Next generation optical access networks and coexistence with legacy PONs

Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmission capacities up to 2.5 Gb/s down and 1.25 Gb/s up, among multiple users. Research on high-speed electronics and Wavelength Division Multiplexing (WDM) has allowed the emergence of what is known as the second generation PON (NG-PON2), which specify aggregated capacities up to 40 Gb/s, stacking four channels at symmetric data rates of 10 Gb/s each, for residential scenarios. Nevertheless, the capacity per channel is still shared between multiple users due to the use of TDM. Moreover, the optical spectrum efficiency is low because channels are widely spaced (50 to 100 GHz). In addition, the sensitivity, reach and number of users is limited as consequence of using direct detection (DD) systems. In consequence, and due to the increase in bandwidth demands of new multimedia applications, it is necessary to propose solutions that cope with this tendency and, even more important, that can coexist with legacy systems, being one of the major requirements of network operators to guarantee a smooth and non-disruptive technology migration. In this thesis, a breakthrough technology such as Ultra-Dense WDM (UDWDM) that allows to allocate a large number of channels spaced only by a few GHz is used. This approach consent to envision the concept of Wavelength-to-the-User, where each costumer can be served with dedicated bandwidth links. The key technologies are based on coherent systems, with inherent wavelength selectivity and improved sensitivity compared to DD systems, thanks to the booster action of a tunable local oscillator (LO) laser. Because of cost is the main constraint in access networks, especially at the customer premises equipment (Optical Network Unit - ONU), in this thesis, a new class of coherent transceivers, based on low-cost direct modulated lasers and simplified receiver schemes, are proposed and experimentally tested. Moreover, the issue of coexistence is investigated through theoretical studies and real-time implementations, demonstrating full compatibility with legacy systems. Between the proposed solutions, a simple technique to adjust digitally the direct phase modulation of a distributed feedback (DFB) laser is presented to support flexible transmission rates. Next, several multilevel phase modulation formats for achieving higher transmission rates and better spectral efficiency are experimentally compared. Subsequently, the topic of photonic integration is addressed, demonstrating for the first time an 8-ary hybrid amplitude and phase modulated transmitter (Tx), by using a low-cost, small-footprint and energy efficient dual electro-absorption modulated laser (DEML). Finally, two novel proposals, to reduce the complexity of heterodyne and intradyne detection, are provided to face the typical issue of complexity and high-cost of coherent systems. The former explores the possibility of using only one DFB laser as LO and Tx at the ONU. The later demonstrates for the first time, a novel phase time diversity technique alternating phase modulation at each complex component (in-phase - I and quadrature - Q) achieving a 10 Gb/s' transmission with polarization independence.En la actualidad, la Fibra hasta el Hogar es una de las soluciones más prometedoras para proporcionar servicios de banda ancha en las redes de acceso. Sin embargo, la fibra se usa de manera poco eficiente, ya que la mayoría de los sistemas implementados todavía están basados en redes ópticas pasivas de multiplexación por división en el tiempo (TDM-PON) que brindan capacidades de transmisión compartidas entre múltiples usuarios de hasta 2.5 Gb/s y 1.25 Gb/s. La investigación en electrónica de alta velocidad y la multiplexación por división de longitud de onda (WDM) ha permitido el surgimiento de lo hoy se conoce como PON de segunda generación (NG-PON2), que especifica capacidades agregadas de hasta 40 Gb/s, apilando cuatro canales a velocidades de datos simétricas de 10 Gb/s cada uno, para escenarios residenciales. Sin embargo, la capacidad por canal todavía se comparte entre múltiples usuarios debido al uso de TDM. Además, la eficiencia en el uso del espectro óptico es baja porque los canales están muy separados (50 a 100 GHz). Asimismo, la sensibilidad, el alcance y el número de usuarios están limitados debido al uso de sistemas de detección directa. En consecuencia, y debido al aumento de las demandas de ancho de banda de las nuevas aplicaciones multimedia, es necesario proponer soluciones que respondan a esta tendencia y, lo que es más importante, que puedan coexistir con sistemas heredados, siendo uno de los principales requisitos de los operadores de red para garantizar una migración de tecnología fluida y sin interrupciones. En esta tesis, se utiliza una tecnología de vanguardia, como la multiplexación por división ultra densa de longitud de onda (UDWDM) que permite distribuir un gran número de canales espaciados solo por unos pocos GHz. Este enfoque permite vislumbrar el concepto de longitud de onda para el usuario, donde cada cliente puede usar enlaces de ancho de banda dedicados. Las tecnologías clave están basadas en los sistemas coherentes, con selectividad de longitud de onda inherente y sensibilidad mejorada en comparación con los sistemas de detección directa, gracias al efecto de amplificación óptica de un láser oscilador local (LO) sintonizable. Debido a que el costo es la principal restricción en las redes de acceso, especialmente del equipo en las instalaciones del cliente (unidad de red óptica - ONU), en ésta tesis, una nueva clase de transceptores coherentes, basados en láseres de bajo coste modulados directamente y esquemas de recepción simplificados, son propuestos y probados experimentalmente. Además, el problema de la coexistencia es investigado a través de estudios teóricos y experimentos en tiempo real, demostrando compatibilidad total con los sistemas heredados. Entre las soluciones propuestas, se presenta una técnica simple para ajustar digitalmente la modulación de fase directa de un láser de retroalimentación distribuida (DFB), y admitir velocidades de transmisión flexibles. Acto seguido, se comparan experimentalmente varios formatos multinivel de modulación de fase, para lograr tasas de transmisión más altas y una mejor eficiencia espectral. Posteriormente, se aborda el tema de la integración fotónica, demostrando por primera vez un transmisor (Tx) con modulación híbrida de fase y amplitud de ocho puntos, mediante el uso de un dispositivo pequeño, de bajo coste y eficiente energéticamente, como lo es el láser dual de electro-absorción modulada (DEML). Finalmente, se presentan dos propuestas novedosas para reducir la complejidad de la detección heterodina e intradina, afrontando el problema típico de la complejidad y alto coste de los sistemas coherentes. La primera explora la posibilidad de usar solo un láser DFB en la ONU, como LO y Tx. La segunda, demuestra por primera vez, una nueva técnica de diversidad fase en el tiempo, que alterna la modulación de fase en cada componente del plano complejo (fase-I y cuadratura-Q) logrando una transmisión de 10 Gb / s / λ con independencia de polarizaciónPostprint (published version

