Manufacturability Aware Design.

The aim of this work is to provide solutions that optimize the tradeoffs among design, manufacturability, and cost of ownership posed by technology scaling and sub-wavelength lithography. These solutions may take the form of robust circuit designs, cost-effective resolution technologies, accurate modeling considering process variations, and design rules assessment. We first establish a framework for assessing the impact of process variation on circuit performance, product value and return on investment on alternative processes. Key features include comprehensive modeling and different handling on die-to-die and within-die variation, accurate models of correlations of variation, realistic and quantified projection to future process nodes, and performance sensitivity analysis to improved control of individual device parameter and variation sources. Then we describe a novel minimum cost of correction methodology which determines the level of correction of each layout feature such that the prescribed parametric yield is attained with minimum RET (Resolution Enhancement Technology) cost. This timing driven OPC (Optical Proximity Correction) insertion flow uses a mathematical programming based slack budgeting algorithm to determine OPC level for all polysilicon gate geometries. Designs adopting this methodology show up to 20% MEBES (Manufacturing Electron Beam Exposure System) data volume reduction and 39% OPC runtime improvement. When the systematic correction residual errors become unavoidable, we analyze their impact on a state-of-art microprocessor's speedpath skew. A platform is created for diagnosing and improving OPC quality on gates with specific functionality such as critical gates or matching transistors. Significant changes in full-chip timing analysis indicate the necessity of a post-OPC performance verification design flow. Finally, we quantify the performance, manufacturability and mask cost impact of globally applying several common restrictive design rules. Novel approaches such as locally adapting FDRs (flexible design rules) based on image parameters range, and DRC Plus (preferred design rule enforcement with 2D pattern matching) are also described.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/57676/2/jiey_1.pd

Performance-Based Optical Proximity Correction

Ph.DDOCTOR OF PHILOSOPH

Electrical Design for Manufacturability Solutions: Fast Systematic Variation Analysis and Design Enhancement Techniques

The primary objectives in this research are to develop computer-aided design (CAD) tools for Design for Manufacturability (DFM) solutions that enable designers to conduct more rapid and more accurate systematic variation analysis, with different design enhancement techniques. Four main CAD tools are developed throughout my thesis. The first CAD tool facilitates a quantitative study of the impact of systematic variations for different circuits' electrical and geometrical behavior. This is accomplished by automatically performing an extensive analysis of different process variations (lithography and stress) and their dependency on the design context. Such a tool helps to explore and evaluate the systematic variation impact on any type of design. Secondly, solutions in the industry focus on the "design and then fix philosophy", or "fix during design philosophy", whereas the next CAD tool involves the "fix before design philosophy". Here, the standard cell library is characterized in different design contexts, different resolution enhancement techniques, and different process conditions, generating a fully DFM-aware standard cell library using a newly developed methodology that dramatically reduce the required number of silicon simulations. Several experiments are conducted on 65nm and 45nm designs, and demonstrate more robust and manufacturable designs that can be implemented by using the DFM-aware standard cell library. Thirdly, a novel electrical-aware hotspot detection solution is developed by using a device parameter-based matching technique since the state-of-the-art hotspot detection solutions are all geometrical based. This CAD tool proposes a new philosophy by detecting yield limiters, also known as hotspots, through the model parameters of the device, presented in the SPICE netlist. This novel hotspot detection methodology is tested and delivers extraordinary fast and accurate results. Finally, the existing DFM solutions, mainly address the digital designs. Process variations play an increasingly important role in the success of analog circuits. Knowledge of the parameter variances and their contribution patterns is crucial for a successful design process. This information is valuable to find solutions for many problems in design, design automation, testing, and fault tolerance. The fourth CAD solution, proposed in this thesis, introduces a variability-aware DFM solution that detects, analyze, and automatically correct hotspots for analog circuits

