ii) such models have been integrated in the simulation environment; (iii) policy analysis support is plugged into the framework to enable assessment of different policies; (iv) a flexible GALS (globally asynchronous locally synchronous) support is provided, covering both handshake and FIFO re-synchronization schemas. To demonstrate both the flexibility and extensibility of our proposal, two simple policies exploiting the modeled actuators are discussed in the article

Digital processor array implementation aspects of a 3D multi-layer vision architecture

Trabajo presentado al 12th CNNA celebrado en Berkeley (USA) del 3 al 5 de febrero de 2010.Technological aspects of the 3D integration of a multilayer combined mixed-signal and digital sensor-processor array chip is described. The 3D integration raises the question of signal routing, power distribution, and heat dissipation, which aspects are considered systematically in the digital processor array layer as part of the multi layer structure. We have developed a linear programming based evaluation system to identify the proper architecture and its parameters.The work is supported by the Eutecus ONR-BAA Co. Num N00173-08-C-4005 VISCUBE project.Peer Reviewe

Zuverlässige und Energieeffiziente gemischt-kritische Echtzeit On-Chip Systeme

Multi- and many-core embedded systems are increasingly becoming the target for many applications that require high performance under varying conditions. A resulting challenge is the control, and reliable operation of such complex multiprocessing architectures under changes, e.g., high temperature and degradation. In mixed-criticality systems where many applications with varying criticalities are consolidated on the same execution platform, fundamental isolation requirements to guarantee non-interference of critical functions are crucially important. While Networks-on-Chip (NoCs) are the prevalent solution to provide scalable and efficient interconnects for the multiprocessing architectures, their associated energy consumption has immensely increased. Specifically, hard real-time NoCs must manifest limited energy consumption as thermal runaway in such a core shared resource jeopardizes the whole system guarantees. Thus, dynamic energy management of NoCs, as opposed to the related work static solutions, is highly necessary to save energy and decrease temperature, while preserving essential temporal requirements. In this thesis, we introduce a centralized management to provide energy-aware NoCs for hard real-time systems. The design relies on an energy control network, developed on top of an existing switch arbitration network to allow isolation between energy optimization and data transmission. The energy control layer includes local units called Power-Aware NoC controllers that dynamically optimize NoC energy depending on the global state and applications’ temporal requirements. Furthermore, to adapt to abnormal situations that might occur in the system due to degradation, we extend the concept of NoC energy control to include the entire system scope. That is, online resource management employing hierarchical control layers to treat system degradation (imminent core failures) is supported. The mechanism applies system reconfiguration that involves workload migration. For mixed-criticality systems, it allows flexible boundaries between safety-critical and non-critical subsystems to safely apply the reconfiguration, preserving fundamental safety requirements and temporal predictability. Simulation and formal analysis-based experiments on various realistic usecases and benchmarks are conducted showing significant improvements in NoC energy-savings and in treatment of system degradation for mixed-criticality systems improving dependability over the status quo.Eingebettete Many- und Multi-core-Systeme werden zunehmend das Ziel für Anwendungen, die hohe Anfordungen unter unterschiedlichen Bedinungen haben. Für solche hochkomplexed Multi-Prozessor-Systeme ist es eine grosse Herausforderung zuverlässigen Betrieb sicherzustellen, insbesondere wenn sich die Umgebungseinflüsse verändern. In Systeme mit gemischter Kritikalität, in denen viele Anwendungen mit unterschiedlicher Kritikalität auf derselben Ausführungsplattform bedient werden müssen, sind grundlegende Isolationsanforderungen zur Gewährleistung der Nichteinmischung kritischer Funktionen von entscheidender Bedeutung. Während On-Chip Netzwerke (NoCs) häufig als skalierbare Verbindung für die Multiprozessor-Architekturen eingesetzt werden, ist der damit verbundene Energieverbrauch immens gestiegen. Daher sind dynamische Plattformverwaltungen, im Gegensatz zu den statischen, zwingend notwendig, um ein System an die oben genannten Veränderungen anzupassen und gleichzeitig Timing zu gewährleisten. In dieser Arbeit entwickeln wir energieeffiziente NoCs für harte Echtzeitsysteme. Das Design basiert auf einem Energiekontrollnetzwerk, das auf einem bestehenden Switch-Arbitration-Netzwerk entwickelt wurde, um eine Isolierung zwischen Energieoptimierung und Datenübertragung zu ermöglichen. Die Energiesteuerungsschicht umfasst lokale Einheiten, die als Power-Aware NoC-Controllers bezeichnet werden und die die NoC-Energie in Abhängigkeit vom globalen Zustand und den zeitlichen Anforderungen der Anwendungen optimieren. Darüber hinaus wird das Konzept der NoC-Energiekontrolle zur Anpassung an Anomalien, die aufgrund von Abnutzung auftreten können, auf den gesamten Systemumfang ausgedehnt. Online- Ressourcenverwaltungen, die hierarchische Kontrollschichten zur Behandlung Abnutzung (drohender Kernausfälle) einsetzen, werden bereitgestellt. Bei Systemen mit gemischter Kritikalität erlaubt es flexible Grenzen zwischen sicherheitskritischen und unkritischen Subsystemen, um die Rekonfiguration sicher anzuwenden, wobei grundlegende Sicherheitsanforderungen erhalten bleiben und Timing Vorhersehbarkeit. Experimente werden auf der Basis von Simulationen und formalen Analysen zu verschiedenen realistischen Anwendungsfallen und Benchmarks durchgeführt, die signifikanten Verbesserungen bei On-Chip Netzwerke-Energieeinsparungen und bei der Behandlung von Abnutzung für Systeme mit gemischter Kritikalität zur Verbesserung die Systemstabilität gegenüber dem bisherigen Status quo zeigen