Next generation optical access networks and coexistence with legacy PONs

Nowadays, Fiber-to-the-Home is one of the most promising solutions to provide broadband services in access networks. However, the fiber is inefficiently used as most of the deployed systems are still based on Time Division Multiplexing Passive Optical Networks (TDM-PONs) providing shared transmission capacities up to 2.5 Gb/s down and 1.25 Gb/s up, among multiple users. Research on high-speed electronics and Wavelength Division Multiplexing (WDM) has allowed the emergence of what is known as the second generation PON (NG-PON2), which specify aggregated capacities up to 40 Gb/s, stacking four channels at symmetric data rates of 10 Gb/s each, for residential scenarios. Nevertheless, the capacity per channel is still shared between multiple users due to the use of TDM. Moreover, the optical spectrum efficiency is low because channels are widely spaced (50 to 100 GHz). In addition, the sensitivity, reach and number of users is limited as consequence of using direct detection (DD) systems. In consequence, and due to the increase in bandwidth demands of new multimedia applications, it is necessary to propose solutions that cope with this tendency and, even more important, that can coexist with legacy systems, being one of the major requirements of network operators to guarantee a smooth and non-disruptive technology migration. In this thesis, a breakthrough technology such as Ultra-Dense WDM (UDWDM) that allows to allocate a large number of channels spaced only by a few GHz is used. This approach consent to envision the concept of Wavelength-to-the-User, where each costumer can be served with dedicated bandwidth links. The key technologies are based on coherent systems, with inherent wavelength selectivity and improved sensitivity compared to DD systems, thanks to the booster action of a tunable local oscillator (LO) laser. Because of cost is the main constraint in access networks, especially at the customer premises equipment (Optical Network Unit - ONU), in this thesis, a new class of coherent transceivers, based on low-cost direct modulated lasers and simplified receiver schemes, are proposed and experimentally tested. Moreover, the issue of coexistence is investigated through theoretical studies and real-time implementations, demonstrating full compatibility with legacy systems. Between the proposed solutions, a simple technique to adjust digitally the direct phase modulation of a distributed feedback (DFB) laser is presented to support flexible transmission rates. Next, several multilevel phase modulation formats for achieving higher transmission rates and better spectral efficiency are experimentally compared. Subsequently, the topic of photonic integration is addressed, demonstrating for the first time an 8-ary hybrid amplitude and phase modulated transmitter (Tx), by using a low-cost, small-footprint and energy efficient dual electro-absorption modulated laser (DEML). Finally, two novel proposals, to reduce the complexity of heterodyne and intradyne detection, are provided to face the typical issue of complexity and high-cost of coherent systems. The former explores the possibility of using only one DFB laser as LO and Tx at the ONU. The later demonstrates for the first time, a novel phase time diversity technique alternating phase modulation at each complex component (in-phase - I and quadrature - Q) achieving a 10 Gb/s' transmission with polarization independence.En la actualidad, la Fibra hasta el Hogar es una de las soluciones más prometedoras para proporcionar servicios de banda ancha en las redes de acceso. Sin embargo, la fibra se usa de manera poco eficiente, ya que la mayoría de los sistemas implementados