FOCSI: A new layout regularity metric

Technical ReportDigital CMOS Integrated Circuits (ICs) suffer from serious layout features printability issues associated to the lithography manufacturing process. Regular layout designs are emerging as alternative solutions to reduce these ICs systematic subwavelength lithography failures. However, there is no metric to evaluate and compare the layout regularity of those regular designs. In this paper we propose a new layout regularity metric called Fixed Origin Corner Square Inspection (FOCSI). FOCSI allows the comparison and quantification of designs in terms of regularity and for any given degree of granularity. When FOCSI is oriented to the evaluation of regularity while applying Lithography Enhancement Techniques, it comprehends layout layers measurements considering the optical interaction length and combines them to obtain the complete layout regularity measure. Examples are provided for 32-bit adders in the 90 nm technology node for the Standard Cell approach and for Via-Configurable Transistor Array regular designs. We show how layouts can be sorted accurately even if their degree of regularity is similar.Preprin

Layout regularity metric as a fast indicator of process variations

Integrated circuits design faces increasing challenge as we scale down due to the increase of the effect of sensitivity to process variations. Systematic variations induced by different steps in the lithography process affect both parametric and functional yields of the designs. These variations are known, themselves, to be affected by layout topologies. Design for Manufacturability (DFM) aims at defining techniques that mitigate variations and improve yield. Layout regularity is one of the trending techniques suggested by DFM to mitigate process variations effect. There are several solutions to create regular designs, like restricted design rules and regular fabrics. These regular solutions raised the need for a regularity metric. Metrics in literature are insufficient for different reasons; either because they are qualitative or computationally intensive. Furthermore, there is no study relating either lithography or electrical variations to layout regularity. In this work, layout regularity is studied in details and a new geometrical-based layout regularity metric is derived. This metric is verified against lithographic simulations and shows good correlation. Calculation of the metric takes only few minutes on 1mm x 1mm design, which is considered fast compared to the time taken by simulations. This makes it a good candidate for pre-processing the layout data and selecting certain areas of interest for lithographic simulations for faster throughput. The layout regularity metric is also compared against a model that measures electrical variations due to systematic lithographic variations. The validity of using the regularity metric to flag circuits that have high variability using the developed electrical variations model is shown. The regularity metric results compared to the electrical variability model results show matching percentage that can reach 80%, which means that this metric can be used as a fast indicator of designs more susceptible to lithography and hence electrical variations

Design Techniques for Lithography-Friendly Nanometer CMOS Integrated Circuits

The Integrated Circuits industry has been a major driver of the outstanding changes and improvements in the modern day technology and life style that we are observing in our day to day life. The continuous scaling of CMOS technology has been one of the major challenges and success stories. However, as the CMOS technology advances deeply into the deep sub-micron technology nodes, the whole industry (both manufacturing and design) is starting to face new challenges. One major challenge is the control of the variation in device parameters. Lithography variations result from the industry incapability to come up with new light sources with a smaller wavelength than ArF source (193 nm wavelength). In this research, we develop better understanding of the photo-lithography variations and their effect on how the design gets patterned. We investigate the state-of-the-art mask correction and design manipulation techniques. We are focusing in our study on the different Optical Proximity Correction (OPC) and design retargeting techniques to assess how we can improve both the functional and parametric yield. Our goal is to achieve a fast and accurate Model Based Re-Targeting (MBRT) technique that can achieve a better functional yield during manufacturing by establishing the techniques to produce more lithography-friendly targets. Moreover, it can be easily integrated into a fab's PDK (due to its relatively high speed) to feedback the exact final printing on wafer to the designers during the early design phase. In this thesis, we focus on two main topics. First is the development of a fast technique that can predict the final mask shape with reasonable accuracy. This is our proposed Model-based Initial Bias (MIB) methodology, in which we develop the full methodology for creating compact models that can predict the perturbation needed to get to an OPC initial condition that is much closer to the final solution. This is very useful in general in the OPC domain, where it can save almost 50% of the OPC runtime. We also use MIB in our proposed Model-Based Retargeting (MBRT) flow to accurately compute lithography hot-spots location and severity. Second, we develop the fast model-based retargeting methodology that is capable of fixing lithography hot spots and improving the functional yield. Moreover, in this methodology we introduce to the first time the concept of distributed retargeting. In distributed MBRT, not only the design portion that is suffering from the hot-spot is moving to get it fixed but also the surrounding designs and design fragments also contribute to the hot-spot fix. Our proposed model-based retargeting methodology also includes the multiple-patterning awareness as well as the electrical-connectivity-awareness (via-awareness). We used Mentor Graphics Calibre Litho-API c-based programing to develop all of the methodologies we explain in this thesis and tested it on 20nm and 10nm nodes

