Review: optical fiber sensors for civil engineering applications

Optical fiber sensor (OFS) technologies have developed rapidly over the last few decades, and various types of OFS have found practical applications in the field of civil engineering. In this paper, which is resulting from the work of the RILEM technical committee “Optical fiber sensors for civil engineering applications”, different kinds of sensing techniques, including change of light intensity, interferometry, fiber Bragg grating, adsorption measurement and distributed sensing, are briefly reviewed to introduce the basic sensing principles. Then, the applications of OFS in highway structures, building structures, geotechnical structures, pipelines as well as cables monitoring are described, with focus on sensor design, installation technique and sensor performance. It is believed that the State-of-the-Art review is helpful to engineers considering the use of OFS in their projects, and can facilitate the wider application of OFS technologies in construction industry

Bridges Structural Health Monitoring and Deterioration Detection Synthesis of Knowledge and Technology

INE/AUTC 10.0

Oceanus.

v. 42, no. 1 (2000

Dynamic Characterization of Open-ended Pipe Piles in Marine Environment

This chapter is focused on the experimental investigations that can be carried out to dynamically characterize open-ended pipe piles in marine environment. Different test typologies, such as impact load test, free vibration test, forced vibration test, and ambient vibration test, are presented and described with the purpose to provide the right tools to analyze the dynamic behavior, at both small and large strains, of single piles or a system of piles. The appropriate instrumentation, with the suitable protection from marine environment and pile driving installation procedure, is also illustrated. Furthermore, the most common signal processing techniques useful for handling the experimental raw data are addressed together with the analysis techniques for the evaluation of the modal parameters: natural frequencies, damping ratios, and mode shapes. Finally, a part of the experimental campaign carried out by the authors on near-shore open-ended pipe piles is reported as a case study

Dense and long-term monitoring of Earth surface processes with passive RFID -- a review

Billions of Radio-Frequency Identification (RFID) passive tags are produced yearly to identify goods remotely. New research and business applications are continuously arising, including recently localization and sensing to monitor earth surface processes. Indeed, passive tags can cost 10 to 100 times less than wireless sensors networks and require little maintenance, facilitating years-long monitoring with ten's to thousands of tags. This study reviews the existing and potential applications of RFID in geosciences. The most mature application today is the study of coarse sediment transport in rivers or coastal environments, using tags placed into pebbles. More recently, tag localization was used to monitor landslide displacement, with a centimetric accuracy. Sensing tags were used to detect a displacement threshold on unstable rocks, to monitor the soil moisture or temperature, and to monitor the snowpack temperature and snow water equivalent. RFID sensors, available today, could monitor other parameters, such as the vibration of structures, the tilt of unstable boulders, the strain of a material, or the salinity of water. Key challenges for using RFID monitoring more broadly in geosciences include the use of ground and aerial vehicles to collect data or localize tags, the increase in reading range and duration, the ability to use tags placed under ground, snow, water or vegetation, and the optimization of economical and environmental cost. As a pattern, passive RFID could fill a gap between wireless sensor networks and manual measurements, to collect data efficiently over large areas, during several years, at high spatial density and moderate cost.Comment: Invited paper for Earth Science Reviews. 50 pages without references. 31 figures. 8 table

Final Report DE-EE0005380: Assessment of Offshore Wind Farm Effects on Sea Surface, Subsurface and Airborne Electronic Systems

Offshore wind energy is a valuable resource that can provide a significant boost to the US renewable energy portfolio. A current constraint to the development of offshore wind farms is the potential for interference to be caused by large wind farms on existing electronic and acoustical equipment such as radar and sonar systems for surveillance, navigation and communications. The US Department of Energy funded this study as an objective assessment of possible interference to various types of equipment operating in the marine environment where offshore wind farms could be installed. The objective of this project was to conduct a baseline evaluation of electromagnetic and acoustical challenges to sea surface, subsurface and airborne electronic systems presented by offshore wind farms. To accomplish this goal, the following tasks were carried out: (1) survey electronic systems that can potentially be impacted by large offshore wind farms, and identify impact assessment studies and research and development activities both within and outside the US, (2) engage key stakeholders to identify their possible concerns and operating requirements, (3) conduct first-principle modeling on the interactions of electromagnetic signals with, and the radiation of underwater acoustic signals from, offshore wind farms to evaluate the effect of such interactions on electronic systems, and (4) provide impact assessments, recommend mitigation methods, prioritize future research directions, and disseminate project findings. This report provides a detailed description of the methodologies used to carry out the study, key findings of the study, and a list of recommendations derived based the findings

Review of existing and operable observing systems and sensors

Deliverable 1.4 is aimed at identification of existing and operable observing systems and sensors which are relevant to COMMON SENSE objectives. Report aggregates information on existing observing initiatives, programmes, systems, platforms and sensors. The Report includes: • inventory of previous and current EU funded projects. Some of the them, even if started before 2007, were aimed at activities which are relevant or in line with those stemming from MSFD in 2008. The ‘granulation’ of the contents and objectives of the projects varies from sensors development through observation methodologies to monitoring strategies, • inventory of research infrastructure in Europe. It starts from an attempt to define of Marine Research Infrastructure, as there is not a single definition of Research Infrastructure (RI) or of Marine Research Infrastructure (MRI), and there are different ways to categorise them. The chapter gives the categorization of the MRI, together with detailed description and examples of MRI – research platforms, marine data systems, research sites and laboratories with respect of four MSFD descriptors relevant to COMMON SENSE project, • two chapters on Research Programs and Infrastructure Networks; the pan-European initiatives aimed at cooperation and efficient use of infrastructural resources for marine observation and monitoring and data exchange are analysed. The detailed description of observing sensors and system are presented as well as frameworks for cooperation, • information on platforms (research vessels) available to the Project for testing developed sensors and systems. Platforms are available and operating in all three regions of interest to the project (Mediterranean, North Sea, Baltic), • annexed detailed description of two world-wide observation networks and systems. These systems are excellent examples of added value offered by integrated systems of ocean observation (from data to knowledge) and how they work in practice. Report concludes that it is seen a shortage of new classes of sensors to fulfil the emerging monitoring needs. Sensors proposed to be developed by COMMON SENSE project shall answer to the needs stemmed from introduction of MSFD and GES descriptors