A code-aided synchronization IP core for iterative channel decoders

Synchronization and channel decoding are integral parts of each receiver in wireless communication systems. The task of synchronization is the estimation of the general unknown parameters of phase, frequency and timing offset as well as correction of the received symbol sequence according to the estimated parameters. The synchronized symbol sequence serves as input for the channel decoder. Advanced channel decoders are able to operate at very low signal-to-noise ratios (SNR). For small values of SNR, the parameter estimation suffers from increased noise and impacts the communication performance. To improve the synchronization quality and thus decoder performance, the synchronizers are integrated into the iterative decoding structure. Intermediate results of the channel decoder after each iteration are used to improve the synchronization. This approach is referred to as code-aided (CA) synchronization or turbo synchronization. A number of CA synchronization algorithms have already been published but there is no publication so far on a generic hardware implementation of the CA synchronization. Therefore we present an algorithm which can be implemented efficiently in hardware and demonstrate its communication performance. Furthermore we present a high throughput, flexible, area and power efficient code-aided synchronization IP core for various satellite communication standards. The core is synthesized for 65 nm low power CMOS technology. After placement and routing the core has an area of 0.194 mm2, throughput of 207 Msymbols/s and consumes 41.4 mW at 300 MHz clock frequency. The architecture is designed in such a way that it does not affect throughput of the system

Pilot-Symbols Aided Carrier Phase Recovery for 100G PM-QPSK Digital Coherent Receivers

A feed-forward pilot-symbols aided carrier phase recovery scheme is described. The approach relies on pilot symbols that are time-division multiplexed with the transmitted data. The main advantage of the proposed solution is that of avoiding the phase ambiguity problem after a cycle slip. For homogeneous PM-QPSK transmission the proposed scheme outperforms blind carrier recovery with differential decoding

Architecture and algorithms for the implementation of digital wireless receivers in FPGA and ASIC: ISDB-T and DVB-S2 cases