todavía están basados en redes ópticas pasivas de multiplexación por división en el tiempo (TDM-PON) que brindan capacidades de transmisión compartidas entre múltiples usuarios de hasta 2.5 Gb/s y 1.25 Gb/s. La investigación en electrónica de alta velocidad y la multiplexación por división de longitud de onda (WDM) ha permitido el surgimiento de lo hoy se conoce como PON de segunda generación (NG-PON2), que especifica capacidades agregadas de hasta 40 Gb/s, apilando cuatro canales a velocidades de datos simétricas de 10 Gb/s cada uno, para escenarios residenciales. Sin embargo, la capacidad por canal todavía se comparte entre múltiples usuarios debido al uso de TDM. Además, la eficiencia en el uso del espectro óptico es baja porque los canales están muy separados (50 a 100 GHz). Asimismo, la sensibilidad, el alcance y el número de usuarios están limitados debido al uso de sistemas de detección directa. En consecuencia, y debido al aumento de las demandas de ancho de banda de las nuevas aplicaciones multimedia, es necesario proponer soluciones que respondan a esta tendencia y, lo que es más importante, que puedan coexistir con sistemas heredados, siendo uno de los principales requisitos de los operadores de red para garantizar una migración de tecnología fluida y sin interrupciones. En esta tesis, se utiliza una tecnología de vanguardia, como la multiplexación por división ultra densa de longitud de onda (UDWDM) que permite distribuir un gran número de canales espaciados solo por unos pocos GHz. Este enfoque permite vislumbrar el concepto de longitud de onda para el usuario, donde cada cliente puede usar enlaces de ancho de banda dedicados. Las tecnologías clave están basadas en los sistemas coherentes, con selectividad de longitud de onda inherente y sensibilidad mejorada en comparación con los sistemas de detección directa, gracias al efecto de amplificación óptica de un láser oscilador local (LO) sintonizable. Debido a que el costo es la principal restricción en las redes de acceso, especialmente del equipo en las instalaciones del cliente (unidad de red óptica - ONU), en ésta tesis, una nueva clase de transceptores coherentes, basados en láseres de bajo coste modulados directamente y esquemas de recepción simplificados, son propuestos y probados experimentalmente. Además, el problema de la coexistencia es investigado a través de estudios teóricos y experimentos en tiempo real, demostrando compatibilidad total con los sistemas heredados. Entre las soluciones propuestas, se presenta una técnica simple para ajustar digitalmente la modulación de fase directa de un láser de retroalimentación distribuida (DFB), y admitir velocidades de transmisión flexibles. Acto seguido, se comparan experimentalmente varios formatos multinivel de modulación de fase, para lograr tasas de transmisión más altas y una mejor eficiencia espectral. Posteriormente, se aborda el tema de la integración fotónica, demostrando por primera vez un transmisor (Tx) con modulación híbrida de fase y amplitud de ocho puntos, mediante el uso de un dispositivo pequeño, de bajo coste y eficiente energéticamente, como lo es el láser dual de electro-absorción modulada (DEML). Finalmente, se presentan dos propuestas novedosas para reducir la complejidad de la detección heterodina e intradina, afrontando el problema típico de la complejidad y alto coste de los sistemas coherentes. La primera explora la posibilidad de usar solo un láser DFB en la ONU, como LO y Tx. La segunda, demuestra por primera vez, una nueva técnica de diversidad fase en el tiempo, que alterna la modulación de fase en cada componente del plano complejo (fase-I y cuadratura-Q) logrando una transmisión de 10 Gb / s / λ con independencia de polarizació

