29,005 research outputs found
A survey on subjecting electronic product code and non-ID objects to IP identification
Over the last decade, both research on the Internet of Things (IoT) and
real-world IoT applications have grown exponentially. The IoT provides us with
smarter cities, intelligent homes, and generally more comfortable lives.
However, the introduction of these devices has led to several new challenges
that must be addressed. One of the critical challenges facing interacting with
IoT devices is to address billions of devices (things) around the world,
including computers, tablets, smartphones, wearable devices, sensors, and
embedded computers, and so on. This article provides a survey on subjecting
Electronic Product Code and non-ID objects to IP identification for IoT
devices, including their advantages and disadvantages thereof. Different
metrics are here proposed and used for evaluating these methods. In particular,
the main methods are evaluated in terms of their: (i) computational overhead,
(ii) scalability, (iii) adaptability, (iv) implementation cost, and (v) whether
applicable to already ID-based objects and presented in tabular format.
Finally, the article proves that this field of research will still be ongoing,
but any new technique must favorably offer the mentioned five evaluative
parameters.Comment: 112 references, 8 figures, 6 tables, Journal of Engineering Reports,
Wiley, 2020 (Open Access
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
D2D-Based Grouped Random Access to Mitigate Mobile Access Congestion in 5G Sensor Networks
The Fifth Generation (5G) wireless service of sensor networks involves
significant challenges when dealing with the coordination of ever-increasing
number of devices accessing shared resources. This has drawn major interest
from the research community as many existing works focus on the radio access
network congestion control to efficiently manage resources in the context of
device-to-device (D2D) interaction in huge sensor networks. In this context,
this paper pioneers a study on the impact of D2D link reliability in
group-assisted random access protocols, by shedding the light on beneficial
performance and potential limitations of approaches of this kind against
tunable parameters such as group size, number of sensors and reliability of D2D
links. Additionally, we leverage on the association with a Geolocation Database
(GDB) capability to assist the grouping decisions by drawing parallels with
recent regulatory-driven initiatives around GDBs and arguing benefits of the
suggested proposal. Finally, the proposed method is approved to significantly
reduce the delay over random access channels, by means of an exhaustive
simulation campaign.Comment: First submission to IEEE Communications Magazine on Oct.28.2017.
Accepted on Aug.18.2019. This is the camera-ready versio
Managed ecosystems of networked objects
Small embedded devices such as sensors and actuators will become the cornerstone of the Future Internet. To this end, generic, open and secure communication and service platforms are needed in order to be able to exploit the new business opportunities these devices bring. In this paper, we evaluate the current efforts to integrate sensors and actuators into the Internet and identify the limitations at the level of cooperation of these Internet-connected objects and the possible intelligence at the end points. As a solution, we propose the concept of Managed Ecosystem of Networked Objects, which aims to create a smart network architecture for groups of Internet-connected objects by combining network virtualization and clean-slate end-to-end protocol design. The concept maps to many real-life scenarios and should empower application developers to use sensor data in an easy and natural way. At the same time, the concept introduces many new challenging research problems, but their realization could offer a meaningful contribution to the realization of the Internet of Things
A comprehensive survey of wireless body area networks on PHY, MAC, and network layers solutions
Recent advances in microelectronics and integrated circuits, system-on-chip design, wireless communication and intelligent low-power sensors have allowed the realization of a Wireless Body Area Network (WBAN). A WBAN is a collection of low-power, miniaturized, invasive/non-invasive lightweight wireless sensor nodes that monitor the human body functions and the surrounding environment. In addition, it supports a number of innovative and interesting applications such as ubiquitous healthcare, entertainment, interactive gaming, and military applications. In this paper, the fundamental mechanisms of WBAN including architecture and topology, wireless implant communication, low-power Medium Access Control (MAC) and routing protocols are reviewed. A comprehensive study of the proposed technologies for WBAN at Physical (PHY), MAC, and Network layers is presented and many useful solutions are discussed for each layer. Finally, numerous WBAN applications are highlighted
M-GEAR: Gateway-Based Energy-Aware Multi-Hop Routing Protocol for WSNs
In this research work, we advise gateway based energy-efficient routing
protocol (M-GEAR) for Wireless Sensor Networks (WSNs). We divide the sensor
nodes into four logical regions on the basis of their location in the sensing
field. We install Base Station (BS) out of the sensing area and a gateway node
at the centre of the sensing area. If the distance of a sensor node from BS or
gateway is less than predefined distance threshold, the node uses direct
communication. We divide the rest of nodes into two equal regions whose
distance is beyond the threshold distance. We select cluster heads (CHs)in each
region which are independent of the other region. These CHs are selected on the
basis of a probability. We compare performance of our protocol with LEACH (Low
Energy Adaptive Clustering Hierarchy). Performance analysis and compared
statistic results show that our proposed protocol perform well in terms of
energy consumption and network lifetime.Comment: IEEE 8th International Conference on Broadband and Wireless
Computing, Communication and Applications (BWCCA'13), Compiegne, Franc
Architecture for Mobile Heterogeneous Multi Domain Networks
Multi domain networks can be used in several scenarios including military, enterprize networks, emergency networks and many other cases. In such networks, each domain might be under its own administration. Therefore, the cooperation among domains is conditioned by individual domain policies regarding sharing information, such as network topology, connectivity, mobility, security, various service availability and so on. We propose a new architecture for Heterogeneous Multi Domain (HMD) networks, in which one the operations are subject to specific domain policies. We propose a hierarchical architecture, with an infrastructure of gateways at highest-control level that enables policy based interconnection, mobility and other services among domains. Gateways are responsible for translation among different communication protocols, including routing, signalling, and security. Besides the architecture, we discuss in more details the mobility and adaptive capacity of services in HMD. We discuss the HMD scalability and other advantages compared to existing architectural and mobility solutions. Furthermore, we analyze the dynamic availability at the control level of the hierarchy
- …