[EN] The first generation of Terrestrial Digital Television(DTV) has been in service for over a decade. In 2013, several countries have already completed the transition from Analog to Digital TV Broadcasting, most of which in Europe. In South America, after several studies and trials, Brazil adopted the Japanese standard with some innovations. Japan and Brazil started Digital Terrestrial Television Broadcasting (DTTB) services in December 2003 and December 2007 respectively, using Integrated Services Digital Broadcasting - Terrestrial (ISDB-T), also known as ARIB STD-B31. In June 2005 the Committee for the Information Technology Area (CATI) of Brazilian Ministry of Science and Technology and Innovation MCTI approved the incorporation of the IC-Brazil Program, in the National Program for Microelectronics (PNM) . The main goals of IC-Brazil are the formal qualification of IC designers, support to the creation of semiconductors companies focused on projects of ICs within Brazil, and the attraction of semiconductors companies focused on the design and development of ICs in Brazil. The work presented in this thesis originated from the unique momentum created by the combination of the birth of Digital Television in Brazil and the creation of the IC-Brazil Program by the Brazilian government. Without this combination it would not have been possible to make these kind of projects in Brazil. These projects have been a long and costly journey, albeit scientifically and technologically worthy, towards a Brazilian DTV state-of-the-art low complexity Integrated Circuit, with good economy scale perspectives, due to the fact that at the beginning of this project ISDB-T standard was not adopted by several countries like DVB-T. During the development of the ISDB-T receiver proposed in this thesis, it was realized that due to the continental dimensions of Brazil, the DTTB would not be enough to cover the entire country with open DTV signal, specially for the case of remote localizations far from the high urban density regions. Then, Eldorado Research Institute and Idea! Electronic Systems, foresaw that, in a near future, there would be an open distribution system for high definition DTV over satellite, in Brazil. Based on that, it was decided by Eldorado Research Institute, that would be necessary to create a new ASIC for broadcast satellite reception. At that time DVB-S2 standard was the strongest candidate for that, and this assumption still stands nowadays. Therefore, it was decided to apply to a new round of resources funding from the MCTI - that was granted - in order to start the new project. This thesis discusses in details the Architecture and Algorithms proposed for the implementation of a low complexity Intermediate Frequency(IF) ISDB-T Receiver on Application Specific Integrated Circuit (ASIC) CMOS. The Architecture proposed here is highly based on the COordinate Rotation Digital Computer (CORDIC) Algorithm, that is a simple and efficient algorithm suitable for VLSI implementations. The receiver copes with the impairments inherent to wireless channels transmission and the receiver crystals. The thesis also discusses the Methodology adopted and presents the implementation results. The receiver performance is presented and compared to those obtained by means of simulations. Furthermore, the thesis also presents the Architecture and Algorithms for a DVB-S2 receiver targeting its ASIC implementation. However, unlike the ISDB-T receiver, only preliminary ASIC implementation results are introduced. This was mainly done in order to have an early estimation of die area to prove that the project in ASIC is economically viable, as well as to verify possible bugs in early stage. As in the case of ISDB-T receiver, this receiver is highly based on CORDIC algorithm and it was prototyped in FPGA. The Methodology used for the second receiver is derived from that used for the ISDB-T receiver, with minor additions given the project characteristics.[ES] La primera generación de Televisión Digital Terrestre(DTV) ha estado en servicio por más de una década. En 2013, varios países completaron la transición de transmisión analógica a televisión digital, la mayoría de ellas en Europa. En América del Sur, después de varios estudios y ensayos, Brasil adoptó el estándar japonés con algunas innovaciones. Japón y Brasil comenzaron a prestar el servicio de Difusión de Televisión Digital Terrestre (DTTB) en diciembre de 2003 y diciembre de 2007 respectivamente, utilizando Radiodifusión Digital de Servicios Integrados Terrestres (ISDB-T), también conocida como ARIB STD-B31. En junio de 2005, el Comité del Área de Tecnología de la Información (CATI) del Ministerio de Ciencia, Tecnología e Innovación de Brasil - MCTI aprobó la incorporación del Programa CI-Brasil, en el Programa Nacional de Microelectrónica (PNM). Los principales objetivos de la CI-Brasil son la formación de diseñadores de CIs, apoyar la creación de empresas de semiconductores enfocadas en proyectos de circuitos integrados dentro de Brasil, y la atracción de empresas de semiconductores interesadas en el diseño y desarrollo de circuitos integrados. El trabajo presentado en esta tesis se originó en el impulso único creado por la combinación del nacimiento de la televisión digital en Brasil y la creación del Programa de CI-Brasil por el gobierno brasileño. Sin esta combinación no hubiera sido posible realizar este tipo de proyectos en Brasil. Estos proyectos han sido un trayecto largo y costoso, aunque meritorio desde el punto de vista científico y tecnológico, hacia un Circuito Integrado brasileño de punta y de baja complejidad para DTV, con buenas perspectivas de economía de escala debido al hecho que al inicio de este proyecto, el estándar ISDB-T no fue adoptado por varios países como DVB-T. Durante el desarrollo del receptor ISDB-T propuesto en esta tesis, se observó que debido a las dimensiones continentales de Brasil, la DTTB no sería suficiente para cubrir todo el país con la