Digital Radio Encoding and Power Amplifier Design for Multimode and Multiband Wireless Communications

The evolution of wireless technology has necessitated the support of multiple communication standards by mobile devices. At present, multiple chipsets/radios operating at predefined sets of modulation schemes, frequency bands, bandwidths and output power levels are used to achieve this objective. This leads to higher component counts, increased cost and limits the capacity to cope with future communication standards. In order to tackle different wireless standards using a single chipset, digital circuits have been increasingly deployed in radios and demonstrated re-configurability in different modulation schemes (multimode) and frequency bands (multiband). Despite efforts and progress made in digitizing the entire radio, the power amplifier (PA) is still designed using an conventional approach and has become the bottleneck in digital transmitters, in terms of low average power efficiency, poor compatibility with modern CMOS technology and limited re-configurability. This research addresses these issues from two aspects. The first half of the thesis investigates signal encoding issues between the modulator and PA. We propose, analyze and evaluate a new hybrid amplitude/time signal encoding scheme that significantly improves the coding efficiency and dynamic range of a digitally modulated power amplifier (DMPA) without significantly increasing design complexity. The proposed hybrid amplitude/time encoding scheme combines both the amplitude domain and the time domain to optimally encode information. Experimental results show that hybrid amplitude/time encoding results in a 35% increase in the average coding efficiency with respect to conventional time encoding, and is only 6.7% lower than peak efficiency when applied to a Wireless Local Area Network (WLAN) signal with a peak to average power ratio equal to 9.9 dB. A new DMPA architecture, based on the proposed hybrid encoding, is also proposed. The second half of this thesis presents the design, analysis and implementation of a CMOS PA that is amenable to the proposed hybrid encoding scheme. A multi-way current mode class-D PA architecture has been proposed and realized in 130 nm CMOS technology. The designed PA has satisfied the objectives of wide bandwidth (1.5 GHz - 2.7 GHz at 1 dB output power), and high efficiency (PAE 63%) in addition to demonstrating linear responses using the proposed digital encoding. A complete digital transmitter combining the encoder and the multi-way PA was also investigated. The overall efficiency is 27% modulating 7.3 dB peak to average power ratio QAM signals

Adaptive modulation techniques for passive optical networks

Smart use of fiber networks to increase capacity to the hom

On the Role of Power Electronics in Visible Light Communication

The continuous demand of increasing data rates provided by wireless communication systems is contributing to saturating the RF spectrum. Visible Light Communication (VLC) systems aim to alleviate this congestion by using the visible light spectrum. These systems have been proposed to make use of High-Brightness LEDs (HB-LEDs) not only for lighting, but also for transmitting information by rapidly changing the intensity of the emitted light. A critical issue is that VLC requires a fast HB-LED driver in order to reproduce the target light intensity waveforms, which can include components of several MHz. Consequently, the HB-LED drivers proposed to date are based on the use of an RF Power Amplifier (RFPA). These devices provide the required speed, but suffer from very high power losses. To overcome this drawback, different solutions based on the use of fast-response DC/DC converters are presented in this paper. Several DC/DC converters, either to be used instead of an RFPA or to help an RFPA to achieve high efficiency, are thus analysed. The proposed HB-LED drivers enable the implementation of VLC transmitters without sacrificing one of the most important advantages of HB-LED lighting, namely its high power efficienc

High Efficiency Microwave Amplifiers and SiC Varactors Optimized for Dynamic Load Modulation