Regular cell design approach considering lithography-induced process variations

The deployment delays for EUVL, forces IC design to continue using 193nm wavelength lithography with innovative and costly techniques in order to faithfully print sub-wavelength features and combat lithography induced process variations. The effect of the lithography gap in current and upcoming technologies is to cause severe distortions due to optical diffraction in the printed patterns and thus degrading manufacturing yield. Therefore, a paradigm shift in layout design is mandatory towards more regular litho-friendly cell designs in order to improve line pattern resolution. However, it is still unclear the amount of layout regularity that can be introduced and how to measure the benefits and weaknesses of regular layouts. This dissertation is focused on searching the degree of layout regularity necessary to combat lithography variability and outperform the layout quality of a design. The main contributions that have been addressed to accomplish this objective are: (1) the definition of several layout design guidelines to mitigate lithography variability; (2) the proposal of a parametric yield estimation model to evaluate the lithography impact on layout design; (3) the development of a global Layout Quality Metric (LQM) including a Regularity Metric (RM) to capture the degree of layout regularity of a layout implementation and; (4) the creation of different layout architectures exploiting the benefits of layout regularity to outperform line-pattern resolution, referred as Adaptive Lithography Aware Regular Cell Designs (ALARCs). The first part of this thesis provides several regular layout design guidelines derived from lithography simulations so that several important lithography related variation sources are minimized. Moreover, a design level methodology, referred as gate biasing, is proposed to overcome systematic layout dependent variations, across-field variations and the non-rectilinear gate effect (NRG) applied to regular fabrics by properly configuring the drawn transistor channel length. The second part of this dissertation proposes a lithography yield estimation model to predict the amount of lithography distortion expected in a printed layout due to lithography hotspots with a reduced set of lithography simulations. An efficient lithography hotspot framework to identify the different layout pattern configurations, simplify them to ease the pattern analysis and classify them according to the lithography degradation predicted using lithography simulations is presented. The yield model is calibrated with delay measurements of a reduced set of identical test circuits implemented in a CMOS 40nm technology and thus actual silicon data is utilized to obtain a more realistic yield estimation. The third part of this thesis presents a configurable Layout Quality Metric (LQM) that considering several layout aspects provides a global evaluation of a layout design with a single score. The LQM can be leveraged by assigning different weights to each evaluation metric or by modifying the parameters under analysis. The LQM is here configured following two different set of partial metrics. Note that the LQM provides a regularity metric (RM) in order to capture the degree of layout regularity applied in a layout design. Lastly, this thesis presents different ALARC designs for a 40nm technology using different degrees of layout regularity and different area overheads. The quality of the gridded regular templates is demonstrated by automatically creating a library containing 266 cells including combinational and sequential cells and synthesizing several ITC'99 benchmark circuits. Note that the regular cell libraries only presents a 9\% area penalty compared to the 2D standard cell designs used for comparison and thus providing area competitive designs. The layout evaluation of benchmark circuits considering the LQM shows that regular layouts can outperform other 2D standard