señal de televisión digital abierta, especialmente para el caso de localizaciones remotas, apartadas de las regiones de alta densidad urbana. En ese momento, el Instituto de Investigación Eldorado e Idea! Sistemas Electrónicos, previeron que en un futuro cercano habría un sistema de distribución abierto para DTV de alta definición por satélite en Brasil. Con base en eso, el Instituto de Investigación Eldorado decidió que sería necesario crear un nuevo ASIC para la recepción de radiodifusión por satélite, basada el estándar DVB-S2. En esta tesis se analiza en detalle la Arquitectura y algoritmos propuestos para la implementación de un receptor ISDB-T de baja complejidad y frecuencia intermedia (IF) en un Circuito Integrado de Aplicación Específica (ASIC) CMOS. La arquitectura aquí propuesta se basa fuertemente en el algoritmo Computadora Digital para Rotación de Coordenadas (CORDIC), el cual es un algoritmo simple, eficiente y adecuado para implementaciones VLSI. El receptor hace frente a las deficiencias inherentes a las transmisiones por canales inalámbricos y los cristales del receptor. La tesis también analiza la metodología adoptada y presenta los resultados de la implementación. Por otro lado, la tesis también presenta la arquitectura y los algoritmos para un receptor DVB-S2 dirigido a la implementación en ASIC. Sin embargo, a diferencia del receptor ISDB-T, se introducen sólo los resultados preliminares de implementación en ASIC. Esto se hizo principalmente con el fin de tener una estimación temprana del área del die para demostrar que el proyecto en ASIC es económicamente viable, así como para verificar posibles errores en etapa temprana. Como en el caso de receptor ISDB-T, este receptor se basa fuertemente en el algoritmo CORDIC y fue un prototipado en FPGA. La metodología utilizada para el segundo receptor se deriva de la utilizada para el re[CA] La primera generació de Televisió Digital Terrestre (TDT) ha estat en servici durant més d'una dècada. En 2013, diversos països ja van completar la transició de la radiodifusió de televisió analògica a la digital, i la majoria van ser a Europa. A Amèrica del Sud, després de diversos estudis i assajos, Brasil va adoptar l'estàndard japonés amb algunes innovacions. Japó i Brasil van començar els servicis de Radiodifusió de Televisió Terrestre Digital (DTTB) al desembre de 2003 i al desembre de 2007, respectivament, utilitzant la Radiodifusió Digital amb Servicis Integrats de (ISDB-T), coneguda com a ARIB STD-B31. Al juny de 2005, el Comité de l'Àrea de Tecnologia de la Informació (CATI) del Ministeri de Ciència i Tecnologia i Innovació del Brasil (MCTI) va aprovar la incorporació del programa CI Brasil al Programa Nacional de Microelectrònica (PNM). Els principals objectius de CI Brasil són la qualificació formal dels dissenyadors de circuits integrats, el suport a la creació d'empreses de semiconductors centrades en projectes de circuits integrats dins del Brasil i l'atracció d'empreses de semiconductors centrades en el disseny i desenvolupament de circuits integrats. El treball presentat en esta tesi es va originar en l'impuls únic creat per la combinació del naixement de la televisió digital al Brasil i la creació del programa Brasil CI pel govern brasiler. Sense esta combinació no hauria estat possible realitzar este tipus de projectes a Brasil. Estos projectes han suposat un viatge llarg i costós, tot i que digne científicament i tecnològica, cap a un circuit integrat punter de baixa complexitat per a la TDT brasilera, amb bones perspectives d'economia d'escala perquè a l'inici d'este projecte l'estàndard ISDB-T no va ser adoptat per diversos països, com el DVB-T. Durant el desenvolupament del receptor de ISDB-T proposat en esta tesi, va resultar que, a causa de les dimensions continentals de Brasil, la DTTB no seria suficient per cobrir tot el país amb el senyal de TDT oberta, especialment pel que fa a les localitzacions remotes allunyades de les regions d'alta densitat urbana.. En este moment, l'Institut de Recerca Eldorado i Idea! Sistemes Electrònics van preveure que, en un futur pròxim, no hi hauria a Brasil un sistema de distribució oberta de TDT d'alta definició a través de satèl¿lit. D'acord amb això, l'Institut de Recerca Eldorado va decidir que seria necessari crear un nou ASIC per a la recepció de radiodifusió per satèl¿lit. basat en l'estàndard DVB-S2. En esta tesi s'analitza en detall l'arquitectura i els algorismes proposats per l'execució d'un receptor ISDB-T de Freqüència Intermèdia (FI) de baixa complexitat sobre CMOS de Circuit Integrat d'Aplicacions Específiques (ASIC). L'arquitectura ací proposada es basa molt en l'algorisme de l'Ordinador Digital de Rotació de Coordenades (CORDIC), que és un algorisme simple i eficient adequat per implementacions VLSI. El receptor fa front a les deficiències inherents a la transmissió de canals sense fil i els cristalls del receptor. Esta tesi també analitza la metodologia adoptada i presenta els resultats de l'execució. Es presenta el rendiment del receptor i es compara amb els obtinguts per mitjà de simulacions. D'altra banda, esta tesi també presenta l'arquitectura i els algorismes d'un receptor de DVB-S2 de cara a la seua implementació en ASIC. No obstant això, a diferència del receptor ISDB-T, només s'introdueixen resultats preliminars d'implementació en ASIC. Això es va fer principalment amb la finalitat de tenir una estimació primerenca de la zona de dau per demostrar que el projecte en ASIC és econòmicament viable, així com per verificar possibles errors en l'etapa primerenca. Com en el cas del receptor ISDB-T, este receptor es basa molt en l'algorisme CORDIC i va ser un prototip de FPGA. La metodologia utilitzada per al segon receptor es deriva de la utilitzada per al receptor IRodrigues De Lima, E. (2016). Architecture and algorithms for the implementation of digital wireless receivers in FPGA and ASIC: ISDB-T and DVB-S2 cases [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/61967TESI