The increasing use of mobile networks as the main source of internet connectivity is creating challenges in the infrastructure. Customer demand is a moving target and continuous hardware developments are necessary to supply higher data rates in an environmentally sustainable and cost effective way. This thesis reviews and advances the status of realizing wideband and high efficiency power amplifiers, which will facilitate improvements in network capacity and energy efficiency. Several demonstrator PAs are proposed, analyzed, designed, and characterized: First, resistive loading at higher harmonics in wideband power amplifier design suitable for envelope tracking (ET) is proposed. A 40 dBm decade bandwidth 0.4–4.1 GHz PA is designed, with 10–15 dB gain and 40–62% drain efficiency. Its versatility is demonstrated by digital pre-distortion (DPD) linearized measurements resulting in adjacent channel leakage ratios (ACLR) lower than −46 dBc for various downlink signals (WCDMA, LTE, WiMAX). Second, a theory for class-J microwave frequency dynamic load modulation (DLM) PAs is derived. This connects transistor technology and load network requirements to enable power-scalable and bandwidth conscious designs. A 38 dBm PA is designed at 2.08 GHz, maintaining efficiencies >45% over 8 dB of output power back-off (OPBO) dynamic range. From this pre-study a fully packaged 86-W peak power version at 2.14 GHz is designed. ACLR after DPD is −46 dBc at a drain efficiency of 34%. For DLM PAs there is a need for varactors with large effective tuning range and high breakdown voltage. For this purpose, SiC Schottky diode varactors are developed with an effective tuning range of 6:1 and supporting a 3:1 tuning ratio at 36 V of RF swing. Nonlinear characterization to enable Q-factor extraction in the presence of distortion is proposed and demonstrated by multi-harmonic active source- and load-pull, offering insights to tunable network design. Third, a method to evaluate and optimize dual-RF input PAs, while catering to higher harmonic conditions and transistor parasitics, is proposed. The method is validated by a PA design having a peak power of 44 +/- 0.9 dBm and 6 dB OPBO PAE exceeding 45% over a 1–3 GHz bandwidth. The results in this thesis contribute with a novel device and analysis of high efficiency and wideband PAs, aiding in the design of key components for future energy efficient and high capacity wireless systems

Correction of errors and harmonic distortion in pulse-width modulation of digital signals

Article number 153991Pulse-Width (PW) modulation is widely used in those applications where an analog or digital signal has to be encoded in the time domain as a binary stream, such as switched-mode power amplifiers in transmitters of modern telecommunication standards, high-resolution digital signal conversion using single-bit digital-to-analog converters, and many others. Due to the fact that digital signals are sampled in the time domain, the quality of the resulting PW modulated waveforms is worsened by harmonic distortion. Multilevel PW modulation has been proposed to reduce these adverse effects, but the modulated waveform is no longer binary. In this paper, the mechanisms by which harmonic distortion is produced are analyzed. As a result, the distortion terms are mathematically quantified and used to correct the errors. Note that a correction network based on a simple subtraction of the distortion terms from the PW modulated signal would produce a waveform that would no longer be binary. The proposed correction network is implemented in the digital domain and, by means of a sigma-delta modulator, preserves the binary feature of the PW modulated output.Ministerio de Ciencia, Innovación y Universidades (España) RTI201- 099189-B-C2

Energy efficiency perspectives of PMR networks

Recently, the concern about energy efficiency in wireless communications has been growing rapidly. Manufacturers and researchers have developed innovative solutions, highlighting the benefits in reducing operational expenditures (OPEX) and carbon footprint. Professional Mobile Radio (PMR) systems, like Terrestrial Trunked Radio (TETRA), have been designed to provide voice and data services to professional users. The energy consumption is one of the critical aspects of PMR broadband solutions and a major constraint for PMR services. The future convergence of PMR to the LTE system introduces a new topic in the research discussion about the energy efficiency of wireless systems. This paper focuses on the feasibility of energy efficient solutions for current and potentially future PMR networks, by providing a mathematical formulation of power consumption in TETRA base stations and assessing possible business models and energy saving solutions for enhanced mission-critical operations. The energy efficiency evaluation has been performed by taking into account the traffic load of a deployed TETRA regional network: in the considered network scenario with 150 base stations, significant OPEX savings up to 70 thousand Euros per year of operation are achieved. Moreover, the proposed solutions allow for saving more than 1 ton of CO 2 per year