cell designs depending on the layout implementation.Los continuos retrasos en la implementación de la EUVL, fuerzan que el diseño de IC se realice mediante litografía de longitud de onda de 193 nm con innovadoras y costosas técnicas para poder combatir variaciones de proceso de litografía. La gran diferencia entre la longitud de onda y el tamaño de los patrones causa severas distorsiones debido a la difracción óptica en los patrones impresos y por lo tanto degradando el yield. En consecuencia, es necesario realizar un cambio en el diseño de layouts hacia diseños más regulares para poder mejorar la resolución de los patrones. Sin embargo, todavía no está claro el grado de regularidad que se debe introducir y como medir los beneficios y los perjuicios de los diseños regulares. El objetivo de esta tesis es buscar el grado de regularidad necesario para combatir las variaciones de litografía y mejorar la calidad del layout de un diseño. Las principales contribuciones para conseguirlo son: (1) la definición de diversas reglas de diseño de layout para mitigar las variaciones de litografía; (2) la propuesta de un modelo para estimar el yield paramétrico y así evaluar el impacto de la litografía en el diseño de layout; (3) el diseño de una métrica para analizar la calidad de un layout (LQM) incluyendo una métrica para capturar el grado de regularidad de un diseño (RM) y; (4) la creación de diferentes tipos de layout explotando los beneficios de la regularidad, referidos como Adaptative Lithography Aware Regular Cell Designs (ALARCs). La primera parte de la tesis, propone las diversas reglas de diseño para layouts regulares derivadas de simulaciones de litografía de tal manera que las fuentes de variación de litografía son minimizadas. Además, se propone una metodología de diseño para layouts regulares, referida como "gate biasing" para contrarrestar las variaciones sistemáticas dependientes del layout, las variaciones en la ventana de proceso del sistema litográfico y el efecto de puerta no rectilínea para configurar la longitud del canal del transistor correctamente. La segunda parte de la tesis, detalla el modelo de estimación del yield de litografía para predecir mediante un número reducido de simulaciones de litografía la cantidad de distorsión que se espera en un layout impreso debida a "hotspots". Se propone una eficiente metodología que identifica los distintos patrones de un layout, los simplifica para facilitar el análisis de los patrones y los clasifica en relación a la degradación predecida mediante simulaciones de litografía. El modelo de yield se calibra utilizando medidas de tiempo de un número reducido de idénticos circuitos de test implementados en una tecnología CMOS de 40nm y de esta manera, se utilizan datos de silicio para obtener una estimación realista del yield. La tercera parte de este trabajo, presenta una métrica para medir la calidad del layout (LQM), que considera diversos aspectos para dar una evaluación global de un diseño mediante un único valor. La LQM puede ajustarse mediante la asignación de diferentes pesos para cada métrica de evaluación o modificando los parámetros analizados. La LQM se configura mediante dos conjuntos de medidas diferentes. Además, ésta incluye una métrica de regularidad (RM) para capturar el grado de regularidad que se aplica en un diseño. Finalmente, esta disertación presenta los distintos diseños ALARC para una tecnología de 40nm utilizando diversos grados de regularidad y diferentes impactos en área. La calidad de estos diseños se demuestra creando automáticamente una librería de 266 celdas incluyendo celdas combinacionales y secuenciales y, sintetizando diversos circuitos ITC'99. Las librerías regulares solo presentan un 9% de impacto en área comparado con diseños de celdas estándar 2D y por tanto proponiendo diseños competitivos en área. La evaluación de los circuitos considerando la LQM muestra que los diseños regulares pueden mejorar otros diseños 2D dependiendo de la implementación del layout