Robust synchronization for PSK (DVB-S2) and OFDM systems

The advent of high data rate (broadband) applications and user mobility into modern wireless communications presents new challenges for synchronization in digital receivers. These include low operating signal-to-noise ratios, wideband channel effects, Doppler effects and local oscillator instabilities. In this thesis, we investigate robust synchronization for DVB-S2 (Digital Video Broadcasting via Satellite) and OFDM (Orthogonal Frequency Division Multiplexing) systems, as these technologies are well-suited for the provision of broadband services in the satellite and terrestrial channels respectively.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

DVBS2X standard FPGA implementation of LLR, physical layer de-scrambling and symbol timing synchronization (STR) blocks for satellite applications

Trabalho de Conclusão de Curso (graduação)—Universidade de Brasília, Faculdade UnB Gama, 2019.Dentre o paradigma da comunicação digital, existe o contexto de rádio definido por software, que pode trazer muitas vantages sobre os modelos de radio classicos não reconfiguráveis, por exemplo, o aumento na flexibilidade, que como consequencia traz uma maior facilidade em manutenção e conteção de erros de projeto. Uma estrutura que adiciona à morfologia se aplicando em um conjunto volumoso de contextos e mostrando características unicas de aplicação são os chips field programmable gate array (FPGA). Neste texto foram projetados três blocos do protocolo de comunicação DVBS2X para um SDR em que a aplicação principal é a comunicação por satélite em banda Ku. Os blocos são: Symbol timing synchronization, que lida com a correspondência o tempo de amostragem entre o sinal em quadratura transmitido e o recebido, baseando-se em um algoritmo closed loop non data-aided Gardner Timing Error Detection. O bloco Log Likelihood Ratio, que é um detector maximum à posteriori que estima o símbolo transmitido baseando-se nos símbolos recebidos corrompidos pelo canal AWGN. Symbol Physical Layer De-scrambling, que faz a operação oposto do bloco textitPhysical Layer Scrambling definido para o transmissor pelo padrão DVBS2Xm multiplicando o símbolo recebido por um número complexo definido por uma golden sequence, implemenetando dois linear feedback shift registers na FPGA. Os resultados foram favoráveis com arquiteturas de hardware escolhidas e projetadas, cada bloco foi projetado com uma metodologia Top-down e validado com arquivos vetores codificados em linguagem de alto nível como PYTHON e MATLAB. Este texto propôs e implementou três soluções em hardware viáveis com complexidade de implementação razoáveis, baseando-se sempre no protocol padrão e comparando com outros exemplos da literatura acadêmica.Within the paradigm of digital communication, there exist the context of software-defined radios, in which many advantages can be found over classical non-reconfigurable radios, for example, the rise in flexibility, that as consequence causes ease in maintenance and project error repair. A structure that adds to this scheme applying itself in a plethora of contexts and showing unique application characteristics is the Field Programmable Gate Array (FPGA) chips. In this text, it was projected three blocks from the DVBS2X standard for an SDR with the main application objective being satellite communication in Ku band. The blocks are: Symbol timing synchronization, that deals with the matching between the transmitted quadrature waveform sampling time and the receiver sampling time, based on a close-loop non-data aided Gardner Timing Error Detection algorithm. Log Likelihood Ratio block, that is a maximum à posteriori symbol estimator based on the received symbols corrupted by the AWGN channel. Symbol Physical Layer Descrambling, that makes the opposite operation from the Physical Layer descrambling defined for the transmitter in the DVBS2X protocol, multiplying the received symbol by a complex number defined with a golden sequence, implemented with two linear feedback shift registers in FPGA. The results were favorable with hardware architectures chosen and projected, each block was design with a Top-down design methodology and validated with vector files coded in high-level languages such as PYTHON and MATLAB. This text proposed and implemented three hardware solutions with synthesizable hardware complexity, based on the DVBS2X standard

Solutions for New Terrestrial Broadcasting Systems Offering Simultaneously Stationary and Mobile Services

