5,292 research outputs found
Efficient and Fast Current Curve Estimation of CMOS Digital Circuits at the Logic Level
This contribution presents a method to obtain current estimations
at the logic level. This method uses a simple current model and
a current curve generation algorithm that is implemented as an attached
module to a logic simulator under development called HALOTIS. The
implementation is aimed at efficiency and overall estimations, making
it suitable to switching noise evaluation and current peaks localisation.
Simulation results and comparison to HSPICE confirm the usefulness
and efficiency of the approach.Ministerio de Ciencia y TecnologĂa MODEL project TIC 2000-1350Ministerio de Ciencia y TecnologĂa VERDI project TIC 2002-228
Behavioral modeling of digital IC input and output ports
This paper addresses the development of accurate and efficient behavioral models of digital integrated circuit input and output ports for signal integrity simulations and timing analyses. The modeling process is described and applied to the characterization of actual device
On the Behavioral Modeling of Integrated Circuit Output Buffers
The properties of common behavioral macromodels for single ended CMOS integrated circuits output buffers are discussed with the aim of providing criteria for an effective use of possible modeling options
Motion estimation and CABAC VLSI co-processors for real-time high-quality H.264/AVC video coding
Real-time and high-quality video coding is gaining a wide interest in the research and industrial community for different applications. H.264/AVC, a recent standard for high performance video coding, can be successfully exploited in several scenarios including digital video broadcasting, high-definition TV and DVD-based systems, which require to sustain up to tens of Mbits/s. To that purpose this paper proposes optimized architectures for H.264/AVC most critical tasks, Motion estimation and context adaptive binary arithmetic coding. Post synthesis results on sub-micron CMOS standard-cells technologies show that the proposed architectures can actually process in real-time 720 Ă— 480 video sequences at 30 frames/s and grant more than 50 Mbits/s. The achieved circuit complexity and power consumption budgets are suitable for their integration in complex VLSI multimedia systems based either on AHB bus centric on-chip communication system or on novel Network-on-Chip (NoC) infrastructures for MPSoC (Multi-Processor System on Chip
Dynamic Power Management for Neuromorphic Many-Core Systems
This work presents a dynamic power management architecture for neuromorphic
many core systems such as SpiNNaker. A fast dynamic voltage and frequency
scaling (DVFS) technique is presented which allows the processing elements (PE)
to change their supply voltage and clock frequency individually and
autonomously within less than 100 ns. This is employed by the neuromorphic
simulation software flow, which defines the performance level (PL) of the PE
based on the actual workload within each simulation cycle. A test chip in 28 nm
SLP CMOS technology has been implemented. It includes 4 PEs which can be scaled
from 0.7 V to 1.0 V with frequencies from 125 MHz to 500 MHz at three distinct
PLs. By measurement of three neuromorphic benchmarks it is shown that the total
PE power consumption can be reduced by 75%, with 80% baseline power reduction
and a 50% reduction of energy per neuron and synapse computation, all while
maintaining temporary peak system performance to achieve biological real-time
operation of the system. A numerical model of this power management model is
derived which allows DVFS architecture exploration for neuromorphics. The
proposed technique is to be used for the second generation SpiNNaker
neuromorphic many core system
Recommended from our members
Per-Core DVFS with Switched-Capacitor Converters for Energy Efficiency in Manycore Processors
Integrating multiple power converters on-chip improves energy efficiency of manycore architectures. Switched-capacitor (SC) dc-dc converters are compatible with conventional CMOS processes, but traditional implementations suffer from limited conversion efficiency. We propose a dynamic voltage and frequency scaling scheme with SC converters that achieves high converter efficiency by allowing the output voltage to ripple and having the processor core frequency track the ripple. Minimum core energy is achieved by hopping between different converter modes and tuning body-bias voltages. A multicore processor model based on a 28-nm technology shows conversion efficiencies of 90% along with over 25% improvement in the overall chip energy efficiency
Techniques of Energy-Efficient VLSI Chip Design for High-Performance Computing
How to implement quality computing with the limited power budget is the key factor to move very large scale integration (VLSI) chip design forward. This work introduces various techniques of low power VLSI design used for state of art computing. From the viewpoint of power supply, conventional in-chip voltage regulators based on analog blocks bring the large overhead of both power and area to computational chips. Motivated by this, a digital based switchable pin method to dynamically regulate power at low circuit cost has been proposed to make computing to be executed with a stable voltage supply. For one of the widely used and time consuming arithmetic units, multiplier, its operation in logarithmic domain shows an advantageous performance compared to that in binary domain considering computation latency, power and area. However, the introduced conversion error reduces the reliability of the following computation (e.g. multiplication and division.). In this work, a fast calibration method suppressing the conversion error and its VLSI implementation are proposed. The proposed logarithmic converter can be supplied by dc power to achieve fast conversion and clocked power to reduce the power dissipated during conversion. Going out of traditional computation methods and widely used static logic, neuron-like cell is also studied in this work. Using multiple input floating gate (MIFG) metal-oxide semiconductor field-effect transistor (MOSFET) based logic, a 32-bit, 16-operation arithmetic logic unit (ALU) with zipped decoding and a feedback loop is designed. The proposed ALU can reduce the switching power and has a strong driven-in capability due to coupling capacitors compared to static logic based ALU. Besides, recent neural computations bring serious challenges to digital VLSI implementation due to overload matrix multiplications and non-linear functions. An analog VLSI design which is compatible to external digital environment is proposed for the network of long short-term memory (LSTM). The entire analog based network computes much faster and has higher energy efficiency than the digital one
- …