Low Power SoC Design

The design of Low Power Systems-on-Chips (SoC) in very deep submicron technologies becomes a very complex task that has to bridge very high level system description with low-level considerations due to technology defaults and variations and increasing system and circuit complexity. This paper describes the major low-level issues, such as dynamic and static power consumption, temperature, technology variations, interconnect, DFM, reliability and yield, and their impact on high-level design, such as the design of multi-Vdd, fault-tolerant, redundant or adaptive chip architectures. Some very low power System-on-Chip (SoC) will be presented in three domains: wireless sensor networks, vision sensors and mobile TV

Strong, thorough, and efficient memory protection against existing and emerging DRAM errors

Memory protection is necessary to ensure the correctness of data in the presence of unavoidable faults. As such, large-scale systems typically employ Error Correcting Codes (ECC) to trade off redundant storage and bandwidth for increased reliability. Single Device Data Correction (SDDC) ECC mechanisms are required to meet the reliability demands of servers and large-scale systems by tolerating even severe faults that disable an entire memory chip. In the future, however, stronger memory protection will be required due to increasing levels of system integration, shrinking process technology, and growing transfer rates. The energy-efficiency of memory protection is also important as DRAM already consumes a significant fraction of system energy budget. This dissertation develops a novel set of ECC schemes to provide strong, safe, flexible, and thorough protection against existing and emerging types of DRAM errors. This research also reduces energy consumption of such protection while only marginally impacting performance. First, this dissertation develops Bamboo ECC, a technique with strongerthan-SDDC correction and very safe detection capabilities (≥ 99.999994% of data errors with any severity are detected). Bamboo ECC changes ECC layout based on frequent DRAM error patterns, and can correct concurrent errors from multiple devices and all but eliminates the risk of silent data corruption. Also, Bamboo ECC provides flexible configurations to enable more adaptive graceful downgrade schemes in which the system continues to operate correctly after even severe chip faults, albeit at a reduced capacity to protect against future faults. These strength, safety, and flexibility advantages translate to a significantly more reliable memory sub-system for future exascale computing. Then, this dissertation focuses on emerging error types from scaling process technology and increasing data bandwidth. As DRAM process technology scales down to below 10nm, DRAM cells are becoming more vulnerable to errors from an imperfect manufacturing process. At the same time, DRAM signal transfers are getting more susceptible to timing and electrical noises as DRAM interfaces keep increasing signal transfer rates and decreasing I/O voltage levels. With individual DRAM chips getting more vulnerable to errors, industry and academia have proposed mechanisms to tolerate these emerging types of errors; yet they are inefficient because they rely on multiple levels of redundancy in the case of cell errors and ad-hoc schemes with suboptimal protection coverage for transmission errors. Active Guardband ECC and All-Inclusive ECC make systematic use of ECC and existing mechanisms to provide thorough end-to-end protection without requiring redundancy beyond what is common today. Finally, this dissertation targets the energy efficiency of memory protection. Frugal ECC combines ECC with fine-grained compression to provide versatile and energy-efficient protection. Frugal ECC compresses main memory at cache-block granularity, using any left over space to store ECC information. Frugal ECC allows more energy-efficient memory configurations while maintaining SDDC protection. Its tailored compression scheme minimizes insufficiently compressed blocks and results in acceptable performance overhead. The strong, thorough, and efficient protection described by this dissertation may allow for more aggressive design of future computing systems with larger integration, finer process technology, higher transfer rates, and better energy efficiencyElectrical and Computer Engineerin

Design, Fabrication, and Run-time Strategies for Hardware-Assisted Security

Today, electronic computing devices are critically involved in our daily lives, basic infrastructure, and national defense systems. With the growing number of threats against them, hardware-based security features offer the best chance for building secure and trustworthy cyber systems. In this dissertation, we investigate ways of making hardware-based security into a reality with primary focus on two areas: Hardware Trojan Detection and Physically Unclonable Functions (PUFs). Hardware Trojans are malicious modifications made to original IC designs or layouts that can jeopardize the integrity of hardware and software platforms. Since most modern systems critically depend on ICs, detection of hardware Trojans has garnered significant interest in academia, industry, as well as governmental agencies. The majority of existing detection schemes focus on test-time because of the limited hardware resources available at run-time. In this dissertation, we explore innovative run-time solutions that utilize on-chip thermal sensor measurements and fundamental estimation/detection theory to expose changes in IC power/thermal profile caused by Trojan activation. The proposed solutions are low overhead and also generalizable to many other sensing modalities and problem instances. Simulation results using state-of-the-art tools on publicly available Trojan benchmarks verify that our approaches can detect Trojans quickly and with few false positives. Physically Unclonable Functions (PUFs) are circuits that rely on IC fabrication variations to generate unique signatures for various security applications such as IC authentication, anti-counterfeiting, cryptographic key generation, and tamper resistance. While the existence of variations has been well exploited in PUF design, knowledge of exactly how variations come into existence has largely been ignored. Yet, for several decades the Design-for-Manufacturability (DFM) community has actually investigated the fundamental sources of these variations. Furthermore, since manufacturing variations are often harmful to IC yield, the existing DFM tools have been geared towards suppressing them (counter-intuitive for PUFs). In this dissertation, we make several improvements over current state-of-the-art work in PUFs. First, our approaches exploit existing DFM models to improve PUFs at physical layout and mask generation levels. Second, our proposed algorithms reverse the role of standard DFM tools and extend them towards improving PUF quality without harming non-PUF portions of the IC. Finally, since our approaches occur after design and before fabrication, they are applicable to all types of PUFs and have little overhead in terms of area, power, etc. The innovative and unconventional techniques presented in this dissertation should act as important building blocks for future work in cyber security