221 p.[EN]Since the first broadcasted TV signal was transmitted in the early decades of the past century, the television broadcasting industry has experienced a series of dramatic changes. Most recently, following the evolution from analogue to digital systems, the digital dividend has become one of the main concerns of the broadcasting industry. In fact, there are many international spectrum authorities reclaiming part of the broadcasting spectrum to satisfy the growing demand of other services, such as broadband wireless services, arguing that the TV services are not very spectrum-efficient. Apart from that, it must be taken into account that, even if up to now the mobile broadcasting has not been considered a major requirement, this will probably change in the near future. In fact, it is expected that the global mobile data traffic will increase 11-fold between 2014 and 2018, and what is more, over two thirds of the data traffic will be video stream by the end of that period. Therefore, the capability to receive HD services anywhere with a mobile device is going to be a mandatory requirement for any new generation broadcasting system. The main objective of this work is to present several technical solutions that answer to these challenges. In particular, the main questions to be solved are the spectrum efficiency issue and the increasing user expectations of receiving high quality mobile services. In other words, the main objective is to provide technical solutions for an efficient and flexible usage of the terrestrial broadcasting spectrum for both stationary and mobile services. The first contributions of this scientific work are closely related to the study of the mobile broadcast reception. Firstly, a comprehensive mathematical analysis of the OFDM signal behaviour over time-varying channels is presented. In order to maximize the channel capacity in mobile environments, channel estimation and equalization are studied in depth. First, the most implemented equalization solutions in time-varying scenarios are analyzed, and then, based on these existing techniques, a new equalization algorithm is proposed for enhancing the receivers’ performance. An alternative solution for improving the efficiency under mobile channel conditions is treating the Inter Carrier Interference as another noise source. Specifically, after analyzing the ICI impact and the existing solutions for reducing the ICI penalty, a new approach based on the robustness of FEC codes is presented. This new approach employs one dimensional algorithms at the receiver and entrusts the ICI removing task to the robust forward error correction codes. Finally, another major contribution of this work is the presentation of the Layer Division Multiplexing (LDM) as a spectrum-efficient and flexible solution for offering stationary and mobile services simultaneously. The comprehensive theoretical study developed here verifies the improved spectrum efficiency, whereas the included practical validation confirms the feasibility of the system and presents it as a very promising multiplexing technique, which will surely be a strong candidate for the next generation broadcasting services.[ES]Desde el comienzo de la transmisión de las primeras señales de televisión a principios del siglo pasado, la radiodifusión digital ha evolucionado gracias a una serie de cambios relevantes. Recientemente, como consecuencia directa de la digitalización del servicio, el dividendo digital se ha convertido en uno de los caballos de batalla de la industria de la radiodifusión. De hecho, no son pocos los consorcios internacionales que abogan por asignar parte del espectro de radiodifusión a otros servicios como, por ejemplo, la telefonía móvil, argumentado la poca eficiencia espectral de la tecnología de radiodifusión actual. Asimismo, se debe tener en cuenta que a pesar de que los servicios móviles no se han considerado fundamentales en el pasado, esta tendencia probablemente variará en el futuro cercano. De hecho, se espera que el tráfico derivado de servicios móviles se multiplique por once entre los años 2014 y 2018; y lo que es más importante, se pronostica que dos tercios del tráfico móvil sea video streaming para finales de ese periodo. Por lo tanto, la posibilidad de ofrecer servicios de alta definición en dispositivos móviles es un requisito fundamental para los sistemas de radiodifusión de nueva generación. El principal objetivo de este trabajo es presentar soluciones técnicas que den respuesta a los retos planteados anteriormente. En particular, las principales cuestiones a resolver son la ineficiencia espectral y el incremento de usuarios que demandan mayor calidad en los contenidos para dispositivos móviles. En pocas palabras, el principal objetivo de este trabajo se basa en ofrecer una solución más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. La primera contribución relevante de este trabajo está relacionada con la recepción de la señal de televisión en movimiento. En primer lugar, se presenta un completo análisis matemático del comportamiento de la señal OFDM en canales variantes con el tiempo. A continuación, con la intención de maximizar la capacidad del canal, se estudian en profundidad los algoritmos de estimación y ecualización. Posteriormente, se analizan los algoritmos de ecualización más implementados, y por último, basándose en estas técnicas, se propone un nuevo algoritmo de ecualización para aumentar el rendimiento de los receptores en tales condiciones. Del mismo modo, se plantea un nuevo enfoque para mejorar la eficiencia de los servicios móviles basado en tratar la interferencia entre portadoras como una fuente de ruido. Concretamente, tras analizar el impacto del ICI en los receptores actuales, se sugiere delegar el trabajo de corrección de dichas distorsiones en códigos FEC muy robustos. Finalmente, la última contribución importante de este trabajo es la presentación de la tecnología LDM como una manera más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. El análisis teórico presentado confirma el incremento en la eficiencia espectral, mientras que el estudio práctico valida la posible implementación del sistema y presenta la tecnología LDM c

Economically sustainable public security and emergency network exploiting a broadband communications satellite