Evaluating Architectural, Redundancy, and Implementation Strategies for Radiation Hardening of FinFET Integrated Circuits

In this article, authors explore radiation hardening techniques through the design of a test chip implemented in 16-nm FinFET technology, along with architectural and redundancy design space exploration of its modules. Nine variants of matrix multiplication were taped out and irradiated with neutrons. The results obtained from the neutron campaign revealed that the radiation-hardened variants present superior resiliency when either local or global triple modular redundancy (TMR) schemes are employed. Furthermore, simulation-based fault injection was utilized to validate the measurements and to explore the effects of different implementation strategies on failure rates. We further show that the interplay between these different implementation strategies is not trivial to capture and that synthesis optimizations can effectively break assumptions about the effectiveness of redundancy schemes

Virtual Platform-Based Design Space Exploration of Power-Efficient Distributed Embedded Applications

Networked embedded systems are essential building blocks of a broad variety of distributed applications ranging from agriculture to industrial automation to healthcare and more. These often require specific energy optimizations to increase the battery lifetime or to operate using energy harvested from the environment. Since a dominant portion of power consumption is determined and managed by software, the software development process must have access to the sophisticated power management mechanisms provided by state-of-the-art hardware platforms to achieve the best tradeoff between system availability and reactivity. Furthermore, internode communications must be considered to properly assess the energy consumption. This article describes a design flow based on a SystemC virtual platform including both accurate power models of the hardware components and a fast abstract model of the wireless network. The platform allows both model-driven design of the application and the exploration of power and network management alternatives. These can be evaluated in different network scenarios, allowing one to exploit power optimization strategies without requiring expensive field trials. The effectiveness of the approach is demonstrated via experiments on a wireless body area network application

POWER AND PERFORMANCE STUDIES OF THE EXPLICIT MULTI-THREADING (XMT) ARCHITECTURE

Power and thermal constraints gained critical importance in the design of microprocessors over the past decade. Chipmakers failed to keep power at bay while sustaining the performance growth of serial computers at the rate expected by consumers. As an alternative, they turned to fitting an increasing number of simpler cores on a single die. While this is a step forward for relaxing the constraints, the issue of power is far from resolved and it is joined by new challenges which we explain next. As we move into the era of many-cores, processors consisting of 100s, even 1000s of cores, single-task parallelism is the natural path for building faster general-purpose computers. Alas, the introduction of parallelism to the mainstream general-purpose domain brings another long elusive problem to focus: ease of parallel programming. The result is the dual challenge where power efficiency and ease-of-programming are vital for the prevalence of up and coming many-core architectures. The observations above led to the lead goal of this dissertation: a first order validation of the claim that even under power/thermal constraints, ease-of-programming and competitive performance need not be conflicting objectives for a massively-parallel general-purpose processor. As our platform, we choose the eXplicit Multi-Threading (XMT) many-core architecture for fine grained parallel programs developed at the University of Maryland. We hope that our findings will be a trailblazer for future commercial products. XMT scales up to thousand or more lightweight cores and aims at improving single task execution time while making the task for the programmer as easy as possible. Performance advantages and ease-of-programming of XMT have been shown in a number of publications, including a study that we present in this dissertation. Feasibility of the hardware concept has been exhibited via FPGA and ASIC (per our partial involvement) prototypes. Our contributions target the study of power and thermal envelopes of an envisioned 1024-core XMT chip (XMT1024) under programs that exist in popular parallel benchmark suites. First, we compare XMT against an area and power equivalent commercial high-end many-core GPU. We demonstrate that XMT can provide an average speedup of 8.8x in irregular parallel programs that are common and important in general purpose computing. Even under the worst-case power estimation assumptions for XMT, average speedup is only reduced by half. We further this study by experimentally evaluating the performance advantages of Dynamic Thermal Management (DTM), when applied to XMT1024. DTM techniques are frequently used in current single and multi-core processors, however until now their effects on single-tasked many-cores have not been examined in detail. It is our purpose to explore how existing techniques can be tailored for XMT to improve performance. Performance improvements up to 46% over a generic global management technique has been demonstrated. The insights we provide can guide designers of other similar many-core architectures. A significant infrastructure contribution of this dissertation is a highly configurable cycle-accurate simulator, XMTSim. To our knowledge, XMTSim is currently the only publicly-available shared-memory many-core simulator with extensive capabilities for estimating power and temperature, as well as evaluating dynamic power and thermal management algorithms. As a major component of the XMT programming toolchain, it is not only used as the infrastructure in this work but also contributed to other publications and dissertations