The research contributes to work in Rapid Deployment of a National Public Security and Emergency Communications Network using Communication Satellite Broadband. Although studies in Public Security Communication networks have examined the use of communications satellite as an integral part of the Communication Infrastructure, there has not been an in-depth design analysis of an optimized regional broadband-based communication satellite in relation to the envisaged service coverage area, with little or no terrestrial last-mile telecommunications infrastructure for delivery of satellite solutions, applications and services. As such, the research provides a case study of a Nigerian Public Safety Security Communications Pilot project deployed in regions of the African continent with inadequate terrestrial last mile infrastructure and thus requiring a robust regional Communications Satellite complemented with variants of terrestrial wireless technologies to bridge the digital hiatus as a short and medium term measure apart from other strategic needs. The research not only addresses the pivotal role of a secured integrated communications Public safety network for security agencies and emergency service organizations with its potential to foster efficient information symmetry amongst their operations including during emergency and crisis management in a timely manner but demonstrates a working model of how analogue spectrum meant for Push-to-Talk (PTT) services can be re-farmed and digitalized as a “dedicated” broadband-based public communications system. The network’s sustainability can be secured by using excess capacity for the strategic commercial telecommunication needs of the state and its citizens. Utilization of scarce spectrum has been deployed for Nigeria’s Cashless policy pilot project for financial and digital inclusion. This effectively drives the universal access goals, without exclusivity, in a continent, which still remains the least wired in the world

Near Optimum Low Complexity Smoothing Loops for Dynamical Phase Estimation—Application to BPSK Modulated Signals

International audience—This correspondence provides and analyzes a low complexity, near optimum, fixed-interval smoothing algorithm that approaches the performance of an optimal smoother for the price of two low complexity sequential estimators, i.e., two phase-locked loops (PLLs). Based on a linear approximation of the problem, a theoretical performance evaluation is given. The theoretical results are compared to some simulation results and to the Bayesian and hybrid Cramér–Rao bounds. They illustrate the good performance of the proposed smoothing PLL (S-PLL) algorithm. Index Terms—Dynamical phase estimation, phase-locked loop (PLL), smoothing algorithm

Design of a medium access protocol and scheduling algorithm for multimedia traffic over a DVB-RCS satellite link using a cross-layer approach.

Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2010.Satellite networks provide an alternative to terrestrial networks where cost and lack of infrastructure are driving parameters. For a satellite network to be cost effective one needs to be able to increase the efficiency of the network: this is accomplished by focusing on the parameters that affect the performance of the system and improving on them where possible. The factors affecting the network performance include the capacity, the propagation delay, the protocol used, and the channel error rate, among others. There are various ways to implement a satellite network depending on the satellite orbit, the architecture used, the access technique used, the radio interfaces used, etc. This thesis work describes the chosen satellite standard, Digital Video Broadcasting – Return Channel via Satellite (DVB-RCS) and the associated Medium Access Control (MAC) protocols. Two protocols were designed and investigated under ideal channel conditions, these being the Combined Free/Demand Assigned Multiple Access with Piggy Backing – Packet Dropping (CF/DAMA-PB-PD) protocol; and the Combined Free/Demand Assigned Multiple Access with Piggy Backing – Prioritised Earliest Deadline First (CF/DAMA-PB-PEDF) protocol, both derived from the Combined Free/Demand Assigned Multiple Access with Piggy Backing (CF/DAMA-PB) protocol. The multimedia traffic models for voice, video and web classes are described, validated through simulations and presented; these provide the heterogeneous vi traffic required for evaluating the performance of the satellite system implemented and the designed protocols. Under the multimedia traffic, CF/DAMA-PB-PD was shown to excel in average packet delay reduction while reducing the overall system throughput. The CF/DAMA-PB-PEDF does not contribute to an improvement over the CF/DAMA-PB-PD protocol. The effects of a non-ideal channel on the CF/DAMA-PB-PD protocol was investigated and presented along with the design of three MAC protocols that take the channel characteristics into account to improve on the system performance. The cross-layer interactions, more specifically the interaction between the physical and data–link layers, were used, investigated and presented. The channel state information in terms of signal-to-noise ratio (SNR) was used to improve the system performance. The five protocols evaluated under non-ideal channel conditions were the CF/DAMA-PB, CF/DAMA-PB-PD, CF/DAMA-PB-BSNRF, CF/DAMA-PB-DD and the CF/DAMA-PB-BSNRF+DD. The best overall performance, both in average packet delay while maintaining good QoS levels and throughput was shown to be that of the CF/DAMA-PB-DD protocol